similar to: My 500-gig ZFS is gone: insufficient replicas, corrupted data

Hi, I am using FreeBSD 8.2 and went to add 4 new disks today to expand my offsite storage. All was working fine for about 20min and then the new drive cage started to fail. Silly me for assuming new hardware would be fine :( The new drive cage started to fail, it hung the server and the box rebooted. After it rebooted, the entire pool is gone and in the state below. I had only written a few

I made a bad judgment and now my raidz pool is corrupted. I have a raidz pool running on Opensolaris b85. I wanted to try out freenas 0.7 and tried to add my pool to freenas. After adding the zfs disk, vdev and pool. I decided to back out and went back to opensolaris. Now my raidz pool will not mount and got the following errors. Hope someone expert can help me recover from this error.

Well this is a new one.... Illumos/Openindiana let me add a device as a hot spare that evidently has a different sector alignment than all of the other drives in the array. So now I''m at the point that I /need/ a hot spare and it doesn''t look like I have it. And, worse, the other spares I have are all the same model as said hot spare. Is there anything I can do with this or

Hi, all, I think I''m missing a concept with import and export. I''m working on installing a Nexenta b134 system under Xen, and I have to run the installer under hvm mode, then I''m trying to get it back up under pv mode. In that process the controller names change, and that''s where I''m getting tripped up. I do a successful install, then I boot OK,

Hi people, Is there somebody who knows how to install SAMBA 2.0 on Solaris 2.6? Thanks, Rivaldo

Hello, Dovecot writes to the log file lines like these: May 10 13:19:04 mailserver dovecot: IMAP(office): copy -> Trash: uid=1131, msgid=<45E669BE.8090705 at example.com>, box=Sent May 10 13:19:05 mailserver dovecot: IMAP(office): deleted: uid=1131, msgid=<45E669BE.8090705 at example.com>, box=Sent May 10 13:53:08 mailserver dovecot: IMAP(office): copy -> Trash: uid=1719,

Say I have a raidz of 3 disks: ad4 ad6 ad8 I want to tell zfs that I am pulling ad4 and replacing it with a new disk on the same controller, but I can''t get it to release its hold on ad4. [0138][root at ztest:/home/matt]# zpool offline pond ad4 Bringing device ad4 offline [0140][root at ztest:/home/matt]# zpool replace pond ad4 cannot replace ad4 with ad4: ad4 is busy

Hi After my previous email about the SETFEATURES SET TRANSFER MODE timeout on (msgid 441AA807.5090100@wfeet.za.net , 17 March 14:18 GMT + 2 on freebsd-stable), I installed FreeBSD 6.1 BETA 4 and upgraded to a 6-STABLE kernel, running the box in 'safe' mode to do so. I now, however, get a slightly different error message: ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout

Hi, after one month with gmirror and gjournal running on a 7.0-RELEASE #p2 amd64 (built from latest CVS source), the box hung a couple of times when on high disk load. Finally, while building some port it won't boot for no reason obvious to me. This is what I get with kernel.geom.mirror.debug=2: ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 476940MB <SAMSUNG HD501LJ

I''m having following issue .. i import the zpool and it shows pool imported correctly but after few seconds when i issue command zpool list .. it does not show any pool and when again i try to import it says device is missing in pool .. what could be the reason for this .. and yes this all started after i upgraded the powerpath abcxxxx # zpool import pool: emcpool1 id:

One of our Solaris 10 update 3 servers paniced today with the following error: Sep 18 00:34:53 m2000ef savecore: [ID 570001 auth.error] reboot after panic: assertion failed: ss != NULL, file: ../../common/fs/zfs/space_map.c, line: 125 The server saved a core file, and the resulting backtrace is listed below: $ mdb unix.0 vmcore.0 > $c vpanic() 0xfffffffffb9b49f3() space_map_remove+0x239()

Hello,all I can't add samba to the domain with the command net join, the error is like this: net join -U usrname -S ***** Enter usrname's password: [2009/03/26 11:03:55, 0] utils/net_rpc_join.c:net_rpc_join_newstyle(393) Error in domain join verification (credential setup failed): NT_STATUS_INVALID_COMPUTER_NAME Unable to join domain **. I can ping the domain server and

Hello, I''ve been using Nexentastore Community Edition with no issues now for a while now, however last week I was going to rebuild a different system so I started to copy all the data off that to my to a raidz2 volume on me CE system. This was going fine until I noticed that they copy was stalled, as well as the entire system was non-responsive. I let it sit for several hours with no

I have a system that I''m trying to bring up with a mirrored rpool. I''m using DarkStar''s ZFS Root Mirror blog post as a guide (http://darkstar-solaris.blogspot.com/2008/09/zfs-root-mirror.html). When I get to step 3 I execute: pfexec prtvtoc /dev/rdsk/c7d0s2 | fmthard -s - /dev/rdsk/c7d1s2 I get: fmthard: Cannot open device /dev/rdsk/c7d1s2 - Permission denied Any

I had a single spare 500GB HDD and I decided to install a FreeBSD file server in it for learning purposes, and I moved almost all of my data to it. Yesterday, and naturally after no longer having backups of the data in the server, I had a controller failure (SiS 180 (oh, the quality)) and the HDD was considered unplugged. When I noticed a few checksum failures on `zfs status` (including two on

After multiple power outages caused by storms coming through, I can no longer access /dev/zvol/dsk/poolname, which are hold l2arc and slog devices in another pool I don''t think this is related, since I the pools are ofline pending access to the volumes. I tried running find /dev/zvol/dsk/poolname -type f and here is the stack, hopefully this someone a hint at what the issue is, I have

Does the keyword/action discard work by default or is there something I have to do in the configuration to get to work... maybe I missed something on http://wiki.dovecot.org/LDA/Sieve I have the following rule: if anyof ( header :contains ["Subject"] ["Test Discard"] ) { discard; stop; } but it delivers to INBOX with or w/o the "stop;". If I change

I am attempting to install 7.1-BETA2 (from CD) onto a PC with a Promise SX4060 RAID controller and two Seagate 120GB ATA disk drives. The boot from CD keeps repeating the following (error) messages: (I'm retyping here) ============================================================================ ================== ad4: WARNING - SETFEATURES SET TRANSFER MODE task queue timeout - completing

I have been using 2003 AD servers for winbind for many years, and now 2008 is phasing in, but I can't authenticate using the new servers, and I'm not sure what to do. All advice very welcome. This is a problem for me on both Gentoo (samba 3.0.33) and Debian Lenny (samba 3.0.24). For debugging, I ran winbind interactively and piped output to a file (winbindd -d 3 -i). I have also

Hi, according to http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/amr/amr.c?only_with_tag=RELENG_6 it seems MegaMGR for linux now can work. Any experience? -- Cris, member of G.U.F.I Italian FreeBSD User Group http://www.gufi.org/