similar to: disk questions: geom and zfs

I've just setup a simple gluster storage system on Centos 5.2 x64 w/ gluster 1.3.10 I have three storage bricks and one client Everytime i run iozone across this setup, i seem to get a bad file descriptor around the 4k mark. Any thoughts why? I'm sure more info is wanted, i'm just not sure what else to include at this point. thanks [root at green gluster]# cat

Hello, This file server was upgraded from 6.2-RELEASE-p$something to 6.3-RELEASE-p3 (current RELENG_6_3 sources via csup) on August, 11 and rebooted to the new kernel on August, 12. The school is closed due to holidays. The only load is mail delivery to Maildirs via NFS from another server (just 50 mailboxes or so, none of them very busy) and nightly backups. I went there on August, 13 to perform

Hi, after one month with gmirror and gjournal running on a 7.0-RELEASE #p2 amd64 (built from latest CVS source), the box hung a couple of times when on high disk load. Finally, while building some port it won't boot for no reason obvious to me. This is what I get with kernel.geom.mirror.debug=2: ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 476940MB <SAMSUNG HD501LJ

Dear list, as described in http://www.freebsd.org/releases/6.3R/announce.html I tried a binary upgrade to 6.3R. But the command # sh freebsd-update.sh -f freebsd-update.conf -r 6.3-RELEASE upgrade failed with 10....2520....2530....2540....2550....2560....2570....2580....2590....2600....2610....2620....2630....2640... done. Applying patches... done. Fetching 1587 files... failed. Any ideas

Hi: We have a machine running 6.2-R-p10 and squid 2.6.17, and upgrade it to 6.3R yesterday, but squid will hang and eat 100% cpu time after restart about 1 hour later, machine still alive, and no response from squid. downgrade to 6.2-R-p10, everything ok again.. here is some infomations: machine type: FreeBSD 6.3-RELEASE #0: Wed Jan 23 01:58:39 CST 2008 CPU: Intel(R) Xeon(TM) CPU 2.40GHz

Hey guys, I am running gluster over infiniband, and I have a couple of questions. We have four servers, each with 1 disk that I am trying to access over infiniband using gluster. The servers look like they start okay, here are the last 10 or so lines of a client log (they are all identical): 2008-10-07 07:18:40 D [spec.y:196:section_sub] parser: child:stripe0->remote1 2008-10-07 07:18:40 D

On Tue, Dec 23, 2014 at 10:34 AM, Frank Harrell <f.harrell at vanderbilt.edu> wrote: > I am thinking about adding several geom and stat extensions to ggplot2 > in the Hmisc package. To do this requires using non-exported ggplot2 > functions as discussed in > http://stackoverflow.com/questions/18108406/creating-a-custom-stat-object-in-ggplot2 > > If I use the needed

Hi; I have created a geom_tile plot which does roughly what I want but I have a small tweak I cannot sort out. I have a dataframe binL, binR, HCount, HProbCount where HCount and HProbCount have values ranging from 1-150. I plot binL and binR on the axes respectively and create two charts with the fill being represented by HCount and HProbCount respectively. The problem is that I want

I am thinking about adding several geom and stat extensions to ggplot2 in the Hmisc package. To do this requires using non-exported ggplot2 functions as discussed in http://stackoverflow.com/questions/18108406/creating-a-custom-stat-object-in-ggplot2 If I use the needed ggplot2::: notation the package will no longer pass CRAN checks. Does anyone know of a solution? I'm assuming that

Hi all, Is it possible to change the filling of the squares used to represent the colour legend in a bar plot with ggplot? in this example, fillings are raven black, I'd like them white. ggplot(diamonds, aes(clarity, colour = cut)) + geom_bar() Regards -- ------------- Benoit Boulinguiez Ph.D student Ecole de Chimie de Rennes (ENSCR) Bureau 1.20 Equipe CIP UMR CNRS 6226 "Sciences

Hey, I'd like to apologize in advance if this is an old issue that everyone already dealt with in some new mechanism... But I compiled today's CVS for the first time in a few months, and when i tried to fire up programs/games with --desktop geom 640x480 (or any other dimensions) I get an "unknown option --desktop" error and the "usage" list pops up. I read the man

I have a FreeBSD 6.2-based server running a 1.2TB graid3 volume, which consists of 5x 320gb SATA hard drives. I've been getting errors in /var/log/messages from the graid3 volume, which I suspect means an underlying fault with one of the disks, but is there any way to decipher which one of these drives is throwing errors? I've checked smartctl -a /dev/adXX but nothing shows up there..

I have a GPT formatted disk where I recently expanded the size of a partition. I used "gpart resize -i 6 ada1" first to expand the partition to use the remaining free space and then growfs to modify the FFS file system to use the full partition. This was all done in single-user mode, of course, but when I enter "exit" to bring the system up, it failed to mount /usr. This was

Hola a todos, alguien que ya tenga en sus manos esos libros y/o otros más sobre todo sobre estadística descriptiva, inferencial, minería de datos y big data, o cualesquiera de R y que aunque haya pagado la ostia, no le importe compartirlo conmigo que no tengo la posibilidad de pagar por ellos, por favor, le estaría eternamente agradecido. Fraternalmente, Nivaildo. ----- Mensaje original -----

I'm running FreeBSD 9-STABLE as a guest under RHEL 6.4 KVM virtualisation. I have networking and storage in the FreeBSD guest using the Virtio drivers (with the virtual disk set to "Virtio" in the definition on the host). Everything is working nicely: I have a vtnet network adapter and see vtbd devices for my virtual disks in FreeBSD. Performance is much better compared with an

Se ha borrado un adjunto en formato HTML... URL: <https://stat.ethz.ch/pipermail/r-help-es/attachments/20170216/7c6f564a/attachment.html>

I have previously written about a mountroot prompt, here are some details. I have a system with an asus m3a78-emh hdmi board, a 74 gig raptor drive, and a dual core amd am2 cpu. I have had this result with both the amd64 and i386 systems. My steps were all conducted today as follows. install 7.0 release run freebsd-update get src tree build world build and install kernel reboot and be greeted

hail, I write just to make sure its dead. I've lost the first disk on a ZFS pool (jbod). Now I can't mount it with only the second disk. The first disk clicks to death :( [root@optimus ~]# zpool status pool: pool state: UNAVAIL status: One or more devices could not be opened. There are insufficient replicas for the pool to continue functioning. action: Attach the missing

hail, I have a soekris running an atom and 2GB RAM and ZFS using 7 drives, small capacity though, to test and study if I can make my home server this box and this way. It will be a simple server, three users tops. I followed the handbook and made the geli step on the disks: Geom name: label/zfs1.eli State: ACTIVE EncryptionAlgorithm: AES-XTS KeyLength: 128 Crypto: software UsedKey: 0 Flags:

With FreeBSD 6.3-RELEASE, I'm finding significant packet loss (sometimes 85%). If I insert an Intel nic (fxp), there is nil packet loss with similar tests (ping -c 100). re0: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xc800-0xc8ff mem 0xf9fff000-0xf9ffffff irq 17 at device 0.0 on pci1 I have seen a thread on current mentioning similar problems: