similar to: possible zfs bug? lost all pools

Hi all I've very big problem with my nfsd server. I'm running FreeBSD-stable and sometime (one time/week) i've this kind of message on the console : bge0 watchdog timeout problems fxp1 watchdog timeout problems and all my network card is down. Nothing can make the network card work again (only reboot working). There are only one service I need on this server and

So, with the updated HAL, I'm now able to negotiate an IP address via DHCP over the WLAN. Huzzah! But I've got two questions (now that I can use the card): ath(4) doesn't contain a list of media nor mediaopt settings that can be used. Some are detailed down in EXAMPLES, but there's no comprehensive list. (As well, and this is minor, the speeds are explicitly listed for 802.11a

Hi, I've recently installed FreeBSD 6.3, and I've got a problem with synaptics. I've installed it, followed the pkg-message : hw.psm.synaptics_support=1 It works, dmesg gives : psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Synaptics Touchpad, device ID 0 moused_enable="NO" ps shows me that moused doesn't run. xorg.conf : InputDevice

Hi kern.cp_time seems is reporting wrong values (most time too high) with Phenom and amd64 (i386 Ido not know) but with snmpget I get the correct machine values when consulting ssCpuRawUser.0 ssCpuRawNice.0 ssCpuRawSystem.0 ssCpuRawInterrupt.0 ssCpuRawIdle.0 kern.cp_time on RELENG6 reports correct with same hardware -- Jo?o A mensagem foi scaneada pelo sistema de e-mail e pode

I just got the D-Link DWL-G520M PCI wireless card. I'm not interested in super-G or any other post-802.11b feature in particular; the reason I got it was because the marketing materials hinted that (at least some revision of it) had the Atheros chipset. It isn't recognized at all by ath(4) on 5.5. Here is the pciconf -lv section: none0@pci0:14:0: class=0x020000 card=0x3a681186

Hello, recently I've installed 7.0 and now I'm observing strange thing with my Internet connection. Access to some sites may be VERY slow or doesn't work at all with different kinds of timeout messages or without messages at all (but other sites works fine). For example, firefox may say "Transferring data from..." message and then "The connection to the server was reset

Hi, I use samba to share some files between some clients. I would like than these files are always view with -rw-rw-rw- rights by all clients event if someone change file access permissions. Can I configure smb.conf to do that ? Thanks for your help. Stephane

Hi I Have a problem: I'm sharing ~600 folders on my samba server: [SHARE 192.168.0.20] comment = Private share for host 192.168.0.20 browseable = yes writable = yes path = /var/archives/USERS/192.168.0.20 public=yes hosts deny = 192.168. EXCEPT 192.168.0.20 [SHARE 192.168.0.21] comment = Private share for host 192.168.0.21 browseable = yes writable = yes path =

I have a problem with the latest Samba (3.0.25a) running under FreeBSD (recent STABLE: FreeBSD 6.2-STABLE #41: Mon Jun 11 19:24:30 CEST 2007). I run multiple Samba/FreeBSD file servers (in a Windows 2003 domain with Windows 2003 DCs), and everything worked quite nicely until this week. After an upgrade (both Samba and OS), I have a serious problem with access. I am using pam_winbind with

I had the rpool with two sata disks in the miror. Solaris 10 5.10 Generic_141415-08 i86pc i386 i86pc Unfortunately the first disk with grub loader has failed with unrecoverable block write/read errors. Now I have the problem to import rpool after the first disk has failed. So I decided to do: "zpool import -f rpool" only with second disk, but it''s hangs and the system is

Hello all, I have an oi_148a PC with a single root disk, and since recently it fails to boot - hangs after the copyright message whenever I use any of my GRUB menu options. Booting with an oi_148a LiveUSB I had around since installation, I ran some zdb traversals over the rpool and zpool import attempts. The imports fail by running the kernel out of RAM (as recently discussed in the list with

After upgrading my small test system from Debian Etch->Lenny via a complete reinstall, I find my g729 hostid has changed. Same machine, same CPU, same NIC! It doesn't seem reasonable that I have to burn my one "no-hassle" re-registration for a simple OS upgrade. The README only says that hostid is based on MAC addresses of all NICs, but that doesn't seem to be true. Does

Hi, since hostid is stored in the label, "zpool import" failed if the hostid dind''t match. Under certain circonstances (ldom failover) it means you have to manually force the zpool import while booting. With more than 80 LDOMs on a single host it will be great if we could configure the machine back to the old behavior where it didn''t failed, maybe with a /etc/sytem

https://bugzilla.samba.org/show_bug.cgi?id=5867 Summary: rsync with ACLs resets mtime on targets Product: rsync Version: 3.0.4 Platform: x86 OS/Version: FreeBSD Status: NEW Severity: normal Priority: P3 Component: core AssignedTo: wayned@samba.org ReportedBy: samba@byshenk.net

Hey All, I just assembled a new machine. Mother Board: Gigabyte 78LMT-USB3 Processor: AMD FX8350 Memory: Corsair CMZ16GX3M2A1600C10 2x8 GB Video: BFG Tech Nvidia GeForce 9600 GT I tried the 6.6 x86_64 netinstall disk. I tried the 6.6 x86_64 install DVD Both fail at the same place: Anaconda installer init version 13.21.229 starting mounting /proc filesystem... done creating /dev

(From the README) # Jeb Campbell <jebc at c4solutions.net> NOTE: This is last resort if you need your data now. This worked for me, and I hope it works for you. If you have any reservations, please wait for Sun to release something official, and don''t blame me if your data is gone. PS -- This worked for me b/c I didn''t try and replace the log on a running system. My

Dear Experts, Is there a foolproof way of getting hostid on solaris 10 sparc? I am asking this because i have seen Dtrace scripts which allow to change hostid. I want this because i want to tie down my application to specific host and do not want my client to re-use it on other machine just by changing hostid. Thanks, -- This message posted from opensolaris.org

Hi Folks.. I have/had a zpool containing one filesystem. I had to change my hostid and needed to import my pool, (I''ve done his OK in the past). After the import the mount of my filesystem failed. # zpool import homespool cannot mount ''homespool/homes'': mountpoint or dataset is busy The data seems it might still exist, (correct amount of used space is reported),

We have a number of Solaris servers that we run samba shares off of. So far, even using ads for authentication, we have to set up accounts so an entry is in the passwd file for the user. Is there any way to bypass passwd completely and just authenticate via the domain?

Hy List, i try to use a newly installed Samba 3.5.6 in an ADS Domain. firstly i configured kerberos, it works. I can "kinit administrator", "klist", works. secondly i configured samba: smb.conf: --- cut --- workgroup = KINDER netbios name = DSCHUNGEL realm = KINDER.LAN security = ADS wins server = 192.168.120.15 passdb backend = tdbsam load printers =