similar to: Sol 10 x86_64 intermittent SATA device locks up server

Hey all, I''m not sure if this is a ZFS bug or a hardware issue I''m having - any pointers would be great! Following contents include: - high-level info about my system - my first thought to debugging this - stack trace - format output - zpool status output - dmesg output High-Level Info About My System --------------------------------------------- - fresh

Hello zfs-discuss, One of a disk started to behave strangely. Apr 11 16:07:42 thumper-9.srv sata: [ID 801593 kern.notice] NOTICE: /pci at 1,0/pci1022,7458 at 3/pci11ab,11ab at 1: Apr 11 16:07:42 thumper-9.srv port 6: device reset Apr 11 16:07:42 thumper-9.srv scsi: [ID 107833 kern.warning] WARNING: /pci at 1,0/pci1022,7458 at 3/pci11ab,11ab at 1/disk at 6,0 (sd27): Apr 11 16:07:42 thumper-9.srv

Hello, I am not sure if I am posting in the correct forum, but it seems somewhat zfs related, so I thought I''d share it. While the machine was idle, I started a scrub. Around the time the scrubbing was supposed to be finished, the machine panicked. This might be related to the ''metadata corruption'' that happened earlier to me. Here is the log, any ideas? Oct 24

After applying 125205-07 on two X4500 machines running Sol10U4 and removing "set sata:sata_func_enable = 0x5" from /etc/system to re-enable NCQ, I am again observing drive disconnect error messages. This in spite of the patch description which claims multiple fixes in this area: 6587133 repeated DMA command timeouts and device resets on x4500 6538627 x4500 message logs contain multiple

I am studying on statistical shape analysis, I wonder is there any way or package available that I can perform Euclidean Distance Matrix Analysis (EDMA I or EDMA II) in R... thanks Gokhan -- View this message in context: http://r.789695.n4.nabble.com/Euclidean-Distance-Matrix-Analysis-EDMA-in-R-tp2266797p2266797.html Sent from the R help mailing list archive at Nabble.com.

Hello, I was using a bunch of cpios in initramfs as a working system, and wondering why the unused files weren't being paged out to swap. So I reread ramfs-rootfs-initramfs.txt and now I know. So I wrote the attached utility. It creates a tmpfs, moves all files on the initramfs, moves / and executes the real init. It works, even with hardlinks, but it isn't the correct approach. Have

Hi, I have a SATA PCIe 6Gbps 4 port controller card made by Startech. The kernel (Linux viz1 2.6.32-220.4.1.el6.x86_64) sees it as Marvell Technology Group Ltd. 88SE9123 I use it to provide extra SATA ports to a raid system. The HD's are all "WD2003FYYS" and so run at 3Gbps on the 6Gbps controller. However I am seeing lots of instances of errors like this

I''ve been trying to get either smartctl or sg3_utils to report properly. They both have the same low-level problems which leads me to suspect either I''m doing something wrong OR there is a problem in the marvell88sx / sd / SATA etc framework. I can access drive name/serial number of all drives on the SAT2 card and the temperature is returned from the IE log page on my two

I have a Solaris 10 U8 box (142901-14) running as an NFS server with a 23 disk zpool behind it (three RAIDZ2 vdevs). We have a single Intel X-25E SSD operating as an slog ZIL device attached to a SATA port on this machine''s motherboard. The rest of the drives are in a hot-swap enclosure. Infrequently (maybe once every 4-6 weeks), the zpool on the box stops responding and although we

Hi I've compiled and installed 2.2.5 on a Solaris 2.8 box. When attempting to browse the workgroup, a popup messages is displayed: Simple is not accessible. A device attached to the system is not functioning If I check the log file, the following error messages show up: ............ Jul 3 10:08:26 serv03 smbd[1544]: [ID 702911 daemon.error] [2002/07/03 10:08:26, 0]

