similar to: Short SMART check causes disk op timeouts

I upgraded from 6.2 to 6.3 p5 last night. Upon rebooting, the second disk in the mirror is missing. # atacontrol status ar0 ar0: ATA RAID1 status: DEGRADED subdisks: 0 ad0 ONLINE 1 ---- MISSING # grep ata /var/run/dmesg.boot ad0: 238475MB <WDC WD2500AVJB-63UDA0 00.02C01> at ata0-master UDMA100 ad1: 238475MB <WDC WD2500AVJB-63UDA0 00.02C01> at ata0-slave UDMA100 ar0: disk0

On Tue, Oct 14, 2008 at 09:52:09PM -0400, John R. Huston wrote: > Hi, I am not very familiar with using mailing lists so if I have made > a mistake in the format or scope of the message please correct me. I > am pretty desperate for an answer by now so any help at all is really > very appreciated. > > I have a Shuttle SD30G2 computer (Specs: >

Rarely, a geli partition I have freezes a process in bufwait state. It occurs after an ATA timeout message: Aug 5 03:47:13 thor kernel: ad10: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=219028637 The geli partition resides on an Intel MatrixRAID RAID1 mirror using the ICH9R chipset (Asus P5K-E/WIFI). Killing (even -9) the process does not work. Rebooting is the only solution, yet the

Hi, Recently I've decided to play with gjournal. Main reason was a promise of avoiding full fsck check after unclean shutdown. I've successfuly configured gjournal on existing filesystems (all UFS). And then it happened - my system had a power failure. After boot, it forced me to run fsck manualy. Nothing special, I did it before... But this time it failed on gjournaled disks.

Sep 21 08:57:54 belle fsck: /dev/ad4s1d: 1 DUP I=190 Sep 21 08:57:54 belle fsck: /dev/ad4s1d: UNEXPECTED SOFT UPDATE INCONSISTENCY; RUN fsck MANUALLY. Ok, so I ran fsck manually (even with -y), but yet it refuses to clear/fix whatever to the questions posed as fsck runs. What does this all mean? Thanks, -Clint -- This message has been scanned for viruses and dangerous content by MailScanner,

I am attempting to install 7.1-BETA2 (from CD) onto a PC with a Promise SX4060 RAID controller and two Seagate 120GB ATA disk drives. The boot from CD keeps repeating the following (error) messages: (I'm retyping here) ============================================================================ ================== ad4: WARNING - SETFEATURES SET TRANSFER MODE task queue timeout - completing

Any progress here? Does anyone know if this will be fixed in 7.1 latest, or should we start looking for different backup solution (in this case I would suggest to remove dump from the source tree - having a backup tool that doesn't work is worse than having none). After upgrading we basically cannot backup our servers. Shouldn't this issue be on

Overnight I was running a zfs send | zfs receive (both within the same system / zpool). The system ran out of space, a drive went off line, and the system is degraded. This is a raidz2 array running on FreeBSD 8.1-STABLE #0: Sat Sep 18 23:43:48 EDT 2010. The following logs are also available at http://www.langille.org/tmp/zfs-space.txt <- no line wrapping This is what was running: #

Greetings I am having trouble with suspend/resume on my Thinkpad X31, running 7.0-STABLE as of April 23. Any help would be appreciated. First problem: When I run "acpiconf -s3" from mulituser mode, the system suspends immediately, without executing /etc/rc.suspend (which has mode 755); then on resume, I get a panic. Second problem: When the system panics, I don't get a dump (or

Hi If I have the wrong list please feel free to redirect me. I'm running 7.0-RELEASE-p4 and trying to backup to an external USB drive. I'm using the following command dump -a0Lf /backup/diskimages/root /dev/mfid0s1a Where df: Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/mfid0s1a 507630 208436 258584 45% / /dev/da1s1d 709513458

Hi, Is there a way to make use of hardware monitoring on Intel 945GCLF (with Atom 230 cpu)? It is relatively new child of Intel, but maybe someone figured it out yet. pciconf -lv shows this: ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x464c8086 chip=0x27da8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) SMBus

Hi! I fully understand and second efforts on educating people how to configure BIND to be stong to attacks and keep them from using "query-source address" with "port" option but how about binding named to particular IP address when host has many of them? Using "query-source address" without "port" is the only solution (not speaking of jails here) and safe

I am having problems with silent data corruption on (some) drives connected to an MCP55 SATA controller. I have two servers, both running RELENG_7_0/amd64. One has the 570 Ultra chipset, the other has 570 SLI. Both chipsets have the MCP55 SATA controller. The server with 570 Ultra chipset has a bunch of older 250GB SATA-150 drives hooked up to the MCP55 controller and it is working just fine.

Hello All, I mentioned a problem with this once before, and was referred to other threads that also talked about this. But I believe a recent problem I was experiencing, may have been related to this: [: -le: argument expected. So I'd like to bring it up again, in hopes that someone might have a cure. Specifically, two printf()'s are sent to the same line, which results in a /very/ hard

(Please keep me CC'd as I'm not subscribed to the list) I'd like to request that folks running RELENG_8 (and RELENG_9, though I do not use it) please check the behaviour of their terminal after each of following commands are run (check terminal after each command): top -a (press "q" after 1 screen refresh) top -b If you find that your input characters in your shell

Hello Got strange problem with high system "%system load" and very slow user level programs (apache+php+mysql) behavior gstat shows 1.5-4% hard disk busy load but system shows about 20-30% load while user load is max 5%. vmstat shows from 2 to 35 process in "b" state. Now use 7.0-RELEASE-p5 , but the same problem was with 7.0-RELEASE. And have no idea what to do with this.

Hi, Whilst doing some QA work on XORP on my desktop, which has fxp0 and msk0, fxp0 got totally hosed. I was running PIM-SM and IGMPv2 router-mode on the box at the time. I wonder if this is related to the problems with fxp multicast transmission I saw back in April. I'm a bit concerned about this as fxp is still a very widespread and useful network chip. I am running

Hi, could anyone give recommendations (or share experience) regarding using ZFS: - FreeBSD 7-Stable (amd64 with 8GB RAM) + special tuning necessary (apart from increasing kernel memory to 1 or more GB for ZFS) - Samba 3.2 + ACLs possible directly under ZFS? + recommended compile options? - NFS - email (imap) - jails (I have seen some problems exist with using snaphots within

Colleagues, 3 of 4 times this machine failed to boot, panicing somewhere in late kernel initialization phase (before /sbin/init is executed) I have serial console and KDB enabled, so can do experiments. Last two crashes: Fatal trap 12: page fault while in kernel mode fault virtual address = 0x8 fault code = supervisor read data, page not present instruction pointer =

Hey folks, So what's the word on AHCI and bios drive geometry? I'm having a real pain of a time trying to get some 750gb sata drives running on my FreeBSD7 box in AHCI mode. It doesn't seem to matter what disk geometry I suggest to sysinstall, something complains of an invalid disk upon booting it. Actually, in AHCI mode the bios screen doesn't report any information on