similar to: Interrupt routing issues in FreeBSD 7.1-BETA2

I've tested both 6.3 and 7.0-RC2, amd64 architecture, and have found the occurrence of an interrupt storm using an ASUS A8N-SLI Premium (nForce 4) motherboard with an AMD Opteron 175. Relevant dmesg output: atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA

[CCing the libguestfs mailing list - as Rich responded on IRC about your question on timeout.] On Sun, Feb 21, 2016 at 10:07 PM, Thomas Kee <xsited@yahoo.com> wrote: > Hi Kashyap, > > Thanks for offering to help. The day job caused a pause and it took me an > hour to reassert where I was in the process. I usually hang out on freenet > as xsited. I am still reading the

Samba mount (from one of our build scripts). We decided to upgrade to RedHat 7.2 (which uses a newer version of Samba -- 2.1.1b IIRC), maybe that fixes the problem. However, I decided to submit this bug report, in the hope that it may help kill some bugs. (Remember -- the only good bug, is a dead bug :)) So, here is the dmesg output: Linux version 2.2.16-22enterprise

Hi all, I have had this problem since day 1 on my new server. It has run since November 15th 2008, and serve approx. 10 GB worth of web traffic per month for the main site and then some 40 domains with mail and small web pages. (hence - it's NOT that busy yet) I started with 7.1-RELEASE-pX since I didn't have problems straight off - but it didn't last long. After a few days of

Hello, I have a server pfsense in bridge mode to function as transparent FW, the problem is that once I connect the pfsense between my router core and my core switch catalyst a few seconds begin to appear several messages like these: em2: watchdog timeout - resetting em2: watchdog timeout - resetting em2: watchdog timeout - resetting em2: watchdog timeout - resetting And the connection falls

Hi, I have a Dell T710 with 4 X 10G ethernet interfaces (2 X Dual port Intel 82599 cards). It is running FreeBSD RELENG_8 last updated on July 13. What I see is packet loss (0 - 40%) on IPv6 packets in vlans, when the machine is not the originator of the packets. Let me try to describe a little more. If a neigbouring machine ping6 it, there will be packet loss. If it act as a router for ipv6,

Hi, I noticed that network connection of one of my boxes got significantly slow just after upgrading it to 8.0R. The box has an em0 (82547EI) and worked fine with 7.2R. The symptoms are: - A ping to a host on the same LAN takes 990ms RTT, it reduces gradually to around 1ms, and then it returns to around 1s. The rate was about 2ms/ping. - The response is quite slow, but no packet

Hi, I have been trying to figure out why my Supermicro X7DWA-N with dual Xeon E5420''s locks up occasionally when running Xen, I''ve tried 3.2.1 and 3.3 with the Xensource 2.6.18 kernel, with gentoo 2.6.21, and 2.6.25 and 2.6.27 kernels patched with suse xen patches, every single combination suffers from occasional lockups :(, I am reasonably confident that the hardware is ok

Hi All, I have a machine with three network cards, and the third card(named e1000g2) is in use now. I want to use e1000g2 as default NIC when I create Guest. How can I change the default NIC? I can override the default value of config/default-nic property of svc:/system/xvm/xend. But xend still use e1000g0 when creating Guest. BTW, I can explicitly set "bridge=e1000g2" when creating

Hi all I've very big problem with my nfsd server. I'm running FreeBSD-stable and sometime (one time/week) i've this kind of message on the console : bge0 watchdog timeout problems fxp1 watchdog timeout problems and all my network card is down. Nothing can make the network card work again (only reboot working). There are only one service I need on this server and

We (a small college with about 3000 active accounts) are currently in the process of moving from UW IMAP running on linux to dovecot running on a cluster of 3 or 4 new faster Linux machines. (Initially using perdition to split the load.) As we are building and designing the system, I'm attempting to take (or find) benchmarks everywhere I can in order to make informed decisions and so

On Sun, Oct 29, 2017 at 11:51:55PM +0100, Fengguang Wu wrote: >Hi Linus, > >Up to now we see the below boot error/warnings when testing v4.14-rc6. > >They hit the RC release mainly due to various imperfections in 0day's >auto bisection. So I manually list them here and CC the likely easy to >debug ones to the corresponding maintainers in the followup emails. >

On Sun, Oct 29, 2017 at 11:51:55PM +0100, Fengguang Wu wrote: >Hi Linus, > >Up to now we see the below boot error/warnings when testing v4.14-rc6. > >They hit the RC release mainly due to various imperfections in 0day's >auto bisection. So I manually list them here and CC the likely easy to >debug ones to the corresponding maintainers in the followup emails. >

I tried to install and boot a 2.6.7 Dom0 xenLinux Kernel on an SMP (Dual-Xeon) Machine with 2 3-ware Controllers installed (1 4-channel Controler and 1 8-channel Controler, both Parallel ATA) and no other HDs present (except the ones connected to the 3ware controlers, of course). First of all I got a compilation error after activating the SMP option in the kernel config. After deactivating the

Dear best guys, I really love 5.3 in many ways but here're some unbelievable transfer rates, after I went out and bought a pair of Intel GigaBit Ethernet Cards to solve my performance problem (*laugh*): (In short, see *** below) Tests were done with two Intel GigaBit Ethernet cards (82547EI, 32bit PCI Desktop adapter MT) connected directly without a switch/hub and "device