similar to: Hard(?) lock when reassociating ath with wpa_supplicant on RELENG_7

Hi Sam, do you know if there is anything done about cbb(4)? I have many wireless adapters with ath(4), but only the one based on PCMCIA is making problems on FreeBSD. I cannot boot my notebook with the device inserted into the port, or it will render the system unusable (100% load on cbb(4)). And all I can see is the following: Jul 12 14:58:39 link kernel: ath0: ath_chan_set: unable to reset

I rebuilt my notebook that has the atheros card in it, and forgot to save all of my setup to get it working. I am using dkms and the madwifi rpms from rpmforge. My modprobe.conf has a line: alias wifi0 ath_pci I can ifconfig wifi0 up But the command: /usr/sbin/wpa_supplicant wpa_supplicant -dd -D madwifi -i wifi0 -c /etc/wpa_supplicant/wpa_supplicant.conf fails. Now some of my old

Hi, I am running Centos 4.1 on a Dell D610 with ipw2200. Any good howto for running wpa-psk? I have searched and not found much related to RHEL or CentOS. -- Thanks http://www.911networks.com

So, with the updated HAL, I'm now able to negotiate an IP address via DHCP over the WLAN. Huzzah! But I've got two questions (now that I can use the card): ath(4) doesn't contain a list of media nor mediaopt settings that can be used. Some are detailed down in EXAMPLES, but there's no comprehensive list. (As well, and this is minor, the speeds are explicitly listed for 802.11a

Hi, Yes, that's what I would do. If you want LLVM and the register allocator to also know that the instruction explicitly defines the register, I would designate the register into it's own register class and have your instruction write to that class (and there will be only a single option for RA). cheers, Sam Sam Parker Research Student Electronic Systems Design Group Loughborough

Hi, I'm not sure. But in your lowered DAG the chain nodes are the first operands for you custom nodes, however for the other nodes the chain is the last operand. I seem to remember that during targetlowering the chain is the first operand and then it seems to switch over after ISelDAG, this confused me and may have something to do with the issue that you are seeing. I really don't

Hi Dmitri, If you have such a simple intrinsic which operates on a single register, just lower the intrinsic to a target specific node which is only implemented by a single instruction. Like you were doing before and by using a chain operand. Hard code the instruction to use and define the global register and only pass the instruction the actual variable argument. Hope that helps, Sam Sam

Hi, I am trying to control bandwidths of the connections by using TC with HTB. But I want to implement Leaky Bucket on this structure so as to have a straight flow. Due to being new in this area, could anyone help me how I could do this? Does TC support leaky bucket? Best regards, Fatih Duzova

Hi, I am using netem to add loss and then adding another qdisc within netem according to the wiki. Then i want to change the netem drop probability without having to delete the qdisc and recreate it. I try it but I get invalid argument: thorium-ini hedpe # tc qdisc add dev ath0 root handle 1:0 netem drop 1% thorium-ini hedpe # tc qdisc add dev ath0 parent 1:1 handle 10: xcp capacity 54Mbit

Hi, after some time without FreeBSD I installed 7.1 on an IBM Thinkpad T30 (with ZFS root on encrypted geli, works great). Config is: FreeBSD hasking.alashan.nongo 7.1-STABLE FreeBSD 7.1-STABLE #3: Thu Feb 5 21:10:45 CET 2009 root@hasking.alashan.nongo:/usr/obj/usr/src/sys/HASKING i386 I tried using my ath based D-Link DWL G650, which still seems to have some issues in regard to interrupt

Hi, Question on setting up networking in xen. I want to do the following on my laptop: dom0 is attached to eth0 and ath0. dom1 is going to by my virtual firewall for all my virtual machines. So I assume 3 interfaces, a bridge to eth0, ath0 and a virtual interface? dom2 and so on will route all their traffic through dom1 (through the virtual interface) I''ve read the documentation a

Hi, We have a simple bridge setup but the ping (and other network traffic) does not work reliably. After tracing the code, it looks like a software bug. Since bridge software is been running by thousands of people. I guess I am wrong. Anyway, here is the problem. There are 2 boxes and each one has 2 interfaces, 1 ethernet and 1 wifi. STP is enabled for the bridge to avoid the loop. So the box 1

I have built my own wireless AP with Ubuntu 7.10 and an Atheros-based wireless card. My problem is that I can't access any of the Samba shares with my wireless clients...they can all search for the server, get prompted for a login then it just hangs and eventually times out. The same clients, when using their LAN ports to connect to the same server, are able to do everything--browse and

Three different external hard drives (Seagate, Western Digital and noname USB 3.0 enclosure) refused to be recognized as the umass devices. Reverting /usr/src/sys/dev/bsd/controller to r248085, building and loading just xhci module makes drives appear again. Below are snippets from the log in both cases: Non working: Jul 4 14:35:17 twinhead kernel: xhci0: <XHCI (generic) USB 3.0

NetworkManager used to work fine for me but during the last few installations its a big hurdle in the wireless connectivity. I'm using Madwifi and its interface is correctly listed and working but I cannot connect to any wifi AP without NetworkManager. I've two interfaces: eth0 and wifi0. Starting NetworkManager doesn't show any notification icon in the top right in gnome and I believe

Hi Rahul, If you're certain that your problem isn't as Stephen suggested, you might want to have a look at this: --- (From http://ebtables.sourceforge.net/brnf-faq.html <http://ebtables.sourceforge.net/brnf-faq.html> ) How do I let vlan-tagged traffic go through a vlan bridge port and the other traffic through a non-vlan bridge port? Suppose eth0 and eth0.15 are ports of br0.

Recently ran into a problem with the 2.6.18 kernel on Xscale arch when a br= idge, with multiple interfaces on it, is configured with a redundant loop. = All interfaces are left on forwarding and nexer switch to block when the lo= op is introduced. This was tested against a 2.6.16 kernel and the problem d= id not occur, interfaces forwared and blocked correctly. Any help would be = appreciated.

Hi Tom and other gurus, I modified SHOREWALL (version 2.0.15) for bridging and I cannot restart it. I got the following error ... Processing /etc/shorewall/policy... Policy ACCEPT for fw to net using chain fw2net Policy REJECT for fw to loc using chain all2all Policy DROP for net to fw using chain net2all Policy ACCEPT for loc to fw using chain loc2fw Policy ACCEPT for loc to net

Hello, I bought a LevelOne WPC-0301 11g Wireless CardBus Adapter today. According to the box it is "v6". The ral(4) man- page mentions only v2, but that one is ancient and can't be bought anymore. So, enabling the debug sysctl gives this in dmesg: cardbus0: Expecting link target, got 0x0 cardbus0: <network, ethernet> at device 0.0 (no driver attached) cardbus0: CIS pointer

G'day ... David Schultz, in his spare time, has been working through some of the issues I've been able to 'tweak' in the unionfs code ... as he is currently working on forward-patching it to -CURRENT right now, he can't commit the code to the -STABLE tree ... in order to allow others using unionfs to test the patch (I've been running it a few weeks now on a very heavily