similar to: [Fwd: [osol-discuss] SVOSUG - This Thurs, August 24, Sunay Tripathi presents Crossbow 7:30pm SCA03]

Howdy, I just finished reading through the Crossbow presentation: http://blogs.sun.com/sunay/resource/crossbow.pdf And have one question. If you create a virtual NIC with dladm: $ dladm create-vnic -d bge0 -m 0:1:2:3:4:5 -b 10000 1 Can you then add vnic1 directly to the zone? e.g.: zonecfg -z zone1 zonecfg:zone1> create zonecfg:zone1> set zonepath=/zones/zone1 zonecfg:zone1> add net

Guys, OK, now that we have the new core contributors squared away, we can go back to finishing the contributors list. There were some people who got added and then there is existing contributors list. I think Darren''s suggestion to wait to add new core contributors is fine (let the new constitution settle down and we can in the meanwhile have a more inclusive look at both rather than

Hi, I am trying to merge Lustre into Fedora 13 kernel (2.6.33.3-85.fc13.i686.PAE) I plan to submit the patches and continue to develop features on this kernel. will I get any assistance from the lustre development team. Can I maintain this patch on lustre website ? Regards, Onkar -- **************************************************** A 1965 Ford Mustang is a great car. But if you want to go

Hi, I am trying to merge Lustre into Fedora 13 kernel (2.6.33.3-85.fc13.i686.PAE) I plan to submit the patches and continue to develop features on this kernel. will I get any assistance from the lustre development team. Can I maintain this patch on lustre website ? Regards, Onkar -- **************************************************** A 1965 Ford Mustang is a great car. But if you want to go

Team, We are trying to install Crossbow on VirtualBox. Siva first tried it on Linux and reported it in Hyderabad Open Solaris User Group alias. http://opensolaris.org/os/project/hosug/ Today both of us tried it on VirtualBox running on OpenSolaris. Both attempts have the same results. a. Selecting Solaris Developer Express during boot process exits the installation. See this picture:

Hi. I tried to send this to the mailing list, but it never showed up in the archives, so I''m trying the forum instead... I recently installed the Crossbow Beta October 31 2008 on my SunFire T1000, and let me first say that I''m very pleased with the functionality it provides. What''s not so pleasing is the fact that after installing this, the computer now get very

Hi, I maintain a driver for a 10GbE nic which supports multiple hardware tx/rx rings. We can steer rx packets into rings using the "standard" NDIS6 Toeplitz hashing on TCP port numbers, IP addresses, etc. We can also steer packets based on MAC address. Would this NIC be considered to be capable of supporting crossbow? Also, can crossbow do things like steer outgoing packets to the

I am trying to compile lustre like this : [onkar at localhost build-lustre]$ ./configure --with-kernel-source-header=/home/onkar/LUSTRE/linux-2.6.33.3/include --with-linux=/home/onkar/LUSTRE/linux-2.6.33.3 --with-linux-obj=/home/onkar/LUSTRE/linux-2.6.33.3 --with-linux-config=/home/onkar/LUSTRE/linux-2.6.33.3 checking build system type... i686-pc-linux-gnu checking host system type...

I am trying to compile lustre like this : [onkar at localhost build-lustre]$ ./configure --with-kernel-source-header=/home/onkar/LUSTRE/linux-2.6.33.3/include --with-linux=/home/onkar/LUSTRE/linux-2.6.33.3 --with-linux-obj=/home/onkar/LUSTRE/linux-2.6.33.3 --with-linux-config=/home/onkar/LUSTRE/linux-2.6.33.3 checking build system type... i686-pc-linux-gnu checking host system type...

Recently I found that the mac_srs_rx_poll_ring thread may never stop in kernel, please see the following mpstat, cpu 2 is in 100% kernel usage, but no syscalls and no interrupts. CPU minf mjf xcal intr ithr csw icsw migr smtx srw syscl usr sys wt idl 0 0 0 0 300 100 0 0 1 0 0 0 0 0 0 100 1 14 0 0 134 68 134 1

Hi. After running with the crossbow bits for a while, I discovered that the network management port on my T1000 wasn''t working properly (no link light). When logging in on the serial management port and running "resetsc", I got this: --->8--- ALOM POST 1.0 Dual Port Memory Test, PASSED. TTY External - Internal Loopback Test TTY External - Internal Loopback Test, PASSED.

In crossbow, each mac_srs has a kernel thread called "mac_rx_srs_poll_ring" to poll the hardware and crossbow will wakeup this thread to poll packets from the hardware automatically. Does crossbow provide any method to disable the polling mechanism, for example disabling the this kernel thread? Thanks Zhihui -------------- next part -------------- An HTML attachment was scrubbed... URL:

I''ve been thinking about hardware that has multiple transmit rings ("tx resources"). We really should have a way to expose this up to the stack. And ideally, the stack should guarantee that a given flow will always be sent down using the same hardware tx resource. I''ve heard that crossbow will deliver this, but I can''t find evidence of it in the crossbow

Hey ..This looks very much like the user-mode linux i used to work on. not gone thru the Xen specs but what crossbow looks like is solaris version of UML[user-mode linux] . last time i was almost killed testing free/swan on a virtual testbed using UML. gosh... matching the root filesystem version with the kernel was the biggest fight...lately had to build my own with mkrootfs :) ... best view of

Hi, I was trying to download the Crossbow ISO from : http://opensolaris.org/os/project/crossbow/snapshots/ under "Crossbow Beta iso images June 6 2008" and it failed. Does anyone know of a link which is working ? Thanks for any pointers ! Regards, Sanjeev.

Hi everyone, I''m Ezequiel from Buenos Aires. I''m new in this list, so please forgive me if my questions are not the correct one''s fro this alias. I''m working as a campus ambassador in Sun, while finishing my engineer degree, creating communities around opensolaris in Argentina. I discovered this project, and this group, looking for something that I could

Folks, I just posted an updated Crossbow virtualization architecture document. The new revision is available at: http://opensolaris.org/os/project/crossbow/Docs/crossbow-virt.pdf The main changes are the addition of support for multiple MAC addresses per client, and an explicit separation between consolidation private and project private MAC API entry points. See in particular the

Dimitry Andric <dimitry <at> andric.com> writes: > > On 2010-06-15 18:28, Sunay Ismail wrote: > > I read on web that llvm compiles itself with clang, but could not find the > > instruction to achieve that. I try "./configure CC=clang CXX=clang" but get link > > errors. > > Try using CXX=clang++ instead. Always use clang++ for C++ code. :)

We have had an interesting issue with Market Data and Network Interface failures in the past with ipmp (or even VCS multinicA).. Multicast groups can not span multiple interfaces and in our environment when we have a network failure the interface is failed over however the multicast group does not. The only way to recreate the multicast group is to restart the application with the active network

Hi All, >From the design documents, I see there is an option "DLADM_VNIC_OPT_NODUPCHECK" for checking if the vnic MAC is unique on the same physical NIC. I have a question here. Does crossbow check if the MAC address is unique on the same subnet? E.g, create a vnic on hostA with hostB''s MAC address. Thanks, Karol