similar to: Freebsd 7 STABLE 200807 amd64 - Realtek 8168 not working

I'm running 7.0-RELEASE-i386 on Jetway's NC92-N230 mainboard. The board has one integrated RTL8168/8111 gigabit NIC as well as an expansion board with three RTL8168/8111 NICs. Why would the three NICs work while the onboard NIC does not? none2@pci0:1:0:0: class=0x020000 card=0x816810ec chip=0x816810ec rev=0x02 hdr=0x00 vendor = 'Realtek Semiconductor' device

Hello, I need some advice how to debug this issue ... Recently I got a new mainboard for a router, it's a Gigabyte GA-H77N-WIFI with two onboard re(4) NICs. The problem is that re0 works fine and re1 doesn't: It doesn't receive any packets. Tcpdump displays all outgoing packets, but no incoming ones on re1. Ifconfig shows the link correctly (100 or 1000 Mbit, depending on where I

Hello list I have a shutdown problem. I have a machine with gigabyte GA-G33M-DS2R motherboard. Integrated network card is Realtek 8111B. I can not wake the computer after I shutdown it from FreeBSD. It is a dualboot system - windows xp and freebsd. If I shutdown the computer from windows - later I can wake it up with magic packet. Even if i shutdown the machine on the boot menu with the power

Hello! Is anybody having stability problems with if_re under FreeBSD 6.3-stable? I know about PR kern/118719[1] but it doesn't look like the problem I'm having - at least my machine doesn't panic. My machine[2] runs FreeBSD 6.3-stable / amd64: root@kg-vm# uname -a FreeBSD kg-vm.kg4.no 6.3-STABLE FreeBSD 6.3-STABLE #1: Sun Jan 27 02:10:15 CET 2008

Hi list, Are there any problems with the if_re ? After upgrade RELENG_7 on my laptop NIC stopped to work:( uname -a: FreeBSD notebook.minsk.domain 7.2-PRERELEASE FreeBSD 7.2-PRERELEASE #3: Fri Apr 10 20:38:55 EEST 2009 root@notebook.minsk.domain:/usr/obj/usr/src/sys/tiger-asus-a6m i386 notebook# dhclient re0 DHCPDISCOVER on re0 to 255.255.255.255 port 67 interval 3 DHCPDISCOVER on re0 to

Thanks for you reply. I have installed asciidoc with "pkg_add asciidoc" And it returns something: # asciidoc fgh asciidoc: FAILED: input file /root/nut/fgh missing # which asciidoc /usr/local/bin/asciidoc Maybe there is any way to skip building man pages. This is not the such main thing as a new devices support. I also could built the driver that I need # make riello_ser but I don't

Str is a pretty ugly regexp module. Let's try to replace it with PCRE. This series of commits goes some small way towards that eventual goal. - - - I wonder if there was a deep reason why we had this? let unix2dos s = String.concat "\r\n" (Str.split_delim (Str.regexp_string "\n") s) I replaced it with what I think should be (nearly) equivalent: let unix2dos s =

Hello. I'm in need of some help to shed some light on a strange problem. The box is running Samba 4.1.7 on FreeBSD 9.2/amd64 and I suspect (though I'm not sure) all troubles started after the upgrade from 4.1.6. The setup is quite simple: no AD, no LDAP, only one server. A command as simple as "smbclient -U user //SERVER/SHARE", if fired up several times in a row on the

Here is what I did: # cd /root/nut/ # nut here it's checkouted repository # ./configure --with-user=_ups --with-group=_ups # cd drivers/ # make riello_ser # chgrp bin riello_ser # cp riello_ser /usr/local/bin # here I copied builder driver to folder where nut-package will store their files/drivers # pkg_add nut-2.6.5p1 # ls -la /dev/tty00 crw-rw---- 1 _ups _ups 8, 0 Jul 30

Hi, I upgraded my 7.1-RELEASE system to RELENG_7 yesterday and after booting, re0 works for only a short time, then gives "re0: PHY read failed" over and over. Does anyone have a suggestion on how to debug? Thanks, Steve

Dear colleagues, experimenting with new amd64-based router we found strange re(4) behaviour when working in autoselect media mode: whenever promisc mode turned on, renegotiating occurs, leading to 3 to 45 (depending on STP settings on the switch) network unavailability. Moreover, some other re(4) setting changes seem to disturb link state unneededly (such as ifconfig re0 -vlanhwtag) The most

v1: https://www.redhat.com/archives/libguestfs/2017-September/msg00135.html v2: https://www.redhat.com/archives/libguestfs/2017-September/msg00158.html v3 is almost identical to v2, but I have added 4 extra commits to almost finish the job of replacing Str everywhere possible (note it's not possible to replace Str in common/mlstdutils or the generator because those are pure OCaml). As

v1 was here: https://www.redhat.com/archives/libguestfs/2017-September/msg00135.html This is a more complete evolution of the earlier patch. It replaces most important uses of Str with PCRE throughout the code. It also extends the bindings with some useful features like case-insensitive regexps. The main places I *didn't* touch are the generator (GObject uses Str extensively); and

Hi, After updating from 7.0-RELEASE to STABLE (around 15/08) my NIC refuses to handle large file transfers. pciconf -lv re0@pci0:4:0:0: class=0x020000 card=0x001a6409 chip=0x816910ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8110SB Single-Chip Gigabit LOM Ethernet Controller' class = network subclass = ethernet Log

Hi all I've very big problem with my nfsd server. I'm running FreeBSD-stable and sometime (one time/week) i've this kind of message on the console : bge0 watchdog timeout problems fxp1 watchdog timeout problems and all my network card is down. Nothing can make the network card work again (only reboot working). There are only one service I need on this server and

I had 7.0 installed and did a binary upgrade to 7.1RC2 everything seems okay until I went to check my mailq and got : Segmentation fault (core dumped) I am running Postfix as my mail server and it does not seem to be affected. I can't even run sendmail as I get the same error. ------------------ Peter Sprokkelenburg mailto:peters@netreconsys.com

Just thought I'd pass along that I have successfully installed FreeBSD 7.0 into a Xen 3.1 HVM. ?This one went as smooth as I expected, considering my experience with 6.3. ?Haven't done any benchmarking or stress testing or port installs or anything. ?But so far it's working nicely. Here's all the info. ?If you'd like to see anything else, let me know. Host hardware: ?

Dear R-users, I would like to fit a glmm with cross-classified random effects with the function MCMCglmm. Something along the lines: model1<-MCMCglmm(response~pred1, random=~re1+re2, data=data) where re1 and re2 should be crossed random effects. I was wondering whether you could tell me specifying cross-classified random effects in MCMCglmm requires a particular syntax? Are there any

Dear all I have a model that looks like this: m1 <- lmer(Difference ~ 1+ (1|Examiner) + (1|Item), data=englisho.data) I know it is not possible to estimate random effects but one can obtain BLUPs of the conditional modes with re1 <- ranef(m1, postVar=T) And then dotplot(re1) for the examiner and item levels gives me a nice prediction interval. But I would like to have the prediction

Hi all: I get the following error message that I am not able to resolve. Error in if (const(t, min(1e-08, mean(t)/1e+06))) { : missing value where TRUE/FALSE needed It appears right before the last data.frame statement. Below is the program that simulates data from one way random effects model and then computes normality and bootstrap confidence interval for