similar to: device error without a check sum error ?

I have configured a test system with a mirrored rpool and one hot spare. I powered the systems off, pulled one of the disks from rpool to simulate a hardware failure. The hot spare is not activating automatically. Is there something more i should have done to make this work ? pool: rpool state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for

Hello, Has anyone encountered the following error message, running Solaris 10 u8 in an LDom. bash-3.00# devfsadm devfsadm: write failed for /dev/.devfsadm_dev.lock: Bad exchange descriptor bash-3.00# zpool status -v rpool pool: rpool state: DEGRADED status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in

# lucreate -n B85 Analyzing system configuration. Hi, after typing # lucreate -n B85 I get the following error: No name for current boot environment. INFORMATION: The current boot environment is not named - assigning name <BE1>. Current boot environment is named <BE1>. Creating initial configuration for primary boot environment <BE1>. ERROR: Unable to determine major and

Hi, LUN is connected to solaris 10u9 from NETAP FAS2020a with ISCSI. I''m changing LUN size on netapp and solaris format see new value but zpool still have old value. I tryed zpool export and zpool import but it didn''t resolve my problem. bash-3.00# format Searching for disks...done AVAILABLE DISK SELECTIONS: 0. c0d1 <DEFAULT cyl 6523 alt 2 hd 255 sec 63>

I spend yesterday all day evading my data of one of the Windows disks, so that I can add it to the pool. Using mount-ntfs, it''s a pain due to its slowness. But once I finished, I thought "Cool, let''s do it". So I added the disk using the zero slice notation (c0d0s0), as suggested for performance reasons. I checked the pool status and noticed however that the pool size

Dear all, Two of our MDS have got repeatedly read-only error recently after once e2fsck on lustre 1.8.5. After the MDT mounted for a while, the kernel will reports errors like: Oct 8 20:16:44 mainmds kernel: LDISKFS-fs error (device cciss!c0d1): ldiskfs_ext_check_inode: bad header/extent in inode #50736178: invalid magic - magic 0, entries 0, max 0(0), depth 0(0) Oct 8 20:16:44 mainmds

Folks: I am unable to get my opensolaris sn-b85 domU to start up in an opensolaris sn-b85 dom0. I am booted to xvm. Other systems, such as Fedora 8, WinXP Pro, W2k3 server, W2k8 server and Windows Vista startup normally. I have used the following to build the domU: # mkfile -n 25g /solhvm/solhvm.img # ls -l /solhvm total 269 -rw------T 1 root root 26843545600 Jul 7 10:37 solhvm.img

Hi, I have the following partions on my laptop, Inspiron 6000, from fdisk: 1 Other OS 0 11 12 0 2 EXT LBA 12 2561 2550 26 3 Active Solaris2 2562 9728 7167 74 First one is for Dell utilities. Second one is NTFS and the third is ZFS. I am currently using OpenSolaris 2009.06

Original the array was attach to an HP server via a Smart Array Controller.(which I didn't setup, I just inherited the problem) This controller no longer recognizes the array even though the front panel of the array indicates its intact. I then took the array and plugged it into my Centos server and it recognized it ... cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun:

Hey, I''m currently running on Nexenta alpha 6 and I have some corrupted data in a pool. The output from sudo zpool status -v data is: pool: data > state: ONLINE > status: One or more devices has experienced an error resulting in data > corruption. Applications may be affected. > action: Restore the file in question if possible. Otherwise restore the > entire

any idea what the reason for this error is? [2006-11-07 13:59:31 xend 3167] DEBUG (__init__:1072) exception looking up device number for 0: [Errno 2] No such file or directory: ''/dev/0'' my config file looks like this: name = "solaris" memory = "400" kernel = "/solaris/platform/i86xen/kernel/amd64/unix" extra =

Hi all, I would like to add a new partition to my ZFS pool but it looks like it''s more stricky than expected. The layout of my disk is the following: - first partition for Windows. I want to keep it. (no formatting !) - second partition for OpenSolaris.This is where I have all the Solaris slices (c0d0s0 etc). I have a single ZFS pool. OpenSolaris boots on ZFS. - third partition: a FAT

I''m trying to add extra zvols to a Solaris10 DomU, sv_113 Dom0 I can use virsh attach-disk <name> <zvol> hdb --device phy to attach the zvol as c0d1. Replacing hdb by hdd gives me c1d1 but then that is it. Being able to attach several more zvols would be nice but even being able to get at c1d0 would be useful Am I missing something or can I only attach to hda/hdb/hdd?

Hi, all, I think I''m missing a concept with import and export. I''m working on installing a Nexenta b134 system under Xen, and I have to run the installer under hvm mode, then I''m trying to get it back up under pv mode. In that process the controller names change, and that''s where I''m getting tripped up. I do a successful install, then I boot OK,

Hello, Since I''ve got my disk partitioning sorted out now, I want to move my BE from the old disk to the new disk. I created a new zpool, named RPOOL for distinction with the existing "rpool". I then did lucreate -p RPOOL -n new95 This completed without error, the log is at the bottom of this mail. I have not yet dared to run luactivate. I also have not yet dared set the

Full_Name: Scot Wilcoxon Version: 1.8.1 OS: Linux Submission from: (NULL) (209.98.144.16) return() is not documented. It should also be mentioned in the R Reference section for function(). Apparently the last result of a function is the return value from a function, except when the function is terminated with a return() with an argument.

I can't install freebsd 6.0 STABLE amd64 on my notebook: HP Pavilion 2420la AMD Turion ML 32 , 1024 RAM, 80 GB HD, ATI Radeon XPRESS 200M. I try all modes , default, whitout acpi, safe mode. In all the cases after the next message the installation doesn't work: timecounters tick every 1000 msec Linux ELF exec handler install lo0.bpf attached I installed linux with parameter noapic

Hi there. With OpenSSH 3.0.2p1 on Solaris, the locale does not appear to get set correctly at login, as it does with, say telnet: /etc/default/init: TZ=GB CMASK=022 LC_COLLATE=en_GB.ISO8859-1 LC_CTYPE=en_GB.ISO8859-1 LC_MESSAGES=C LC_MONETARY=en_GB.ISO8859-1 LC_NUMERIC=en_GB.ISO8859-1 LC_TIME=en_GB.ISO8859-1 When logging in via SSH: scot /home/scot > locale LANG=

... though I tried, read and typed the last 4 hours; still no clue. Please, can anyone give a clear idea on how this works: Get the content of c0d1s1 to c0d0s7 ? c0d1s1 is pool home and active; c0d0s7 is not active. I have followed the suggestion on http://www.opensolaris.org/os/community/zfs/demos/zfs_demo.pdf % sudo zfs snapshot home at backup % zfs list NAME USED AVAIL REFER

Not sure if this possible, but I have a KVM guest running Solaris 10 with the OS on ZFS and I am trying to use libguestfs/guestfish/guestmount to get to the VM. I am running Red Hat EL 5.4 with EPEL rpms as required. The VM is on a LV and it boots fine, but I can't seem to get the syntax correct to get libguestfs to deal with it. Guestmount seemed like the best option because it supports FUSE