similar to: Cannot remove slog device from zpool

Hi all, First, I''ll say my intent is not to spam a bunch of lists, but after posting to opensolaris-discuss I had someone communicate with me offline that these lists would possibly be a better place to start. So here we are. For those on all three lists, sorry for the repetition. Second, this message is meant to solicit help in diagnosing the issue described below. Any hints on

I have a Sony lib-162 tape library hooked up to an adaptec 39160 scsi controller. I''m running OpenSolaris / Indiana snv_98 with the CADP160 driver installed from a SXCE dvd (snv_99). When I boot without xvm, I can run "mt config" and see the configuration information for the first drive in the library. Under xvm, some scsi operations still work - I can access the changer, move

Machine is running x86 snv_94 after recent upgrade from opensolaris 2008.05. ZFS and zpool reported no troubles except suggesting upgrade for from ver.10 to ver.11. seemed like a good idea at the time. system up for several days after that point then took down for some unrelated maintenance. now will not boot the opensol, drops to grub prompt, no menus. zfs was mirrored on two disks c6d0s0 and

In the last few days my performance has gone to hell. I''m running: # uname -a SunOS nissan 5.11 snv_150 i86pc i386 i86pc (I''ll upgrade as soon as the desktop hang bug is fixed.) The performance problems seem to be due to excessive I/O on the main disk/pool. The only things I''ve changed recently is that I''ve created and destroyed a snapshot, and I used

Hi all, I installed another OpenSolaris (snv_129) in VirtualBox 3.1.0 on Windows because snv_130 doesn''t boot anymore after installation of VirtualBox guest additions. Older builds before snv_129 were running fine too. I like some features of this OS, but now I end with something funny. I installed default snv_129, installed guest additions -> reboot, set

I''m looking for a way to backup my entire system, the rpool zfs pool to an external HDD so that it can be recovered in full if the internal HDD fails. Previously with Solaris 10 using UFS I would use ufsdump and ufsrestore, which worked so well, I was very confident with it. Now ZFS doesn''t have an exact replacement of this so I need to find a best practice to replace it.

During boot, I get the following error: Nov 16 09:16:41 sol11 svc.startd[7]: [ID 652011 daemon.warning] svc:/system xvm/store:default: Method "/lib/svc/method/xenstored start" failed with exit status 96. Nov 16 09:16:41 sol11 svc.startd[7]: [ID 748625 daemon.error] system/xvm/store:default misconfigured: transitioned to maintenance (see ''svcs -xv'' for details) It

Hi, After upgrading to b95 of OSOL/Indiana, and doing a ZFS upgrade to the newer revision, all arrays I have using ZFS mirroring are displaying errors. This started happening immediately after ZFS upgrades. Here is an example: ormandj at neutron.corenode.com:~$ zpool status pool: rpool state: DEGRADED status: One or more devices has experienced an unrecoverable error. An attempt was

Is it possible to convert Solaris 10 DomU from hvm to pv?? Dom0 is Opensolaris b132. Possibly any Documentation about this? Here is config of Solaris DomU: <domain type=''xen'' id=''1''> <name>Solaris-10</name> <uuid>c505f6c3-b37b-8268-fe46-f10b3277238b</uuid> <memory>2097152</memory>

I have three zpools on a server and want to add a mirrored pair of ssd''s for the ZIL. Can the same pair of SSDs be used for the ZIL of all three zpools or is it one ZIL SLOG device per zpool? -- This message posted from opensolaris.org

I have a pool with a single SLOG device rated at Y iops. If I add a second (non-mirrored) SLOG device also rated at Y iops will my zpool now theoretically be able to handle 2Y iops? Or close to that? Thanks, Ray

I created snapshot for my whole zpool (zfs version 3): zfs snapshot -r tank@`date +%F_%T` then trid to send it to the remote host: zfs send tank at 2008-07-25_09:31:03 | ssh user at 10.0.1.14 -i identitykey ''zfs receive tank/tankbackup'' but got the error "zfs: command not found" since user is not superuser, even though it is in the root group. I found

This past weekend, but holiday was ruined due to a log device "replacement" gone awry. I posted all about it here: http://jmlittle.blogspot.com/2008/05/problem-with-slogs-how-i-lost.html In a nutshell, an resilver of a single log device with itself, due to the fact one can''t remove a log device from a pool once defined, cause ZFS to fully resilver but then attach the log

After googling around and reading the material on the opensolaris.org xvm community site, I still do not understanding the configuration of networking and would appreciate some assistance. Problem: I have successfully installed an hvm domU running Windows XP on opensolaris 2005.11 (build 94), and when the laptop (lenovo t61, core2 9300) is connected via the e1000g0 interface networking works

I have tried to define a domain or using virt-install both failed. Could some one give me the correct command to do this? I used: virt-install --nographics --paravirt --os-type=solaris --os-variant=opensolaris --ram 1024 --name cam-host --disk path=/dev/dsk/c0t600A0B800049E902000008EB4A9CE744d0p0,driver=phy -l /export/media_images/sol-nv-b121-x86-dvd.iso thx, florian

I''ve got a CentOS 5.3 dom0 with Xen 3.4.1-rc5 (or so). I''ve tried the same stuff below with 3.4.0, no difference. I''m trying to install 2009.06 PV domU based on instructions from [1] and [2]. I can run the install fine, I can also get the kernel and boot archive (from [2]) after the install. But for the life of me I can''t get the installed domU to boot. If I

(From the README) # Jeb Campbell <jebc at c4solutions.net> NOTE: This is last resort if you need your data now. This worked for me, and I hope it works for you. If you have any reservations, please wait for Sun to release something official, and don''t blame me if your data is gone. PS -- This worked for me b/c I didn''t try and replace the log on a running system. My

While testing a zpool with a different storage adapter using my "blkdev" device, I did a test which made a disk unavailable -- all attempts to read from it report EIO. I expected my configuration (which is a 3 disk test, with 2 disks in a RAIDZ and a hot spare) to work where the hot spare would automatically be activated. But I''m finding that ZFS does not behave this way

Hello everyone, As one of the steps of improving my ZFS home fileserver (snv_134) I wanted to replace a 1TB disk with a newer one of the same vendor/model/size because this new one has 64MB cache vs. 16MB in the previous one. The removed disk will be use for backups, so I thought it''s better off to have a 64MB cache disk in the on-line pool than in the backup set sitting off-line all

I currently am sharing out zfs ISCSI volumes from a solaris server to a Mac. I installed ZFS locally on the mac, created a local zfs pool and put a zfs filesystem on the local volume. Can I now mount the volume on the Solaris server and see the data? -- This message posted from opensolaris.org