similar to: Sync samba machine account between diffent samba versions - 4.1 to 4.15

On Fri, 17 May 2024 12:36:33 -0300 Gilberto Ferreira via samba <samba at lists.samba.org> wrote: > Hi there. > I have two samba servers, let's say srv01 and srv02. For that matter, > both are Zentyal Server 4 and 8, respectively. > In the srv01 there is samba version 4.1, which is in the network > 182.168.200.0/24, and which is by the way also the gateway to both >

Hi I am testing running tinc in switch mode. , my topology is as follows Site 1 (tinc-srv01) -> Site 2 (tinc-srv02) I have configured the bridge interfaces with ip addresses and able to ping between bridges. I then setup a server on each site and tested layer 2 connectivity between the two servers. Topology as follows. Server 1 - *Site 1* (tinc-srv01) -> *Site 2* (tinc-srv02) - Server 2

Hi Lars Thank you for reply. My apologies it is running in "*TAP*" mode. root at tinc-srv:~# tincd -n netname -D -d3 tincd 1.0.23 (Dec 5 2013 17:16:47) starting, debug level 3 /dev/net/tun is a Linux tun/tap device (tap mode) I have enabled ip forwarding and it seems that bridging rules is enabled root at tinc-srv02:~# cat /proc/sys/net/bridge/bridge-nf-call-iptables 1 root at

Hello Yazeed, Am Tue, 5 Apr 2016 11:26:55 +0300 schrieb Yazeed Fataar <yazeedfataar at gmail.com>: > [..] > > *Site 1* > Server -ping- Site 1 (tinc-srv01) - Success > Server -ping- Site 2 (tinc-srv02) - Success > Server -ping- Site 2 - Server 2 - Failure > > > *Site 2* > Server -ping- Site 2 (tinc-srv02) - Success > Server -ping- Site 1 (tinc-srv01) -

I've managed to configure a LVS Cluster to act as a transparent proxy squid farm, with a virtual server as load balancer, and three real servers. Because redirecting packets going to port 80 to port 3128 of squid in the load balancer doesn't works, the solution has a mix of ip route and iptables. Here is the script I wrote to configure transparent proxy. #!/bin/bash #Transparent proxy

Hi... I have had a problem when I am going to detach one specific LVM partitions of Xen, so I have been trying xm destroy <domain>, lvchange -an <lvm_partition>, lvremove -f.... So I haven''t had sucess. I restarted the server with init 1 yet and nothing... I have seem two specific process started xenwatch and xenbus, but I am not sure if this processes have some action over

Hi there, anyone in the Gluster Devel list. Any fix about this issue? May 14 07:05:39 srv01 vms[9404]: [2023-05-14 10:05:39.618424 +0000] C [gf-io-uring.c:612:gf_io_uring_cq_process_some] (-->/lib/x86_64 -linux-gnu/libglusterfs.so.0(+0x849ae) [0x7fb4ebace9ae] -->/lib/x86_64-linux-gnu/libglusterfs.so.0(+0x8a2e5) [0x7fb4ebad42e5] -->/lib /x86_64-linux-gnu/libglusterfs.so.0(+0x8a1a5)

The referenced GitHub issue now has a potential patch that could fix the problem, though it will need to be verified. Could you try to apply the patch and check if the problem persists ? On Mon, May 15, 2023 at 2:10?AM Gilberto Ferreira < gilberto.nunes32 at gmail.com> wrote: > Hi there, anyone in the Gluster Devel list. > > Any fix about this issue? > > May 14 07:05:39

Hi Xavi That's depend. Is it safe? I have this env production you know??? --- Gilberto Nunes Ferreira (47) 99676-7530 - Whatsapp / Telegram Em ter., 16 de mai. de 2023 ?s 07:45, Xavi Hernandez <jahernan at redhat.com> escreveu: > The referenced GitHub issue now has a potential patch that could fix the > problem, though it will need to be verified. Could you try to apply the

Hi Gilberto, On Tue, May 16, 2023 at 12:56?PM Gilberto Ferreira < gilberto.nunes32 at gmail.com> wrote: > Hi Xavi > That's depend. Is it safe? I have this env production you know??? > It should be safe, but I wouldn't test it on production. Can't you try it in any test environment before ? Xavi > > --- > Gilberto Nunes Ferreira > (47) 99676-7530 -

