similar to: named.conf: query-source address

Hello, FreeBSD 7.0-RELEASE-p3 #3 $top ... PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 36032 root 2838 44 0 1917M 1493M ucond 0 406:39 3.03% CGServer ... $cat /boot/loader.conf.local ... kern.maxdsiz="1073741824" kern.maxssiz="134217728" kern.dfldsiz="1073741824" $limits Resource limits (current): ... datasize

Hello, I have a problem with loader. I recently upgraded from 6_rel to 7_rel. Now when I install world there is a problem booting. Here is what I do: cd /usr/src make buildworld make buildkernel KERNCONF=BLACK make installkernel KERNCONF=BLACK At this point I can reboot and all is good. After boot I install the new world: cd /usr/src mergemaster -p reboot into single user mode cd /usr/src make

Hi, Is there a way to make use of hardware monitoring on Intel 945GCLF (with Atom 230 cpu)? It is relatively new child of Intel, but maybe someone figured it out yet. pciconf -lv shows this: ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x464c8086 chip=0x27da8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) SMBus

Hi, Recently I've decided to play with gjournal. Main reason was a promise of avoiding full fsck check after unclean shutdown. I've successfuly configured gjournal on existing filesystems (all UFS). And then it happened - my system had a power failure. After boot, it forced me to run fsck manualy. Nothing special, I did it before... But this time it failed on gjournaled disks.

Monitoring a tcpdump between two systems, a FreeBSD 9.1 system has the following interface: msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=c011b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,TSO4,VLAN_HWTSO,LINKSTATE> ether 00:11:2f:2a:c7:03 inet 10.0.1.199 netmask 0xffffff00 broadcast 10.0.1.255 inet6 fe80::211:2fff:fe2a:c703%msk0 prefixlen 64 scopeid

Hi If I have the wrong list please feel free to redirect me. I'm running 7.0-RELEASE-p4 and trying to backup to an external USB drive. I'm using the following command dump -a0Lf /backup/diskimages/root /dev/mfid0s1a Where df: Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/mfid0s1a 507630 208436 258584 45% / /dev/da1s1d 709513458

Hello, freebsd-stable. Does somebody use some software RAID5 on FreeBSD in real production system? I want to build storage server for my home: RAW photos, multi-layer PhotoShop files and FLAC-encoded music consume a lot of space, and they should be availible both from desktop & notebook. Also, all photo-content is unique, so I need some insuranse from single HDD crash. I understand,

Hello All, I mentioned a problem with this once before, and was referred to other threads that also talked about this. But I believe a recent problem I was experiencing, may have been related to this: [: -le: argument expected. So I'd like to bring it up again, in hopes that someone might have a cure. Specifically, two printf()'s are sent to the same line, which results in a /very/ hard

I upgraded from 6.2 to 6.3 p5 last night. Upon rebooting, the second disk in the mirror is missing. # atacontrol status ar0 ar0: ATA RAID1 status: DEGRADED subdisks: 0 ad0 ONLINE 1 ---- MISSING # grep ata /var/run/dmesg.boot ad0: 238475MB <WDC WD2500AVJB-63UDA0 00.02C01> at ata0-master UDMA100 ad1: 238475MB <WDC WD2500AVJB-63UDA0 00.02C01> at ata0-slave UDMA100 ar0: disk0

Hi, Just update my 8.x kernel sources last weekend, and newly built kernel did not boot for me: link_elf: symbol mem_range_softc undefined KLD file acpi.ko - could not finalize loading kernel trap 12 with interrupts disabled This is stripped down kernel with everything possible loaded from modules. Any ideas? Did not see any warnings in UPDATING... ./danfe

(Please keep me CC'd as I'm not subscribed to the list) I'd like to request that folks running RELENG_8 (and RELENG_9, though I do not use it) please check the behaviour of their terminal after each of following commands are run (check terminal after each command): top -a (press "q" after 1 screen refresh) top -b If you find that your input characters in your shell

Hi, Whilst doing some QA work on XORP on my desktop, which has fxp0 and msk0, fxp0 got totally hosed. I was running PIM-SM and IGMPv2 router-mode on the box at the time. I wonder if this is related to the problems with fxp multicast transmission I saw back in April. I'm a bit concerned about this as fxp is still a very widespread and useful network chip. I am running

Hi, could anyone give recommendations (or share experience) regarding using ZFS: - FreeBSD 7-Stable (amd64 with 8GB RAM) + special tuning necessary (apart from increasing kernel memory to 1 or more GB for ZFS) - Samba 3.2 + ACLs possible directly under ZFS? + recommended compile options? - NFS - email (imap) - jails (I have seen some problems exist with using snaphots within

Sep 21 08:57:54 belle fsck: /dev/ad4s1d: 1 DUP I=190 Sep 21 08:57:54 belle fsck: /dev/ad4s1d: UNEXPECTED SOFT UPDATE INCONSISTENCY; RUN fsck MANUALLY. Ok, so I ran fsck manually (even with -y), but yet it refuses to clear/fix whatever to the questions posed as fsck runs. What does this all mean? Thanks, -Clint -- This message has been scanned for viruses and dangerous content by MailScanner,

Colleagues, 3 of 4 times this machine failed to boot, panicing somewhere in late kernel initialization phase (before /sbin/init is executed) I have serial console and KDB enabled, so can do experiments. Last two crashes: Fatal trap 12: page fault while in kernel mode fault virtual address = 0x8 fault code = supervisor read data, page not present instruction pointer =

Hi! I've got FreeBSD 8.3-STABLE/i386 server that can be reliably panicked using just 'squid -k rotatelog' command. It seems the system suffers from the problem described here: http://cxsecurity.com/issue/WLB-2010090156 I could not find any FreeBSD Security Advisory containing a fix. My server has 4G physical RAM (about 3.2G available) and runs squid (about 110M VSS) with 500

Hi I installed the following driver. http://www.f.csce.kyushu-u.ac.jp/~shigeaki//software/freebsd-nfe.html Before I had the nve driver which was unstable on this server and on a prior server in both cases causing either spontaneous reboot or just a crash when under load. So far touchwood the nfe driver has stayed up and running at almost 3 days uptime and has had some stress. I know the driver

Hi there, I have been looking at a system which has the Intel ICH7 south bridge. Whenever I try to probe the SMBus on this system with 'smbmsg -p', I get a lot of status=41 timeout messages in dmesg from the ichsmb(4) driver. I have been given the addresses of the SMBus peripherals and have tried initiating reads to their register space directly using 'smbmsg', with the same

Hello, i'm experiencing periodic kernel panics on a server with FreeBSD 7.0-STABLE #0: Tue May 20 19:09:43 CEST 2008. My big problem is that the system is not performing memory dumping and/or automatic reoboot, it just stays there. Here' console output: em0: watchdog timeout -- resetting kernel trap 12 with interrupts disabled Fatal trap 12: page fault while in kernel mode cpuid = 0;

Greetings I am having trouble with suspend/resume on my Thinkpad X31, running 7.0-STABLE as of April 23. Any help would be appreciated. First problem: When I run "acpiconf -s3" from mulituser mode, the system suspends immediately, without executing /etc/rc.suspend (which has mode 755); then on resume, I get a panic. Second problem: When the system panics, I don't get a dump (or