similar to: Expresscard Wireless

Just recently bought a Dell E6410 with a Intel? HD Graphics with ExpressCard with I7-640m processor. Having some issues getting a graphical env to work. By just the looks of lspci X is wanting to use the VGA Compatable controller: Intel Corp Core Processor Intergrated graphics controller. Everything else is using Intel Corp Series 5/3400 Series Chipset. Has anyone else had any luck getting

I'm looking for a well-supported ExpressCard or PCMCIA/CardBus SCSI card that can do at least FastSCSI (Narrow, Wide not necessary) that is supported by CentOS 7. I have an Adaptec SlimSCSI 1460D, but it doesn't seem to be supported (it's previously supported by the aha152x driver). Any ideas are welcomed, other than 'just use a desktop.' I am not sure a USB or Firewire

Ok, got a quickie. I have an eSATA drive, a 750GB Seagate in an eSATA external enclosure, and a Silicon Image sil3132 ExpressCard controller for my laptop. The disk and controller work great in CentOS 5 (or F7, for that matter), if I specifically mount it. This is not how I want to have to use this drive, however. I want to hotplug it; that is, plug the controller into the laptop, and then

Hello, I have a problem with older version of anaconda linux installer. I have upgraded kernel in my distro, but, when this anaconda boot with new 3.4.52 kernel, can NOT find cdrom. As far as I understand, this is because the new kernel recognize cd drive as srX, scdX instead of older hdX with 2.6.18. At the moment I can not upgrade anaconda and forced this kernel to recognize it as before. Are

On 11/12/2013 06:52 PM, Bob Doolittle wrote: > For the record - I figured this out so am sharing the result for > posterity: > > The issue was that I didn't follow the instructions literally. Since, > once booted, my primary NIC name was "em1" I assumed I had to create > an initscript called ifcfg-em1 rather than ifcfg-eth0 as described in > the doc. But you

Hi all, How are things going ? Is there a way for me to individually identify each BRI channel on the Sirrix quad BRI board. The reason I ask is because our client uses the "Asterisk Flash Operator Panel" to monitor its external lines and transfer calls from the lines to the various SIP phones. The "Flash Operator Panel" requires that we set a static value for each line or

Hi, I have a compilation errors with chan_capi 0.1.0. I have : chan_capi.c:33:20 capi20.h: No such file or directory and a lot of errors with this error. The capi20.h is in /usr/srx/linux-2.4.18-14/drivers/isdn/eicon/capi20.h. So I don't know where the problem. Someone have a solution ? Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL:

Everyone, Have any of you installed ubiguiti wireless routers on your network? It looks like the setup requires the use of software; they have some packages that are ready made for Ubuntu and Debian, but not RedHat https://www.ubnt.com/download/unifi/unifi-ap-ac-pro Have any of you tried or succeeded in installation this on Centos 7.4? Greg Ennis

Hi guys, How's things going ? Got a bit of a weird one here that I've been unable to solve. I have a Panasonic PBX linked to a Sirrix Quad BRI card that is running in TE (ptp) mode in a Asterisk box - this then links through Internet to another Asterisk box via IAX2. When a user on the Panasonic PBX system dials the extension of my Sirrix Asterisk box, Asterisk answers and says

I am using R in Windows. I see that I will have to use batch processes with R. I will have to read and write text files, and run some R code; probably some external code too. I have never done scripting. Is there any document that explains simple steps with examples? I also have heard that Python is a good scripting language. Is it worth the effort? (I do not have too much free time, so if I could

Suppose I want to delete everything in my working directory that is not a function. It seems that sapply(ls(),is.function) always returns FALSE, because ls() returns objects of mode character. How do I evaluate is.function(), not on a character string, but on the object that character string represents? Thanks, Tim

Nobody seems to use txfax or does nobody have any problems with it? I have sent mails to most lists and get no reply. I cannot get a fax to go through with txfax. I use a call file as a test and all I get on the receiving fax is a bunch of vertical lines. my call file is: Channel:Srx/gout/4658158 MaxRetries: 0 WaitTime: 20 Application:txfax Data:/etc/asterisk/testfax.tif|caller|debug FYI

Am 05.03.2018 um 13:04 schrieb Nicolas Kovacs <info at microlinux.fr>: > > Le 28/02/2018 ? 22:23, Nicolas Kovacs a ?crit : >> So far, I've only been able to filter HTTP. >> >> Do any of you do transparent HTTPS filtering ? Any suggestions, >> advice, caveats, do's and don'ts ? > > After a week of trial and error, transparent HTTPS filtering

Hello all, I am thinking about a new laptop. I see that there are a number of higher-performance models (incidenatlly, they are also marketed as "gamer" ones) which offer two SATA 2.5" bays and an SD flash card slot. Vendors usually position the two-HDD bay part as either "get lots of capacity with RAID0 over two HDDs, or get some capacity and some performance by mixing one

Aloha! I am new to tinc and I like to figure out my own issues before asking but I am not sure of my next step here. I am not sure if the problem is the VPN configuration or in my network. I will try to be as through as possible. I have two computers that are CentOS with the latest tinc from their respective repositories. Server A is behind a Sophos XG and Server B is behind a Ubiquiti Edge

On 02/15/2018 08:41 PM, Gregory P. Ennis wrote: > It looks like the setup requires the use of software; they have some > packages that are ready made for Ubuntu and Debian, but not RedHat > > https://www.ubnt.com/download/unifi/unifi-ap-ac-pro > > Have any of you tried or succeeded in installation this on Centos 7.4? I have several Ubiquiti UniFi access points (nitpick:

Hi. Forgive me if I am asking questions that have already been answered a million times, but there doesn''t seem to be an easy way to search the wxruby-users archives, so... I tried to install wxruby for the Mac by downloading the latest Mac package installer from rubyforge.org/frs/download.php/1985/wxruby-0.6.0-osx-panther.dmg and tried to run some of the wxruby-0.6.0/samples from the

Hello Tim, Hello samba-people, is there an uptodate guide for authenticating via freeradius somewhere? I have some Ubiquiti APs plus a Cloud Key and I want to authenticate WLAN clients via WPA2-Enterprise instead of a (shared) PSK. It seems like https://wiki.samba.org/index.php/Authenticating_Freeradius_against_Active_Directory is missing some steps (basic setup of freeradius). Can you

Hello, first of all, I'm new to this list, so please beer with me. On the other hand, I'm a graduate computer systems engineer with experience in Linux kernel code, so I can hopefully provide useful input/assistance on this topic. I'm replying because I tried your patches on my setup in the hope they'd fix my lockups. Unfortunately they didn't, so I'm offering debug

Mike Burger wrote: > On 2018-02-16 8:16 am, hw wrote: >> William Warren wrote: >>> I would just buy a cloudkey and not have to bother installing the software >>> onto your machine directly.? If you do not have a power over ethernet >>> switch you'll need a micro USB cable and power supply adapter to run it but >>> after that it takes care of running