similar to: driver.parameter.offdelay vs ups.delay.shutdown / driver.parameter.ondelay vs ups.delay.start

Hi, My Cyber Power reports these two values. Each pair has the same value. Would they normally be the same thing? Thanks Alan

Thanks Charles for the clarification. If NUT cannot control it then removing it would, IMO add value. On Sun, 10 Mar 2024 at 00:14, Charles Lepple < clepple_at_gmail.com_chribonn at duck.com> wrote: > On Mar 9, 2024, at 5:16?PM, chribonn at duck.com wrote: > > > > The posting at > https://github.com/networkupstools/nut/issues/432#issuecomment-405371395 > references

Very good point. I hope to write a beginners guide -- more like adopting my notes --on NUT. I could summarise your point that technically one should only override settings that NUT can act upon (like those settings that control Low Battery or, as stated in the documentation if the reported value is known to be incorrect. Overriding a variable that is out of scope for NUT (as with

Hello there. Have been experimenting with an APC Smart-UPS 1500 RM and would like to share the results of my research. I hope this could be of help to people having this kind of units. I would also like to give something back to the NUT community. :) Here are the details of the unit in question (a 1500 VA rack mountable one): Model: Smart-UPS 1500 RM Firmware revision: 617.3.I USB firmware

Are there plans to change the default offdelay/ondelay for the Windows versions of NUT since it can't be invoked at the end of shutdown? E.g. I have a Win2k3 server that takes just over 4min to shut down, so I set my offdelay to 600 (ondelay is +15 that) to be extra safe. Maybe a 2 min by default would be good? Most (all?) APC non-smart UPS's are hard-coded at an annoying 1min delay,

I've had this a long time but haven't submitted it yet. I've tried to mirror the ia32 setup, so there should be a new subdirectory src/libFLAC/ppc . The first two attachments go there. The third is a context diff for src/libFLAC/Makefile.am . I have some more modified files, which I figured I'd submit after the above are checked in and working for somebody other than me. If you

Welcome, Acctualy, I'm try to poweroff my ESXi (6.7). Virtual machine with Ubuntu and redirected USB port with APC Back UPS CS 650, have nut-server and send info to ESXi. When battery is low, ESXi poweroff gracefully all VM and same ESX go down. This work fine and don't have any problem. But important to me, is set to more offdelay on UPS than the default 60 sec. (cut off power socket

On Fri, 2 Feb 2018, nut.user.u830 at neverbox.com wrote: > I have an older box set up this way for continuous integration, and it needs to see more than a few seconds of power loss for the "always turn > on" BIOS setting to work. I forget how many different intervals I tried, but 30 seconds of off time is reliable for that particular box. > > Thanks. This

Dear All, I am running Slackware64-14.1(Linux marto 3.10.17 #1 SMP Fri Feb 14 16:39:21 CST 2014 x86_64 Intel(R) Pentium(R) CPU G3250 @ 3.20GHz GenuineIntel GNU/Linux) with kernel 3.10.17 and nut package nut-2.6.5-x86_64-1_SBo, buit from source using the build script http://slackbuilds.org/repository/14.1/system/nut/ In the README.Slackware it is suggested that the commands for killing the

Hi, I have the Eaton 5E850iUSBDIN UPS connected via USB to a Raspberry Pi 3B+. It seems that everything but the ondelay parameter works so far. when I test the setup with this command: upsmon -c fsd The NUT server makes the NUT clients shut down properly and the Raspberry Pi running the NUT server shuts down correctly too. The problem is that after UPS shuts down, it immediatelly brings the

On Jan 21, 2015, at 9:15 AM, Sebastian Hosche <sebastian.hosche at web.de> wrote: > Hi there, > > I just purchased a CyberPower BR850ELCD and while setting NUT up with the install instructions from the homepage was pretty straightforward, and the UPS was detected by the usbhid-ups driver, I'm having problems getting the UPS to work properly. > > First issue: whatever I

On Aug 21, 2018, at 1:37 PM, Karol Olszewski <karol.olszewski at ipflow.pl> wrote: > > I'm send debug file /lib/nut/usbhid-ups -a apc -DDD in attachement. > I tested two different ones APC BackUPS CS 650 and on both problem occurred. > I borrowed PowerWalker (driver blazer_usb), and all function + offdelay, > ondelay works perfectly. unfortunately, it looks like there

W dniu 24.08.2018 o 23:13, Karol Olszewski pisze: > Hi > I'm bit closer :) > Acctually change "UPS.Output.APCDelayBeforeReboot" to > >   { "shutdown.return", 0, 0, "UPS.Output.APCShutdownAfterDelay", NULL, > "90", HU_TYPE_CMD, NULL }, > > Now, UPS turn off load after 90 sec, but not power ON when power is back > Dear nut

Hi there, I just purchased a CyberPower BR850ELCD and while setting NUT up with the install instructions from the homepage was pretty straightforward, and the UPS was detected by the usbhid-ups driver, I'm having problems getting the UPS to work properly. First issue: whatever I set as the offdelay, seems to be ignored and the UPS just cuts the power about 2sec after receiving the

W dniu 23.08.2018 o 02:16, Charles Lepple pisze: > > For some reason, this is being hardcoded to 1: > > drivers/apc-hid.c- /* used by APC BackUPS CS */ > drivers/apc-hid.c: { "shutdown.return", 0, 0, "UPS.Output.APCDelayBeforeReboot", NULL, "1", HU_TYPE_CMD, NULL }, > > Can you rebuild the NUT drivers as described here?

W dniu 24.08.2018 o 13:10, Charles Lepple pisze: > Sorry, I didn't mean to imply that the master branch was necessarily going to be different, just wanted to make sure you had everything set up to recompile. The real test is to see if things change after commenting out that line (such as by changing it to start with "//"): > > // { "shutdown.return", 0, 0,

Hi Charles, Thanks so much for your quick and detailed reply! I've added my answers and details inline. On 22.1.2015 04:46, Charles Lepple wrote: > On Jan 21, 2015, at 9:15 AM, Sebastian Hosche <sebastian.hosche at web.de> > wrote: > >> First issue: whatever I set as the offdelay, seems to be ignored and >> the UPS just cuts the power about 2sec after receiving

W dniu 22.08.2018 o 14:41, Charles Lepple pisze: > /lib/nut/usbhid-ups -a apc -DDD -k Please see attachement. -- Karol Olszewski ipflow.pl -------------- next part -------------- A non-text attachment was scrubbed... Name: APC_BackUPS_CS_650_fsd.log.gz Type: application/gzip Size: 5735 bytes Desc: not available URL:

Thanks for help! Are you happy with your Eaton Elipse ECO 1600? Does it work well with ondelay? I will need some UPS that supports the ondelay parameter. Bartosz śr., 10 kwi 2019 o 13:06 Roger Price <roger at rogerprice.org> napisał(a): > On Wed, 10 Apr 2019, Bartosz wrote: > > > I don't see ups.delay.start anywhere. Here is the output of upsrw: > > > > upsrw

BTW, does it have passive cooling? Bartosz śr., 10 kwi 2019 o 16:53 Bartosz <bartoszmail at gmail.com> napisał(a): > Thanks for help! > Are you happy with your Eaton Elipse ECO 1600? > Does it work well with ondelay? > I will need some UPS that supports the ondelay parameter. > Bartosz > > śr., 10 kwi 2019 o 13:06 Roger Price <roger at rogerprice.org> napisał(a):