similar to: Panic in nfs/ffs after upgrade from 6.2 to 6.3-RELEASE

Hi, after one month with gmirror and gjournal running on a 7.0-RELEASE #p2 amd64 (built from latest CVS source), the box hung a couple of times when on high disk load. Finally, while building some port it won't boot for no reason obvious to me. This is what I get with kernel.geom.mirror.debug=2: ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 476940MB <SAMSUNG HD501LJ

Hello list, Last night one disk of my desktop machine dead causing a hard lock of the computer. It was a component of a mirror volume so it wasn't as serious as it initially looked. Unfortunately, the metadata structure of my data partition (a geom raid3 array with tree components ) seems to be corrupted by this hard lock, the following message is scrolled constantly on the screen:

Hi, We're using gmirror on our sun fire x2100 and FreeBSD 6.1-p10. Some days ago I found this in the logs: Apr 1 02:12:05 x2100 kernel: ad6: WARNING - WRITE_DMA48 UDMA ICRC error (retrying request) LBA=612960533 Apr 1 02:12:05 x2100 kernel: ad6: FAILURE - WRITE_DMA48 status=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND> LBA=612960533 Apr 1 02:12:05 x2100 kernel: GEOM_MIRROR:

I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW drive attached to an Asus A8V-MX motherboard. When I try to use burncd to burn a cd, it writes all of the data, says "fixating CD, please wait.." and then reports burncd: ioctl(CDRIOCFIXATE): Input/output error Oddly enough, the CD seems to be usable. I can successfully burn the same file if I use cdrecord. The

These are new boxes. http://www.supermicro.com/products/system/1U/5015/SYS-5015B-MT.cfm core 2 Q6600 CPU 8Gb 667 RAM Boxes were memtested from Fri-Mon okay. 6.3-RELEASE (amd64) installs fine. Build cycle okay. Running (no load) for a week or so. However, when I try to configure gmirror they hang on boot. After some fiddling it appears issuing #kldload geom_mirror hangs the boxes very hard.

I am currently running a generalized linear mixed effect model using glmer and I want to estimate how much of the variance is explained by my random factor. summary(glmer(cbind(female,male)~date+(1|dam),family=binomial,data= liz3")) Generalized linear mixed model fit by the Laplace approximation Formula: cbind(female, male) ~ date + (1 | dam) Data: liz3 AIC BIC logLik deviance 241.3

I have an Asus A8V-MX motherboard with an AMD Athlong 64 X2 3800+ CPU and I'm trying to run powerd to keep it cooler/quieter/greener. I'm running -STABLE (6.1-RC) cvsup'ed a couple of days ago, with a kernel config that consists of the SMP sample plus an atapicam device. I'm loading the cpufreq.ko module in /boot/loader.conf. I've attached my dmesg output and sysctl -a

Good morning, I'm having a bit of an issue getting a 3CR990B-TXM NIC detected and usable. Just wondering if anyone knows of any issues with this NIC chipset and/or with the motherboard chipset. The motherboard is a Biostar GeForce 6100 AM2 using an nVidia nForce 410 chipset and nVidia GeForce 6100 vide chipset. I've tried FreeBSD 6.1, 6.2, 6-STABLE (from Wed), and 7-CURRENT (from

Hi there, from time to time my PC panics when I insert an empty DVD or CD-R. The kernel locks up instantly after the DVD writer's tray is closed. It seems burning the first DVD isn't critical but inserting the second one seems susceptible. I use k3b as software, which polls the hardware while the tray is open, maybe it's something with hald. Don't know, just use this. I

Hi I have a newly installed FreeBSD 6.0 release machine on which I am getting the following error on the console: "ad4: req=0xc23bc258 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !!" This is generally associated with heightened disk activity, but it happens inevitably after a while (minutes or hours) if the machine is running. The atacontrol list shows:

Hi, I have a problem, probably with the SiI 3512 SATA150 controller in a dual-Opteron IBM eServer 326: Every once a while the kernel issues a message like: ad4: TIMEOUT - WRITE_DMA retrying (2 retries left) LBA=150190687 The system waits a few seconds and continues to work normally. It typically occurs several times a day most likely depending on the load of the (SATA connected) hard drive.

Hello, My server is experiencing occasional kernel panics when under moderate load. I'm attaching a crash dump and the dmesg output. I'm not sure how to read the kernel backtrace but it looks like the Intel NIC (em0) caused the problem. Occasionally, I used to get a "em0: watchdog timeout -- resetting" error message, but I never had a kernel panic. The problem started last

I have a current RELENG_7 running on: http://www.supermicro.com/products/system/4U/7045/SYS-7045B-TR+.cfm with the -3+ IPMI card. I can interact with the BIOS, etc, but no joy once we get past the loader. Anyone have ideas? Attached is the kernel config, and the /var/run/dmesg.boot file. -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 512-248-2683

hail, I have a 7-stable: [matheus@xxx /usr/home/matheus]$ uname -a FreeBSD xxx 7.0-STABLE FreeBSD 7.0-STABLE #2: Sun Jul 6 15:03:26 BRT 2008 root@lamneth:/usr/obj/usr/src/sys/xxx_7 i386 and there exists three geom things. gconcat status Name Status Components concat/concat0 UP ad4 ad5 gmirror status Name Status Components

Hi. Sometimes I see much contention in smp_tlb_shootdown while running sysbench: sysbench --test=fileio --num-threads=8 --file-test-mode=rndrd --file-total-size=3G run kern.smp.cpus: 8 FreeBSD 7.1-R CPU: 0.8% user, 0.0% nice, 93.8% system, 0.0% interrupt, 5.4% idle Mem: 11M Active, 2873M Inact, 282M Wired, 8K Cache, 214M Buf, 765M Free Swap: 4096M Total, 4096M Free PID USERNAME PRI NICE

One of our FreeBSD boxes has a SCSI controller and disk, which showed problems earlier this week. There was a lot of of chatter from the SCSI driver in /var/log/messages and to the console. However, the console is unattended and we only discovered the problem subsequently because /var/log/console.log didn't show any of the chatter. console.log is otherwise working, and very helpful (e.g. it

Hi, I've been following a similar and current thread about name resolution from LINUX side. I have exactly the opposite problem (running ubuntu 7.10 on a network with a mixture ubuntu 6.06, WinXP and WinVista boxes) The winboxes cannot see or mount this 7.10 box I can mount WinPC shares on this 7.10 box. I was wondering about firewalls, but I can ping this 7.10 from the WinBox by IP address

Hello Got strange problem with high system "%system load" and very slow user level programs (apache+php+mysql) behavior gstat shows 1.5-4% hard disk busy load but system shows about 20-30% load while user load is max 5%. vmstat shows from 2 to 35 process in "b" state. Now use 7.0-RELEASE-p5 , but the same problem was with 7.0-RELEASE. And have no idea what to do with this.

Hi all, I have some problems with my gvinum setup after the system panic'ed. Afterwards the system fails finding the plexes to the subdisks (or at least that is what I can understand after having searched the gvinum source code for the error string in the DMESG log..) The machine is an IBM Netfinity 5000 and the internal HW self tests does not find any errors in the hw. Luckily my root is

Hello everybody, Please, help to fix me a problem. I have a distributed-replicated volume between two servers. On each server I have 2 RAID-10 arrays, that replicated between servers. Brick gl1:/mnt/brick1/gm0 49153 0 Y 13910 Brick gl0:/mnt/brick0/gm0 N/A N/A N N/A Brick gl0:/mnt/brick1/gm0 N/A