Hello, i am using samba4rc2. I have problems with the bind9 dlz module, i get very long response times from interal queries. root at s-srv01:~# dig s-srv04.test.local @192.168.0.4 ; <<>> DiG 9.8.0-P4 <<>> s-srv04.test.local @192.168.0.4 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 64478 ;; flags: qr aa rd ra;

Ok. No problem. I can test it in a virtual environment. Send me the path. Oh but the way, I don't compile gluster from scratch. I was used the deb file from https://download.gluster.org/pub/gluster/glusterfs/LATEST/Debian/ --- Gilberto Nunes Ferreira (47) 99676-7530 - Whatsapp / Telegram Em ter., 16 de mai. de 2023 ?s 09:21, Xavi Hernandez <jahernan at redhat.com> escreveu: >

Hi again I just noticed that there is some updates from glusterd apt list --upgradable Listing... Done glusterfs-client/unknown 11.0-2 amd64 [upgradable from: 11.0-1] glusterfs-common/unknown 11.0-2 amd64 [upgradable from: 11.0-1] glusterfs-server/unknown 11.0-2 amd64 [upgradable from: 11.0-1] libgfapi0/unknown 11.0-2 amd64 [upgradable from: 11.0-1] libgfchangelog0/unknown 11.0-2 amd64

On Tue, May 16, 2023 at 4:00?PM Gilberto Ferreira < gilberto.nunes32 at gmail.com> wrote: > Hi again > I just noticed that there is some updates from glusterd > > apt list --upgradable > Listing... Done > glusterfs-client/unknown 11.0-2 amd64 [upgradable from: 11.0-1] > glusterfs-common/unknown 11.0-2 amd64 [upgradable from: 11.0-1] > glusterfs-server/unknown 11.0-2

Anybody also has this error? May 14 07:05:39 srv01 vms[9404]: [2023-05-14 10:05:39.618424 +0000] C [gf-io-uring.c:612:gf_io_uring_cq_process_some] (-->/lib/x86_64 -linux-gnu/libglusterfs.so.0(+0x849ae) [0x7fb4ebace9ae] -->/lib/x86_64-linux-gnu/libglusterfs.so.0(+0x8a2e5) [0x7fb4ebad42e5] -->/lib /x86_64-linux-gnu/libglusterfs.so.0(+0x8a1a5) [0x7fb4ebad41a5] ) 0-: Assertion failed: May 14

Hi all, By some days around 12:00 o'clock I have the following problem with my SUSE Linux 2.6.11.4-21.9-default i686 i386 GNU/Linux, with Samba Version 3.0.21a-0.1-SUSE: xxx:~ # tail /var/log/samba/log.machine01 [2006/02/23 12:05:54, 1] smbd/sesssetup.c:reply_spnego_kerberos(180) Failed to verify incoming ticket! [2006/02/23 12:06:04, 0] tdb/tdbutil.c:tdb_log(772)

Using samba 2.2.7a with Winbind on a Redhat 8.0 machine - when I login locally with a domain username and password I get this message: "id: cannot find name for group ID 10000" -I seem to have full access to everything, so I'm not sure what effect this actually has - Ideas? Also, I'm trying to create some samba shares with NT domain group permissions. in the placeholder file

Can someone help me because I don't how this ha+ppening without messing it ? /var/log/samba/log.wb-COMPANY cli_rpc_open failed on pipe \NETLOGON to machine SRV01. Error was Write error: Broken pipe [2005/10/27 12:15:01, 0] rpc_client/cli_pipe.c:cli_rpc_close(1767) cli_rpc_open failed on pipe \NETLOGON to machine SRV01. Error was Write error: Broken pipe [2005/10/27 12:15:01, 0]

Hi all, I've got a (pacemaker + drbd) cluster running VMs. When the VM is running on another node, the local storage is Secondary, meaning that it can't be read or otherwise touched. As such, virsh thinks there is no storage and constantly prints errors like: ==== Aug 14 19:25:24 mk-a02n01.digimer.ca libvirtd[1655]: 2020-08-14 23:25:24.812+0000: 1679: error : qemuOpenFileAs:3119 :

-------- Original-Nachricht -------- > Datum: Fri, 23 Nov 2012 14:32:31 -0800 > Von: Matthieu Patou <mat at samba.org> > An: samba at lists.samba.org > Betreff: Re: [Samba] samba4 binddlz performance > On 11/19/2012 07:11 AM, Thomas Manninger wrote: > > Hello, > > > > i am using samba4rc2. > > > > I have problems with the bind9 dlz module, i get