similar to: Help: Vultech UPS 1500VA (richcomm_usb)

Hello and welcome! Just recently there was a trip down the memory lane with another device with Richcomm-based hardware, and ultimately nutdrv_qx driver happened to support that one: https://github.com/networkupstools/nut/issues/2395 Some key take-aways were: * try starting the driver with bumped debug verbosity (e.g. from command line, or using a `debug_min` setting with NUT v2.8.0 and

I have a Gentoo linux (OpenRC) desktop connected to a UPS, the brand is Vultech, but lsusb gives me this: Bus 003 Device 006: ID 0925:1234 Lakeview Research and I found an article about this hardware here, someone had it working with the richcomm_usb driver: http://verahill.blogspot.it/2012/12/kstar-australia-1500-va-ups-on-debian.html So, I installed nut and configured my UPS to work with the

Hi, I'm trying to configure my ups with nut which is a locally made one. It uses a rs232 port to talk to the computer and comes with a software called "Powermanager Lite" which is provided by Richcomm and supports Windows, Linux and UNIX. According to the manual it uses the Richcomm circuitry to talk to the computer and uses a drycontact protocol. Unfortunately I couldn't

I have a Cyber Power LE1000DG UPS I got from Best Buy this weekend. I plan to use it with a TrueNAS scale system, and it is connected via USB. Vendor link: https://www.cyberpowersystems.com/product/ups/battery-backup/le1000dg/. TrueNAS has you pick a UPS driver. I could not find any "LE" related models on https://networkupstools.org/stable-hcl.html (which is the list TrueNAS uses). Per

Hi all, i've read a thread about this UPS from Peter van Valderen. He tried to develop a driver for this specific type of UPS. I've downloaded nut-2.2.2 and tried to apply the patches (lakeview.patch & lakeview.v2.patch) but both resulted in rejected chunks. I've tried to ./configure with type lakeview and then a make, but the make command fails. Does anybody has any

I am a complete novice in this area so please bear with me. I have installed nut version 2.6.2-1 for my debian 64bit system. I am trying to implement 'nut' for a new VIX2120 home UPS and have determined that I need the richcomm_usb driver [usb 0925:1234]. But it is not in /lib/nut although referenced in the documentation (driver.list) How do get hold of a copy? Due to ignorance I am not

Greets... ..just bought a cheap UPS today, works in debian 7.0 wrt nut 2.6.4 using richcomm_usb driver... ....output of upsc..... //// root at debian7:~# upsc starpower at localhost device.mfr: Richcomm dry-contact to USB solution device.model: UPS USB MON V1.4 device.serial: unknown device.type: ups driver.name: richcomm_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto

Digitus DN-170014 root at home:/home/scripts# upsc ups device.mfr: Richcomm dry-contact to USB solution device.model: UPS USB MON V1.4 device.serial: unknown device.type: ups driver.name: richcomm_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.6.4 driver.version.internal: 0.04 ups.mfr: Richcomm dry-contact to USB solution ups.model: UPS USB MON V1.4

Hello, I?m running TrueNAS 24.10.2.2, which uses Samba 4.20.5-truenas. I have a mixture of Mac, Linux, and Windows SMB clients in my network that talk to the TrueNAS server over SMB. Apologies in advance for the slightly long-winded setup to my question; I wanted to explain how I got here. I?d like to be able to use Server-Side Copy (SSC) (https://wiki.samba.org/index.php/Server-Side_Copy)

There are two styles of SSC: - the "normal" protocol style called copy-chunk, where the copy is requested in IO ranges by the client and performed server-side - the Apple way enabled by fruit:copyfile where the client requests the *whole* file to be copied in one request to be performed by the server The problem with the latter is that for large file the copy takes some time and

Tripp-Lite SMARTINT2200VS TRUENAS Shell: root at truenas[~]# upsc ups battery.charge: 100 battery.voltage: 54.40 battery.voltage.nominal: 48 device.mfr: Tripp Lite device.model: TRIPP LITE SMARTINT2200S device.type: ups driver.name: tripplite_usb driver.parameter.pollinterval: 10 driver.parameter.port: /dev/uhid0 driver.parameter.synchronous: no driver.version: 2.7.4 driver.version.internal:

I have a Smart-UPS RT 3000 XL connected via serial cable to TrueNAS TrueNAS-9.2.1.2-RELEASE-x64 (002022c) which runs on FreeBSD 9.2-RELEASE-p3. When I start the NUT service, I get the message: Oct 20 01:53:50 truenas notifier: very old or unknown APC model, support will be limited Which I interpret as an indicator of less than optimal operating mode. I suspect that the model identifier is not

Really nice write-up on the Samba-based Open Source project ! https://arstechnica.com/gadgets/2020/07/an-easy-mode-for-zfs-we-test-the-truenas-core-12-0-beta/ Congratulations to the FreeNAS/TrueNAS folks ! Jeremy.

On Fri, 17 Jan 2025 22:32:03 +0100 Carlos Alberto Balseiro Mayi via samba <samba at lists.samba.org> wrote: > ? > HI everyone. > > I've been analyzing a problem with an embedded Linux/FPGA device that > in some cases was failing to run properly when using files from a > samba share. After some time I've found it is related to Samba bug > 12783 and setting

Folks, I'm fairly new to this whole Linux UPS thingie, but I'd quite like to have a look at getting my UPS to work under Linux and would be grateful for any help in getting a driver. I have a reasonable working knowledge of Linux and software development, and thus am happy to modify config files, alter kernel settings, etc, although I'm no C guru. I have a Kebo UPS-650D, which

These are a combination of "temp" and "real" files. The user is deleting/moving PDFs, InDesign and image files. I'm presuming hidden files are also getting deleted when the real files are. The filesystem has been solid (XFS) up until the switch to SMB. From: itdept_head <itdept_head at grown-up.com> To: Cc: "samba at lists.samba.org" <samba at

? HI everyone. I've been analyzing a problem with an embedded Linux/FPGA device that in some cases was failing to run properly when using files from a samba share. After some time I've found it is related to Samba bug 12783 and setting kernel oplocks on global fix the issue. But while looking at that I have found a strange behavior I can't understand. I have guest ok = yes on the

That isn't how rsync should work with -a. Is something preventing it from backdating the file? What is the filesystem? Can you try copying your 2015 file with cp -a? On 10/9/24 14:56, McDowell, Blake wrote: > Hi Kevin, > > The -a flag in this instance is not back-dating the timestamp of the > copied file to the source file. It is modifying it to the time of > transfer

Hi everyone. I'm looking to solve an issue with Samba on a NAS being accessed with TreeSize Pro. Using that program to scan through millions of files is eating up memory on swap and eventually crashing the system. It's scanning mounted CIFS shares on the NAS running TrueNAS with samba version 3.6.9 We have a test case and have been able to replicate the issue on another machine. The

Hi I have a bunch of FreeNAS servers and a TrueNAS HA server all spamming the logs with these messages every minute about their own source name (examples below). These boxes are on two physically separate networks, and I find it unlikely both networks should have some sort of undetected loop. Any ideas on how to debug this? Samba version is 4.1.18. FreeNAS box on network A " Jan 5