similar to: Pygrub problem

Package: xen-utils-3.2-1 Version: 3.2.1-2 Severity: normal When my domU uses this configuration: --- root = '/dev/sda2 ro' disk = [ 'phy:/dev/volume0/lenny.vandervlis.nl-swap,sda1,w', 'phy:/dev/volume0/lenny.vandervlis.nl-disk,sda2,w', ] --- Pygrub gives the error "Error: Boot loader didn't return

Package: xen-utils-4.0 Version: 4.0.1-2 Severity: normal File: pygrub pygrub error when trying to run a image created by xen-create-image with partitions option. ---------------------------------------------------------------------------------------------------------------------------------------- [2011-10-02 21:36:08 1512] DEBUG (XendDomainInfo:101) XendDomainInfo.create(['vm',

Hello I''m trying to convert a HVM to PV dom0. The domU is a 10SP2 SLED ( Kernel 2.6.16.60-0.21 i386) and is a SLES11SP2 dom0 (Kernel 3.0.13-0.27-xen 64bit). The truth is that every tutorial I see it differently and I do not know where this error. When I start the domU, pvgrub shows the options but when I select the kenel-xen, returns the error "Boot loader did not return any

Package: xen-hypervisor-4.1-amd64 Version: 4.1.1-3 Severity: important Whenever I try to start a domU, xm create failed for 'Boot loader didn't return any data!'. % sudo xm create -c squeeze.cfg Using config file "/etc/xen/squeeze.cfg". Error: Boot loader didn't return any data! It seems related to the following error in dmesg [1440.163935] pygrub[3654] trap invalid

Hi all, after upgrading from xen 3.0 to xen 3.2 I cannot start my domUs: I get: VmError: Boot loader didn''t return any data! Suggestions? This is the log [2008-06-25 11:24:53 2755] DEBUG (XendDomainInfo:84) XendDomainInfo.create([''vm'', [''name'', ''engtest3.infolan''], [''memory'', ''2048''],

Hardware: 2x Intel Xeon Quad-Core 2.33GHz 24GB FBDIMM RAM 2x 2TB HDD in RAID-1 Intel Server Board S5400SF Setup: Arch Linux x86_64 Xen 4.1.2 Grub2 Multiboot Synopsis: I set up a new VM for Debian Squeeze following instructions here: http://www.howtoforge.com/installing-debian-squeeze-6.0-domu-on-centos-5.5-x86_64-dom0. Partitioning & installation completed correctly. When I tried to run the

Package: xen-utils-4.0 Version: 4.0.1-2 If you reboot with the DomU disk DRBD domain destroy. pygrub error when trying to run a image on DRBD device My config DomU ------------------------------------------------------ bootloader = '/usr/lib/xen-default/bin/pygrub' vcpus = '1' memory = '256' cpus="8-15" root = '/dev/xvda2 ro' #disk

Hi I have configured few VMs with RHEL5,32 bit, but some VMs after successful stop/restart few times, suddenly they start giving following error from "xm create vm1.cfg" startup. ---- Error: (''c618d493-a696-7637-333d-bd891fa41ac2'', ''VM_metrics'') ---- If i replace system.img, they starts working again. This is what i see in xend.log file. This happens

Hi, I''m trying to install a FC 16 PV guest. After installation the guest doesn''t load with: Error: Boot loader didn''t return any data! xend.log: [2011-11-14 18:57:32 32321] ERROR (XendBootloader:214) Boot loader didn''t return any data! [2011-11-14 18:57:32 32321] ERROR (XendDomainInfo:483) VM start failed Traceback (most recent call last): File

I''m newbie Xen-4.1.1 I''m trying to boot DomU with the following configuration. Sometime DomU boot, but sometime boot failed I''m not sure what is the problem. I can attach that image with tap-ctl on Dom0. Does anybody advice me about this problem?? Sincerely * Environment OS : Scientific Linux 6.1 x86_64 Kernel : 2.6.32.43

Yesterday, I had a PV OpenSolaris DomU stop responding. I looked on my xen machine and it was in a paused state. I ended up destroying it and then doing xm create to bring it back up. It won''t boot, and I think PyGrub is hanging. Not sure how to resolve this, there aren''t any errors being presented in xen/xm itself. If I try ''xm create config.conf'' it just

Hello, I cannot call my server over the internet with SIP anymore. Even when I do a maximum logging on my firewall, I don't see packets coming from outside. I've tried it from an ekiga.net account and an sip2sip.info account. What could be wrong? I would expect incoming traffic on port 5060 UDP... The account is "paul at vandervlis.nl". This should connect trought DNS to the

Hello, I have 2 Dell 1955 blade servers, running RHEL5-Xen. I''m testing the migrate functionality from one blade to another. I can start the domain, move it to one blade (minor delay/packet loss) and everything is fine. When I try to move it back to the original blade the migration fails and the DomU crashes c1b1 = Blade 1 (192.168.131.201) c1b2 = Blade 2

Hello, yesterday a coworker had to reboot one VM, the Vm did shutdown but never came back up. We are USing CentOS 5.1 and XEN xen-3.0-x86_64. What can be the reason of this behavior? Here ist the part of the logfile: [2008-07-02 15:04:18 xend.XendDomainInfo 31150] INFO (XendDomainInfo:947) Domain has shutdown: name=auto-input-vm1 id=26 reason=reboot. [2008-07-02 15:04:18 xend.XendDomainInfo

Hi -- I''m getting this error even though I have correct DVD ISO image for snv_92. bash-3.2# uname -a SunOS stoakly2 5.11 snv_92 i86pc i386 i86xpv bash-3.2# xm create snv.py Using config file "./snv.py". Error: (2, ''Invalid kernel'', ''elf_xen_note_check: ERROR: Will only load images built for the generic loader or Linux images'') bash-3.2#

Hi, how can I install a openSuSE 10.3 PV-guest on a LVM-drive of a openSuSE 10.3 host with Xen 3.10? On 10.2 with Xen 3.0.3 the openSuSE-YaST-module for managing VMs could install the system also on block-devices, unfortunately this is not possible anymore with OSS 10.3 :-( What I have tried: - I created two LVM-partitions, one for "/" one for swap. - Installing an OSS 10.2 PV-guest

Note: I could simply direct boot the appropriate kernel/initrd to get the alpha1 installation going as always done in the past, but I think this should work. The Debian alpha 1 installer page says it should. Details $ sudo xm create -c wheezytest.cfg Using config file "./wheezytest.cfg". Error: Boot loader didn''t return any data! direct pygrub test run: # pygrub

Hi, I try to start a DomU with xm create endian -c and got the following error message Xend has probably crashed! Invalid or missing HTTP status code. I''ve tested the DomU with nearly the same system at VMWare (Windows) and it works normaly, but on my server I get this error message. I useing gentoo as Dom0. I tried also a gentoo DomU with the same result. Thanks.

Hi Keir, Attached patch gets rid of the global attr variable and adds support for NetBSD. Signed-off-by: Christoph Egger <Christoph.Egger@amd.com> -- AMD Saxony, Dresden, Germany Operating System Research Center Legal Information: AMD Saxony Limited Liability Company & Co. KG Sitz (Geschäftsanschrift): Wilschdorfer Landstr. 101, 01109 Dresden, Deutschland Registergericht

Hi guys I have few problems with live migration ... and I need some professional help :) I have 2 xen servers ... CentOS 5.3 and I want to have a high available cluster Now let`s begin .... xen0: [root@xen0 ~]# fdisk -l Disk /dev/sda: 218.2 GB, 218238025728 bytes 255 heads, 63 sectors/track, 26532 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start