Displaying 20 results from an estimated 10000 matches similar to: "Released ManageSieve v0.10.5 for Dovecot v1.1.9"
2009 Feb 12
0
Released Sieve v0.1.3 and ManageSieve v0.11.3 for Dovecot v1.2.beta1
Hello Dovecot users,
It has been about two months since the last release of the new Sieve
implementation and the ManageSieve service for Dovecot v1.2. Therefore,
this release contains quite a few changes. It adds new sieve features
like the enotify extension and multiscript support. Also, quite a few
(user-reported) bugs were fixed since the last release.
Changelog Sieve v0.1.3:
*
2009 Feb 12
0
Released Sieve v0.1.3 and ManageSieve v0.11.3 for Dovecot v1.2.beta1
Hello Dovecot users,
It has been about two months since the last release of the new Sieve
implementation and the ManageSieve service for Dovecot v1.2. Therefore,
this release contains quite a few changes. It adds new sieve features
like the enotify extension and multiscript support. Also, quite a few
(user-reported) bugs were fixed since the last release.
Changelog Sieve v0.1.3:
*
2009 Jan 15
1
managesieve-login and segfault
You can also write to mailing list without subscribing. Anyway, I
haven't written managesieve-login code, Ccing Stephan.
On Thu, 2009-01-15 at 17:00 +0100, Wolfgang.Friebel at desy.de wrote:
> Hi,
>
> sorry that do not write to the list, I am not subscribed yet. I have read
> the november 2008 thread where managesieve-login does a segfault. As it
> happened to me as well and
2009 Jan 21
1
docecot managesieve global filter, service name
I do have two questions related to the managesieve setup in dovecot
1) I did setup a global sieve filter, that is invoked if a user has no
other sieve filter. If a user installs a sieve filter and activates it
(PUTSCRIPT, SETACTIVE) then the sieve filter gets compiled (.sievec) and
deliver does use it.
If I want to deactivate the filter (SETACTIVE "") only the symlink (to the
.sieve
2010 Oct 06
2
dovecot-2.0-pigeonhole-0.2.1 installation in wrong lib dir?
I am building dovecot-2.0-pigeonhole-0.2.1 (dovecot-2.0.5, but that does
not matter) with dovecot-config in place (in /usr/lib64/dovecot) on a
64bit Linux (RHEL5):
./configure --with-dovecot=/usr/lib64/dovecot
The libs needed for several executables in libexec such as
/usr/libexec/dovecot/managesieve-login are not installed in /usr/lib64 but
in /usr/lib64/dovecot. Therefore the executable
2008 Nov 17
0
ManageSieve SECURITY hole: virtual users can edit scripts of other virtual users (all versions)
Hello,
While updating the ManageSieve implementation to the latest draft
specification I noticed a major omission in the way script names are
handled. Essentially, script names are directly appended to the sieve
storage directory path and suffixed with '.sieve'. This does not take
the use of '../' in script names into account. Therefore, clever virtual
users that know the
2008 Nov 17
0
ManageSieve SECURITY hole: virtual users can edit scripts of other virtual users (all versions)
Hello,
While updating the ManageSieve implementation to the latest draft
specification I noticed a major omission in the way script names are
handled. Essentially, script names are directly appended to the sieve
storage directory path and suffixed with '.sieve'. This does not take
the use of '../' in script names into account. Therefore, clever virtual
users that know the
2009 Apr 07
0
Modified websieve for use with dovecot
In order to let users construct a sieve filter using a GUI I have taken
websieve.pl from Alain Turbide (for use with Cyrus) and modified it to
work with dovecot.
In order to get it working quickly I have removed all the code I did not
need (e.g. ldap support, password authentication) and coded Kerberos5 auth
(via GSSAPI or SASL) in. I understand that this makes the work mostly
useless to
2009 Jan 23
0
v1.1.9 released
http://dovecot.org/releases/1.1/dovecot-1.1.9.tar.gz
http://dovecot.org/releases/1.1/dovecot-1.1.9.tar.gz.sig
Lots of small dbox fixes, hopefully migrations from Maildir are now
working correctly. I'm also planning on releasing v1.2.beta1 in a few
days.
+ Sending SIGUSR2 to dovecot-auth now also logs statistics about cache
inserts. This could help figuring out auth cache size.
+
2009 Jan 23
0
v1.1.9 released
http://dovecot.org/releases/1.1/dovecot-1.1.9.tar.gz
http://dovecot.org/releases/1.1/dovecot-1.1.9.tar.gz.sig
Lots of small dbox fixes, hopefully migrations from Maildir are now
working correctly. I'm also planning on releasing v1.2.beta1 in a few
days.
+ Sending SIGUSR2 to dovecot-auth now also logs statistics about cache
inserts. This could help figuring out auth cache size.
