similar to: Problem with use zfs on Mac OS X and linux

Hi there, juliusr at rainforest:~$ cat /etc/issue Ubuntu 9.04 \n \l juliusr at rainforest:~$ dpkg -l | grep -i zfs-fuse ii zfs-fuse 0.5.1-1ubuntu5 I have two 320gb sata disks connected to a PCI raid controller: juliusr at rainforest:~$ lspci | grep -i sata 00:08.0 RAID bus controller: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev

I''ve installed Open Solaris 2009.06 on a machine with 5 identical 1TB wd green drives to create a ZFS nas. The intended install is one drive dedicated to the OS and the remaining 4 drives in a raidz1 configuration. The install is working fine, but creating the raidz1 pool and rebooting is causing the machine report "Cannot find active partition" upon reboot. Below is command

I have 6 zfs pools and after rebooting init 6 the vpath device path names have changed for some unknown reason. But I can''t detach, remove and reattach to the new device names....ANY HELP! please pjde43m01 - - - - FAULTED - pjde43m02 - - - - FAULTED - pjde43m03 - - - - FAULTED - poas43m01 - - - -

the os ''s / first is on mirror /dev/dsk/c1t0d0s0 and /dev/dsk/c1t1d0s0, and then created home_pool using mirror, here is the mirror information. pool: omp_pool state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM omp_pool ONLINE 0 0 0 mirror ONLINE 0 0 0 c1t3d0s0 ONLINE

Hi experts zpool import shows some weird config of an old zpool bash-3.00# zpool import pool: data1 id: 7539031628606861598 state: FAULTED status: One or more devices are missing from the system. action: The pool cannot be imported. Attach the missing devices and try again. see: http://www.sun.com/msg/ZFS-8000-3C config: data1 UNAVAIL insufficient replicas

hi list, initial situation: SunOS alusol 5.11 snv_86 i86pc i386 i86pc SunOS Release 5.11 Version snv_86 64-bit 3 USB HDDs on 1 USB hub: zpool status: state: ONLINE NAME STATE READ WRITE CKSUM usbpool ONLINE 0 0 0 mirror ONLINE 0 0 0 c7t0d0p0 ONLINE 0 0 0 c8t0d0p0

# zpool list NAME SIZE USED AVAIL CAP HEALTH ALTROOT jira-app-zpool 272G 330K 272G 0% ONLINE - The following command hangs forever. If I reboot the box , zpool list shows online as I mentioned the output above. # zpool destroy -f jira-app-zpool How can get rid of this pool and any reference to it. bash-3.00# zpool status pool: jira-app-zpool state: UNAVAIL

Hi All, I posted this in a different threat, but it was recommended that I post in this one. Basically, I have a 3 drive raidz array on internal Seagate drives. running build 64nv. I purchased 3 add''l USB drives with the intention of mirroring and then migrating the data to the new USB drives. I accidentally added the 3 USB drives in a raidz to my original storage pool, so now I have 2

Hi all, IHACWHAC (I have a colleague who has a customer - hello, if you''re listening :-) who''s trying to build and test a scenario where he can salvage the data off the (internal ?) disks of a T2000 in case the sysboard and with it the on-board raid controller dies. If I understood correctly, he replaces the motherboard, does some magic to get the raid config back, but even

hail, I write just to make sure its dead. I've lost the first disk on a ZFS pool (jbod). Now I can't mount it with only the second disk. The first disk clicks to death :( [root@optimus ~]# zpool status pool: pool state: UNAVAIL status: One or more devices could not be opened. There are insufficient replicas for the pool to continue functioning. action: Attach the missing

Good morning, I have a problem with ZFS: ZFS filesystem version 4 ZFS storage pool version 15 Yesterday my comp with Freebsd 8.2 releng shutdown with ad4 error detached,when I copy a big file... and after reboot in 2 wd green 1tb say me goodbye. One of them die and other with zfs errors: Apr 24 04:53:41 Flash root: ZFS: vdev I/O failure, zpool=zroot path= offset=187921768448 size=512 error=6

Hi, I have lost a ZFS volume and I am hoping to get some help to recover the information ( a couple of months worth of work :( ). I have been using ZFS for more than 6 months on this project. Yesterday I ran a "zvol status" command, the system froze and rebooted. When it came back the discs where not available. See bellow the output of " zpool status", "format"

Hey, On Sat, Oct 31, 2009 at 5:03 PM, Victor Latushkin <Victor.Latushkin at sun.com> wrote: > Donald Murray, P.Eng. wrote: >> >> Hi, >> >> I''ve got an OpenSolaris 2009.06 box that will reliably panic whenever >> I try to import one of my pools. What''s the best practice for >> recovering (before I resort to nuking the pool and

Not an really good subject, I know but that''s kind of what happend. I''m trying to build an backup-solution server, Windows users using OSCAR (which uses rsync) to sync their files to an folder and when complete takes a snapshot. It has worked before but then I turned on the -R switch to rsync and when I then removed the folder with rm -rf it crashed. I didn''t save what

Hi, folks, testing zfs. I'd created a zpoolz2, ran a large backup onto it. Then I pulled one drive (11-drive, one hot spare pool), and it resilvered with the hot spare. zpool status -x shows me state: DEGRADED status: One or more devices could not be used because the label is missing or invalid. Sufficient replicas exist for the pool to continue functioning in a degraded state.

somehow I have issue replacing my disk. [20:09:29] root at adas: /root > zpool status mypooladas pool: mypooladas state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Attach the missing device and online it using ''zpool online''. see:

I have a pool with 3 partitions in it. However, one of them is no longer valid, the disk was removed and modified so that the original partition is no longer available. I cannot get zpool to remove it from the pool. How do I tell zfs to take this item out of the pool if not with "zfs remove" ? Thanks, Wyllys here is my pool: zpool status pool: bigpool state: FAULTED status:

Hello, I am a final year computer engg student and I am planning to implement zfs on linux, I have gone through the articles posted on solaris . Please let me know about the feasibility of zfs to be implemented on linux. waiting for valuable replies. thanks in advance. On 9/14/07, zfs-discuss-request at opensolaris.org <zfs-discuss-request at opensolaris.org> wrote: > Send

mark wrote: > Hi, folks, > > > testing zfs. I'd created a zpoolz2, ran a large backup onto it. Then I > pulled one drive (11-drive, one hot spare pool), and it resilvered with > the hot spare. zpool status -x shows me state: DEGRADED > status: One or more devices could not be used because the label is missing > or invalid. Sufficient replicas exist for the pool to

I have a strange problem with a faulted zpool (two way mirror): [root at einstein;0]~# zpool status poolm pool: poolm state: FAULTED scrub: none requested config: NAME STATE READ WRITE CKSUM poolm UNAVAIL 0 0 0 insufficient replicas mirror UNAVAIL 0 0 0 corrupted data c2t0d0s0 ONLINE 0