Hi All: I have a Cisco3620 with a proper T1/PRI card installed with asterisk running on the same LAN. Since I have lit up the line, I can dial out and make calls to regular lands lines. However when a call comes back in it rings the destination phone once and disconnects. Here is an error from my router 15:40:45: ISDN Se1/0:23 SERROR: L3_GetUser_NLCB: EVENT 0X45 No NLCB 2 15:40:45: ISDN

After having massive problems with a supermicro X7DBE box using AOC-SAT2-MV8 Marvell controllers and opensolaris snv79 (same as described here: http://sunsolve.sun.com/search/document.do?assetkey=1-66-233341-1) we just start over using new hardware and opensolaris 2008.05 upgraded to snv94. We used again a supermicro X7DBE but now with two LSI SAS3081E SAS controllers. And guess what? Now we get

I was rsync'ing data from one system to another, and the recipient suddenly started throwing DRDY errors. Now, it's a fairly new WD Red 3TB, and I'd think it was just a bad drive... but I'm really confused by this, from the logs: Jun 15 15:34:43 <servername> kernel: ata3: SError: { Dispar } Dispar? And googling, every reference I find to that word always has something else

On 06/16/15 07:59, Ashish Yadav wrote: > Hi, > > On Tue, Jun 16, 2015 at 2:26 AM, <m.roth at 5-cent.us> wrote: > >> I was rsync'ing data from one system to another, and the recipient >> suddenly started throwing DRDY errors. Now, it's a fairly new WD Red 3TB, >> and I'd think it was just a bad drive... but I'm really confused by this, >>

On Fri, 2013-09-06 at 16:39 +0200, Alessandro Vesely wrote: Both sets of log contain stuff like: > Sep 6 15:22:53 pcale kernel: [ 126.828195] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x80000 action 0x6 frozen > Sep 6 15:22:53 pcale kernel: [ 126.828199] ata4: SError: { 10B8B } > Sep 6 15:22:53 pcale kernel: [ 126.828201] ata4.00: failed command: SMART > Sep 6 15:22:53 pcale

Valeri Galtsev wrote: > > On Tue, June 16, 2015 7:11 am, mark wrote: >> On 06/16/15 07:59, Ashish Yadav wrote: >>> Hi, >>> >>> On Tue, Jun 16, 2015 at 2:26 AM, <m.roth at 5-cent.us> wrote: >>> >>>> I was rsync'ing data from one system to another, and the recipient >>>> suddenly started throwing DRDY errors. Now,

Every day we see pause times of sometime 60 seconds to read 1K of a file for local reads as well as NFS in a test setup. We have a x4500 setup as a single 4*( raid2z 9 + 2)+2 spare pool and have the files system mounted over v5 krb5 NFS and accessed directly. The pool is a 20TB pool and is using . There are three filesystems, backup, test and home. Test has about 20 million files and uses 4TB.

Hi everyone, I would like to request the following features for Sweave: 1. The keep.source option, to respect empty lines in input. 2. The prefix.string option, to apply to all generated files, e.g. no Rplots.pdf. 3. That Sweave, doesn't change the graphics settings for the entire Latex Document. By default including a pdf image, should use it's actual size, rather than making it a fixed

I am having problems with silent data corruption on (some) drives connected to an MCP55 SATA controller. I have two servers, both running RELENG_7_0/amd64. One has the 570 Ultra chipset, the other has 570 SLI. Both chipsets have the MCP55 SATA controller. The server with 570 Ultra chipset has a bunch of older 250GB SATA-150 drives hooked up to the MCP55 controller and it is working just fine.

Hello all, Probably a stupid question, but I'll ask the pros just to be sure. Time for a new hard drive? ---- Nov 16 17:35:42 weather3 kernel: ata1.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x6 Nov 16 17:35:42 weather3 kernel: ata1: SError: { HostInt 10B8B } Nov 16 17:35:42 weather3 kernel: ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0 Nov 16 17:35:42 weather3