+
2009 Apr 18
0
Released Sieve v0.1.5 and ManageSieve v0.11.4 for Dovecot v1.2.rc3 and ManageSieve v0.10.6 for Dovecot v1.1.14
Hello Dovecot users,
This is a simultaneous release of new versions of Sieve-related software
for Dovecot v1.1 and v1.2. Only the Sieve implementation itself has seen
significant development. The ManageSieve packages only have small fixes
and the ManageSieve patches are updated as usual to match the new
Dovecot releases.
Changelog Sieve v0.1.5:
* Ported the implementation of the Sieve
2009 Apr 18
0
Released Sieve v0.1.5 and ManageSieve v0.11.4 for Dovecot v1.2.rc3 and ManageSieve v0.10.6 for Dovecot v1.1.14
Hello Dovecot users,
This is a simultaneous release of new versions of Sieve-related software
for Dovecot v1.1 and v1.2. Only the Sieve implementation itself has seen
significant development. The ManageSieve packages only have small fixes
and the ManageSieve patches are updated as usual to match the new
Dovecot releases.
Changelog Sieve v0.1.5:
* Ported the implementation of the Sieve
2007 Nov 18
0
MANAGESIEVE patch v9 for dovecot 1.0.7
Hello Dovecot users,
Since v8, I have updated the MANAGESIEVE patch to fix various issues
reported by users. Although I planned to upgrade the next release after
v8 to Dovecot v1.1, I release these changes for Dovecot 1.0 first. If no
further major issues are found, I can upgrade to Dovecot 1.1.
Change Log V9
-------------
+ Definitively fixed the segfault mentioned in V8. It proved to be
2017 Feb 08
0
Managesieve cannot access script store
Op 2/5/2017 om 8:53 PM schreef dovelist:
> Hi,
>
> I am trying to get sieve working on a new OpenSuse leap 42.2 install.
> On my 'old' OpenSuse 13.2 machine it worked fine.
>
> The problem is that Managesieve can't access the script store and
> won't let me create any script. It says permission denied on ~/sieve
> directory. See log below. I 've
2009 Apr 10
2
Dovecot crash
tonight dovecot 1.2beta4 crashed for the first time with an assertion
failed. See attached log file. Around that time nobody was logged in into
dovecot and there were no other mail deliveries going on.
The mail in question should have been delivered to three recipients, one
got the mail, the two others not.
There is unfortunately no core dump file. I have attached the dovecot -n
output as
2009 Mar 30
1
Empty To: Header and message_address_parse
Using dovecot 1.2beta (but earlier versions should behave similarly) we
have a problem in conjunction with empty To: headers and the RT request
tracker.
RT sends mail out using Bcc: and no To: header at all. To make some
mailers happy one can configure to send a dummy To: header, which we do.
Our To header looks like:
To: "AdminCc of rt Ticket #123456":;
The message_address_parse
2008 Feb 13
1
ManageSieve v0.10.0 released for Dovecot 1.1.beta15
Hello Dovecot users,
I finally managed to upgrade the ManageSieve implementation to
dovecot-1.1. This also resulted in major restructuring of the code. The
actual ManageSieve implementation is now available as a separate package
and the patch now only contains the changes to the dovecot-1.1 tree that
are necessary to use the ManageSieve service. The patch and the new
package no longer
2008 Oct 23
0
ManageSieve v0.11.0 released for Dovecot 1.2.alpha3
Hello Dovecot users,
I have composed a release of the ManageSieve service for Dovecot v1.2. I
also added two new capabilities that were added to the ManageSieve
specification. Just like the last few releases, this new release
supports the new Sieve plugin already.
Change Log v0.11.0
-------------------
* Upgraded to Dovecot v1.2
* Added support for new ManageSieve capabilities RENAME
2008 Oct 23
0
ManageSieve v0.11.0 released for Dovecot 1.2.alpha3
Hello Dovecot users,
I have composed a release of the ManageSieve service for Dovecot v1.2. I
also added two new capabilities that were added to the ManageSieve
specification. Just like the last few releases, this new release
supports the new Sieve plugin already.
Change Log v0.11.0
-------------------
* Upgraded to Dovecot v1.2
* Added support for new ManageSieve capabilities RENAME
2008 May 04
1
New ManageSieve releases: v0.10.2 for Dovecot 1.1.rc4 and v9.3 for Dovecot 1.0.13
Hello Dovecot users,
Recently, I was pointed towards a problem in the managesieve SASL
implementation. As it turns out there was a bug in handling mechanisms
that expect more than a single client response. That is why the PLAIN
mechanism works and the (obsolete) LOGIN mechanism fails (along with
probably many others). This problem was present in both v9.2 and v0.10.1
for Dovecot 1.0 and 1.1