similar to: ZFS Pool Question

Hello everyone! I have to implement the functionality of mounting all VM disks/partitions. E.g. if a VM has 2 disks of 2 partitions each (I get it from virt-filesystems), I want to get the following structure on host node after mount: mnt/ ------hdd0/ -------------volume1/ -------------volume2/ ------hdd1/ -------------volume1/ -------------volume2/ I'd like to use guestmount due to

Hi Host: VirtualBox 2.1.0 (WinXP SP3) Guest: OSol 5.11snv_101b IDE Primary Master: 10 GB, rpool IDE Primary Slave: 10 GB, empty format output: AVAILABLE DISK SELECTIONS: 0. c3d0 <DEFAULT cyl 1302 alt 2 hd 255 sec 63> /pci0,0/pci-ide at 1,1/ide at 0/cmdk at 0,0 1. c3d1 <drive unknown> /pci0,0/pci-ide at 1,1/ide at 0/cmdk at 1,0 # ls

I''m attempting to expand a root pool for a VMware VM that is on an 8GB virtual disk. I mirrored it to a 20GB disk and detached the 8GB disk. I did "installgrub" to install grub onto the second virtual disk, but I get a kernel panic when booting. Is there an extra step I need to perform to get this working? Basically I did this: 1. Created a new 20GB virtual disk. 2. Booted

On Fri, Nov 06, 2015 at 04:16:21PM +0300, Maxim Perevedentsev wrote: > Hello everyone! > > I have to implement the functionality of mounting all VM disks/partitions. > > E.g. if a VM has 2 disks of 2 partitions each (I get it from > virt-filesystems), I want to get the following structure on host > node after mount: > mnt/ > ------hdd0/ > -------------volume1/ >

Ok Guys, I've done a tonne of hunting around on this problem, but can't find much help. I'm running: asterisk 1.4.19.1 libpri 1.4.3 and zaptel 1.4.9.2 which I believe has been modified by RedFone to add the ztd-ethmf module. My interface is a RedFone foneBridge2 4 Span; and I'm connecting to a BT E1 PRI / ISDN30e with 15 lines on span 1, and a legacy Panasonic PBX on span 4. Upon

Hi, I updated my installation to snv_105 from pkg.opensolaris.org/dev. Booting xvm kernel doesn''t work. The last working xvm version that I tested was on snv_98. I filed a bug report earlier on http://defect.opensolaris.org/bz/show_bug.cgi?id=5905 Is anyone using xmv on opensolaris 2008.11 (stable or dev)? Is it suppose to work, or is it one of those

On 11/06/2015 05:08 PM, Richard W.M. Jones wrote: > On Fri, Nov 06, 2015 at 04:16:21PM +0300, Maxim Perevedentsev wrote: >> Hello everyone! >> >> I have to implement the functionality of mounting all VM disks/partitions. >> >> E.g. if a VM has 2 disks of 2 partitions each (I get it from >> virt-filesystems), I want to get the following structure on host

https://bugs.freedesktop.org/show_bug.cgi?id=28810 Summary: Blank consoles (Ctrl+Alt+Fn) after X starts on Arch Linux with FX5200 card. Product: xorg Version: git Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: critical Priority: medium Component: Driver/nouveau

Computer A runs my samba server. Has unix extensions = off, wide links = on (don't think this one matters with unix extensions off...) This way, if I have a symlink on my shares, clients see it as a normal file, not as a symlink. This works fine, even for symlinks to files outside the shares paths. Except when the symlink points to a file that is on a CIFS mount. So say I have computer B

In the last few days my performance has gone to hell. I''m running: # uname -a SunOS nissan 5.11 snv_150 i86pc i386 i86pc (I''ll upgrade as soon as the desktop hang bug is fixed.) The performance problems seem to be due to excessive I/O on the main disk/pool. The only things I''ve changed recently is that I''ve created and destroyed a snapshot, and I used

I''ve got knee deep into learning how to use Opensolaris and zfs, and I see now that my goal of home zfs server may have been better served if I had partitioned the install disk leaving some of the 60GB to be added to a zpool. First, how much space does a working OS need. I don''t mean bare minimum but to be comfortable and have some growing room (on the install disk)?

Hi there. I just got a new Adaptec RAID 51645 controller in because the old (other type) was malfunctioning. It is paired with 16 Seagate 15k5 disks, of which two are used with hardware RAID 1 for OpenSolaris snv_98, and the rest is configured as striped mirrors as a zpool. I created a zfs filesystem on this pool with a blocksize of 8K. This server has 64GB of memory and will be running

Dear ZFS experts, I have 2 SATA 500 GB Hard Drive on my Dual Core PC I have installed OpenSolaris 2008.11 using Live CD I got from Sun Tech Days in Singapore Now, using all the guidelines I got here at Indiana Discussion, I can''t attach my second drive to rpool to make them mirror Initially I was playing around with similar configuration in VirtualBox, and it does not succeed. Finally

I have a Sony lib-162 tape library hooked up to an adaptec 39160 scsi controller. I''m running OpenSolaris / Indiana snv_98 with the CADP160 driver installed from a SXCE dvd (snv_99). When I boot without xvm, I can run "mt config" and see the configuration information for the first drive in the library. Under xvm, some scsi operations still work - I can access the changer, move

Hi, when installing windows server 2008 Std hvm I get always a blue screen telling me: ''a clock interrupt was not received on a secondary processor within the allocated time interval'' I googled around and found, that this occured with vista as well: http://lists.xensource.com/archives/html/xen-changelog/2007-01/msg00170.html Config is: + virt-install --name=win2008ss

Hi, System: Netra 1405, 4x450Mhz, 4GB RAM and 2x146GB (root pool) and 2x146GB (space pool). snv_98. After a panic the system hangs on boot and manual attempts to mount (at least) one dataset in single user mode, hangs. The Panic: Dec 27 04:42:11 base ^Mpanic[cpu0]/thread=300021c1a20: Dec 27 04:42:11 base unix: [ID 521688 kern.notice] [AFT1] errID 0x00167f73.1c737868 UE Error(s) Dec 27

Hi all, I'd appreciate any pointers or advise regarding the following issue with files written by M$ Office on Samba 3.0.32 on snv_98 (OpenSolaris) on a ZFS filesystem: samba share: [sharename] read only = No browseable = yes writeable = yes directory mask = 0770 create mask = 0770 delete readonly = Yes acl check permissions =

How can I diagnose why a resilver appears to be hanging at a certain percentage, seemingly doing nothing for quite a while, even though the HDD LED is lit up permanently (no apparent head seeking)? The drives in the pool are WD Raid Editions, thus have TLER and should time out on errors in just seconds. ZFS nor the syslog however were reporting any IO errors, so it weren''t the disks.

Hi, We have been testing the localboot functionality today and it could be useful if localboot was a com32 module rather than a configuration directive so that one can use it on the boot prompt, rather than require a menu entry/alias at all times. A more userfriendly localboot.c32 could do this and allow eg for friendly device-names. localboot next localboot floppy0 localboot hdd0 or

Hi! I have a problem with ZFS and most likely the SATA PCI-X controllers. I run opensolaris 2008.11 snv_98 and my hardware is Sun Netra x4200 M2 with 3 SIL3124 PCI-X with 4 eSATA ports each connected to 3 1U diskchassis which each hold 4 SATA disks manufactured by Seagate model ES.2 (500 and 750) for a total of 12 disks. Every disk has its own eSATA cable connected to the ports on the PCI-X