similar to: Single user mode behaviour with serial console in 7.0RC2

Hi all, A recent thread inspired me to try getting a proper serial console working on a Supermicro X9SCL motherboard with IPMI. However I find that while I see loader messages and the getty I enabled after boot I don't get any kernel messages which does somewhat limit the utility.. The BMC creates COM3 (/dev/cuau2) which works with getty. I modified /boot/loader.conf like so..

I can't seem to get my serial terminal to work with my new system. I had a serial terminal connected to my old system that worked great and copied /boot.config, /boot/loader.conf and /etc/ttys settings over from it. The new system has a Gigabyte GA970A-UD3 board with just a serial header on the board. I bought a serial connector backplate in an electronics store and connected it to the

Due to an issue I'm having with 7.x, and trying to track it down, I spent tonight getting my server setup to allow my to break into the debugger when it hangs, and hopefully dump core ... But, although I *think* I've got it all, I'm obviously missing something, as it isn't breaking ... First ... I'm running a proliant server, and when I connect via SSH to ILO on that

I'm getting the following warning, and then the system locks: ACPI Warning: Incorrect checksum in table [(bunch of spaces)] - 0x29, should be 0x48 Here's a pic: http://db.tt/O6dxONzI System is on a SuperMicro C7X58 motherboard that I just upgraded to BIOS 2.0a, which I would like to stay on if possible. I tried adjusting all the ACPI related BIOS settings without success. Bryce

Hi, is the above supposed to work? I tried to follow what is written in the installation manual: unplugging the keyboard does nothing, booting with 'boot -h' gives me all the kernel's device probing messages on both the serial console and the normal console, but after 'mounting root from ...' sysinstall appears on the normal console. harti

Hi! Is there anyone interested in fixing 4.x-RELEASE serial console installation? Eugene _______________________________________________ freebsd-arch@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-arch To unsubscribe, send any mail to "freebsd-arch-unsubscribe@freebsd.org"

[1} Gert Hulselmans wrote: > > ...Thanks. > > I still think chain.c32 should be able to do a reverse partition > lookup, to determine from which partition it was booted. This would be > useful to boot ntldr, setupldr.bin, bootmgr, grldr, ... when you want > to boot it from the same partition as from which SYSLINUX is booted, > without specifying the partition explicitly

Hi all, I have had this problem since day 1 on my new server. It has run since November 15th 2008, and serve approx. 10 GB worth of web traffic per month for the main site and then some 40 domains with mail and small web pages. (hence - it's NOT that busy yet) I started with 7.1-RELEASE-pX since I didn't have problems straight off - but it didn't last long. After a few days of

Hello, I have a problem with loader. I recently upgraded from 6_rel to 7_rel. Now when I install world there is a problem booting. Here is what I do: cd /usr/src make buildworld make buildkernel KERNCONF=BLACK make installkernel KERNCONF=BLACK At this point I can reboot and all is good. After boot I install the new world: cd /usr/src mergemaster -p reboot into single user mode cd /usr/src make

Hi, As requested on IRC, here are the step-by-step instructions to reproduce the failure I see: On http://rom-o-matic.net/gpxe/gpxe-1.0.1/contrib/rom-o-matic/build.php: output format: .dsk NIC type: e1000_82540 x CONSOLE_PCBIOS x CONSOLE_SERIAL BANNER_TIMEOUT: 20 COMCONSOLE: 0x3F8 _ COMPRESERVE COMSPEED: 57600 COMDATA: 8 COMPARITY: 0 COMSTOP: 1 x DOWNLOAD_PROTO_TFTP x DOWNLOAD_PROTO_HTTP _

Hi. I have been experencing some filesystem problems for the last month or so. I was running 4.8-STABLE and updated to 5.1-RELEASE-p2. While I was running 4.8 and I tried to run a command that required hard disk activity, the process would 'hang' and I would no longer be able to ssh or telnet in. I would get stuck after typing in my login. Running 5.1 is a different story. I did a low

Hi there, sorry for rather long mail. Two verbose dmesgs and `pciconf -vl` outputs attached. trying to set up new machine based on ASUS P4BGL-MX motherboard, I'd encountered hangs after detecting pcib1 (ICH2). MB has rl 8100 ethernet chip onboard. This is for 4.8-R; however, machine hangs in very similar way also with 4.4-R and 5.1-R. Matrix of hangs: Onboard Ether External Ether Result

Try something like with(df, predict(smooth.spline(x = altitude, y = atm_values), deriv = 1)) Cheers, Andrew -- Andrew Robinson Chief Executive Officer, CEBRA and Professor of Biosecurity, School/s of BioSciences and Mathematics & Statistics University of Melbourne, VIC 3010 Australia Tel: (+61) 0403 138 955 Email: apro at unimelb.edu.au Website: https://researchers.ms.unimelb.edu.au/~apro

Hi everyone, I have a vector with atmospheric measurements (x-axis) that is obtained/calculated at different altitudes (y-axis). The altitude is uniformly distributed every 7 meters. For example my dataframe is: df <- dataframe( *altitude* = c(1005, 1012, 1019, 1026, 1033, 1040, 1047, 1054, 1061, 1068), *atm_values* = c(1.41, 1.40, 1.39, 1.38, 1.37, 1.37, 1.38, 1.36, 1.33, 1.31)

I have an Asus A8V-MX motherboard with an AMD Athlong 64 X2 3800+ CPU and I'm trying to run powerd to keep it cooler/quieter/greener. I'm running -STABLE (6.1-RC) cvsup'ed a couple of days ago, with a kernel config that consists of the SMP sample plus an atapicam device. I'm loading the cpufreq.ko module in /boot/loader.conf. I've attached my dmesg output and sysctl -a

this is 6.0-STABLE as for Mar 17. KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-PRERELEASE #2: Fri Mar 17 11:05:32 UTC 2006 vlad@host:/usr/src/sys/amd64/compile/DEF_WEB Timecounter

** Delivery incomplete ** There was a temporary problem delivering your message to curtiskwong101 at gmail.com. Gmail will retry for 47 more hours. You'll be notified if the delivery fails permanently. The response was: Receive rate too high -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello, The Xen community is working on a new virtualization mode (or maybe I should say an extension of HVM) to be able to run PV guests inside HVM containers without requiring a device-model (Qemu). One of the advantages of this new virtualization mode is that now it is much more easier to port guests to run under it (as compared to pure PV guests). Given that FreeBSD already supports

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 ============================================================================= FreeBSD-SA-03:12 Security Advisory FreeBSD, Inc. Topic: OpenSSH buffer management error Category: core, ports Module: openssh, ports_openssh,