similar to: ata on alix/geode stopped being detcted.

Hi, after one month with gmirror and gjournal running on a 7.0-RELEASE #p2 amd64 (built from latest CVS source), the box hung a couple of times when on high disk load. Finally, while building some port it won't boot for no reason obvious to me. This is what I get with kernel.geom.mirror.debug=2: ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 476940MB <SAMSUNG HD501LJ

Hi there colleagues, atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem 0xefcb3000-0xefcb3fff irq 23 at device 5.2 on pci0 atacontrol detach ata7 - insert ATA disk (ad14) atacontrol attach ata7 pinics with Fatal trap 12: page fault while in kernel mode (kgdb) bt #0 doadump () at pcpu.h:196 #1 0xc0533227

I am having problems with silent data corruption on (some) drives connected to an MCP55 SATA controller. I have two servers, both running RELENG_7_0/amd64. One has the 570 Ultra chipset, the other has 570 SLI. Both chipsets have the MCP55 SATA controller. The server with 570 Ultra chipset has a bunch of older 250GB SATA-150 drives hooked up to the MCP55 controller and it is working just fine.

I have a couple of DVD drives (one drive, one burner) that used to play DVDs quite fine from 5.3 to somewhere in the 6.x branch. Nowadays I have to send them to PIO4 to play DVDs, because they'll just throw DMA not aligned errors around in UDMA33 or WDMA2 mode. Should someone be interested in this I'm willing to supply all necessary information, such as the exact drives, firmware

https://bugzilla.netfilter.org/show_bug.cgi?id=1138 Bug ID: 1138 Summary: icmpv6 mld-listener-query not detcted Product: nftables Version: unspecified Hardware: x86_64 OS: SuSE Linux Status: NEW Severity: normal Priority: P5 Component: kernel Assignee: pablo at netfilter.org

Thomas, Have spoken to Soren, from my bootlog he believes that the problem is in atapicam causing the system to lock up. He is happy to answer some questions but doesnt have time to delve into atapicam himself. Did you author atapicam, I have seen your name on the sourcecode, can you help me further? Whats next? Thanks Adam. -------------- next part -------------- An embedded message was

I have a Lite-On 24102B burner on an Epox 7KXA (VIA 686A southbridge) together with a few SCSI disks. I recently upgraded from FreeBSD 4.5 to 4.7 then almost immediately to 4.8. I've had trouble with the burner since. With FreeBSD 4.5, I used "sysctl hw.atamodes=---,---,dma,---" to set the burner to DMA. Everything then worked fine. As far as I know it was using UDMA33.

On reboot, one out of 10 times, reboot (from hardware initialization) stops. Referring to this portion of the dmesg -v output, of a successful boot, where i have marked ">>>HERE<<<" is where the boot freezes on an unsuccessful boot. This is a constnat problem, on 6.2 as well as 6.3 unchanged. ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting

Hello, I've got a (P)ATA disk in a special frame. The disk itself supports UDMA-100 (and has an 80-ribbon cable), but the frame isn't compatible with that. By default, FreeBSD negotiates UDMA-100, and the console starts to fill with ICRC errors. In the past, I used a patch to ata-all.c that enabled the following entry in loader.conf to force the disk to UDMA-33, so it worked fine:

OK, been perusing the archives and Google, but can't find what I want. I'm building up a 512 MB compact flash using the CLFS directions to build the filesystem. That works great, but I would like to use extlinux to make the cflash bootable on my little SBC. However, to date, no dice. Attached is my extlinux.conf file and the steps I have used to make this work. Initially I tried to

After compiling the kernel 4.9RC1 dmesg gives the following error lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ed1: <Realtek Plug & Play Ethernet Card> at port 0x220-0x23f irq 5 on isa0 ed1: address 52:54:40:28:83:9a, type NE2000 (16 bit) ad0: 4112MB <WDC AC24300L> [8912/15/63] at ata0-master WDMA2 Mounting root from ufs:/dev/ad0s1a module_register: module

Just thought I'd pass along that I have successfully installed FreeBSD 7.0 into a Xen 3.1 HVM. ?This one went as smooth as I expected, considering my experience with 6.3. ?Haven't done any benchmarking or stress testing or port installs or anything. ?But so far it's working nicely. Here's all the info. ?If you'd like to see anything else, let me know. Host hardware: ?

hi Peter, everyone, I recently installed extlinux on my CF drive. after a few botches, it works, with menu.c32 too. Heres a few notes/observations: - menuing seems pretty sensitive to presence of tabs in extlinux.conf, unlike with pxelinux.cfg/default, Is this an oversight, or something Im misremembering ? - extlinux doesnt have the timeout after menu-choice. if I dont choose, it times out and

Has anybody tried running Xen on an ALIX 2D3 board? http://www.pcengines.ch/alix2d3.htm If not, has anybody ran Xen on a seriously underpowered PC? The reason why I love these boards so much is that they run at 5W! Of course, I would only run Xen on these for testing purposes. It would just be nice to have a very low powered system that I can just "blow away" VMs when I

Hi all, I have successfully compiled and installed Asterisk on an Alix board (AMD Geode 500 Mhz + 256 Mb RAM) on top of Voyage linux (a Debian variant). I'm using it at home for a month. I wondered how much it could be loaded, so I tested it with pbx-test: I could place up to 15 simultaneous SIP calls before it got no more responsive. All in all a good, stable and cheap solution for home

Hi, I've setup a wlan ap using a an alix 2d2 (AMD Geode LX 500 Mhz + AES Offload) and am now trying to encapsulate the wlan traffic into a vpn (tap bridge). Though even when disabling crypto and digest (there is a crypto engine onboard can be setup to handle tinc encryption), the best throughput I get is aroung 2,9 MByte per second (wget+http) (even if the client is run locally). The network

I'm trying to build a bootable CD for an Advantech PCM-4153 board (based on an AMD Geode LX800) that will allow to boot from USB CD-ROM drive. I've created an ISO that will load ISOLINUX (3.51) and appears to load the kernel and initrd images, but reboots the system when it tries to run the kernel. When I use either isolinux.bin and isolinux-debug.bin, the last messages I see on screen

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all - It looks like xf86-video-geode-2.8.0.tar.bz2 file got corrupted when it was packaged and sent to the server. A fixed package has been sent, sha1sum below. Sorry for the hassle. e76b68798f84a300af6098836b5030a4a48fff37 xf86-video-geode-2.8.0.tar.bz2 Jordan -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux)

Courtesy notice for developers - the xf86-video-amd driver has been renamed to xf86-video-geode to avoid confusion with AMD's other GPU offerings. This should help cut down on mis-directed bug reports and questions. Thanks, Jordan -- Jordan Crouse Systems Software Development Engineer Advanced Micro Devices, Inc.

I'm trying to improve Opus on an AMD Geode CPU, which has limited SSE support (called 3DNow!), but MMX. Without optimizations I can only encode 16 bit audio @16KHz with complexity up to 2-3 without underruns. I tried compiling with SSE2/4 optimizations, but all I got was a crash with SIGILL, so I looked into optimized code and found that a good starting point was the dot product, so I