similar to: bin/121684: : dump(8) frequently hangs

Hi If I have the wrong list please feel free to redirect me. I'm running 7.0-RELEASE-p4 and trying to backup to an external USB drive. I'm using the following command dump -a0Lf /backup/diskimages/root /dev/mfid0s1a Where df: Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/mfid0s1a 507630 208436 258584 45% / /dev/da1s1d 709513458

Sep 21 08:57:54 belle fsck: /dev/ad4s1d: 1 DUP I=190 Sep 21 08:57:54 belle fsck: /dev/ad4s1d: UNEXPECTED SOFT UPDATE INCONSISTENCY; RUN fsck MANUALLY. Ok, so I ran fsck manually (even with -y), but yet it refuses to clear/fix whatever to the questions posed as fsck runs. What does this all mean? Thanks, -Clint -- This message has been scanned for viruses and dangerous content by MailScanner,

With the introduction of zfs to FreeBSD 7.0, a door has opened for more mirroring options so I would like to get some opinions on what direction I should take for the following scenario. Basically I have 2 machines that are "clones" of each other (master and slave) wherein one will be serving up samba shares. Each server has one disk to hold the OS (not mirrored) and then 3 disks, each

I wouldn't report this if not for one coincidence (which is described below). I have too little facts, so this is more of a mystery problem tale than a real problem report. There are two systems: 1. old, slow, i386, UP, 7-STABLE 2. new, fast, amd64, MP, 6.3-RELEASE Systems are located at different physical locations. What is common between them: 1. they both have the same backup strategy

I've been playing around with snapshots lately but I've got a problem on one of my servers running 7-STABLE amd64: FreeBSD paladin 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #8: Mon Nov 10 20:49:51 GMT 2008 tdb@paladin:/usr/obj/usr/src/sys/PALADIN amd64 I run the mksnap_ffs command to take the snapshot and some time later the system completely freezes up: paladin# cd /u2/.snap/ paladin#

One line summary: Too many files in a top-level UFS-2 filesystem directory will cause a panic on mount. Kern/Critical/High Priority/SW-Bug Which FreeBSD Release You Are Using: 6.3-STABLE Environment (output of "uname -a" on the problem machine): FreeBSD wahoo.sd67dfl.org 6.3-STABLE FreeBSD 6.3-STABLE #0: Sun Feb 10 21:13:39 CST 2008

One line summary: Too many files in a top-level UFS-2 filesystem directory will cause a panic on mount. Kern/Critical/High Priority/SW-Bug Which FreeBSD Release You Are Using: 6.3-STABLE Environment (output of "uname -a" on the problem machine): FreeBSD wahoo.sd67dfl.org 6.3-STABLE FreeBSD 6.3-STABLE #0: Sun Feb 10 21:13:39 CST 2008

Hello, I have a problem with loader. I recently upgraded from 6_rel to 7_rel. Now when I install world there is a problem booting. Here is what I do: cd /usr/src make buildworld make buildkernel KERNCONF=BLACK make installkernel KERNCONF=BLACK At this point I can reboot and all is good. After boot I install the new world: cd /usr/src mergemaster -p reboot into single user mode cd /usr/src make

On May 25, 2014 3:39 AM, "Geert Stappers" <stappers at stappers.nl> wrote: > > > While going throug old posts found: > > Op 2013-08-31 om 17:01 schreef Raphael S.Carvalho: > > Calc the size of ldlinux.sys from ldlinux.bin, and check if it exceeds the limit. > > ldlinux.sys must fit between the bootsector and two copies of ADV whose size may vary. >

Hello All, I mentioned a problem with this once before, and was referred to other threads that also talked about this. But I believe a recent problem I was experiencing, may have been related to this: [: -le: argument expected. So I'd like to bring it up again, in hopes that someone might have a cure. Specifically, two printf()'s are sent to the same line, which results in a /very/ hard

Hi, Whilst doing some QA work on XORP on my desktop, which has fxp0 and msk0, fxp0 got totally hosed. I was running PIM-SM and IGMPv2 router-mode on the box at the time. I wonder if this is related to the problems with fxp multicast transmission I saw back in April. I'm a bit concerned about this as fxp is still a very widespread and useful network chip. I am running

> On May 25, 2014 3:39 AM, "Geert Stappers" <stappers at stappers.nl> wrote: > > > > > > While going throug old posts found: > > > > Op 2013-08-31 om 17:01 schreef Raphael S.Carvalho: > > > Calc the size of ldlinux.sys from ldlinux.bin, and check if it exceeds > the limit. > > > ldlinux.sys must fit between the bootsector and

Hi, Is there a way to make use of hardware monitoring on Intel 945GCLF (with Atom 230 cpu)? It is relatively new child of Intel, but maybe someone figured it out yet. pciconf -lv shows this: ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x464c8086 chip=0x27da8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) SMBus

Greetings I am having trouble with suspend/resume on my Thinkpad X31, running 7.0-STABLE as of April 23. Any help would be appreciated. First problem: When I run "acpiconf -s3" from mulituser mode, the system suspends immediately, without executing /etc/rc.suspend (which has mode 755); then on resume, I get a panic. Second problem: When the system panics, I don't get a dump (or

It's needed to enumerate both UFS1/2 since they have different magic numbers and super block offsets. Besides, UFS2 can be installed in the 0-64k range like BTRFS, whereas UFS1 can't. Signed-off-by: Raphael S.Carvalho <raphael.scarv at gmail.com> --- extlinux/main.c | 71 +++++++++--- extlinux/ufs.h | 26 ++++ extlinux/ufs_fs.h | 307

HI, i have updatete to 6.1-PRERELEASE and after the "installworld" step GRUB is unable to boot FreeBSD. After i did the installworld and rebooted the GRUB error was: 23 : Error while parsing number I have reinstalled the standard FreeBSD loader for now. Booting with a GRUB boot-floppy i am able to start either XP or Linux but trying to start FreeBSD the system just reboots, no

I upgraded from 6.2 to 6.3 p5 last night. Upon rebooting, the second disk in the mirror is missing. # atacontrol status ar0 ar0: ATA RAID1 status: DEGRADED subdisks: 0 ad0 ONLINE 1 ---- MISSING # grep ata /var/run/dmesg.boot ad0: 238475MB <WDC WD2500AVJB-63UDA0 00.02C01> at ata0-master UDMA100 ad1: 238475MB <WDC WD2500AVJB-63UDA0 00.02C01> at ata0-slave UDMA100 ar0: disk0

Hi I installed the following driver. http://www.f.csce.kyushu-u.ac.jp/~shigeaki//software/freebsd-nfe.html Before I had the nve driver which was unstable on this server and on a prior server in both cases causing either spontaneous reboot or just a crash when under load. So far touchwood the nfe driver has stayed up and running at almost 3 days uptime and has had some stress. I know the driver

Colleagues, 3 of 4 times this machine failed to boot, panicing somewhere in late kernel initialization phase (before /sbin/init is executed) I have serial console and KDB enabled, so can do experiments. Last two crashes: Fatal trap 12: page fault while in kernel mode fault virtual address = 0x8 fault code = supervisor read data, page not present instruction pointer =

From: Raphael S. Carvalho <raphael.scarv at gmail.com> Change since v1: * Fix bug on dentry structure (thank you specification; btw, sarcasm), and consequently a bug on ufs_readdir. * Add readlink support (applied tests for symlinks whose destionation path were stored in blk pointers and the file itself). * Several improvements. Wrote the documentation below. I think it would be good to