similar to: ZFS caught resilvering when only one side of mirror persent

I''ve got a zpool that has 4 raidz2 vdevs each with 4 disks (750GB), plus 4 spares. At one point 2 disks failed (in different vdevs). The message in /var/adm/messages for the disks were ''device busy too long''. Then SMF printed this message: Nov 23 04:23:51 x.x.com EVENT-TIME: Fri Nov 23 04:23:51 EST 2007 Nov 23 04:23:51 x.x.com PLATFORM: Sun Fire X4200 M2, CSN:

I know this topic has been discussed many times... but what the hell makes zpool resilvering so slow? I''m running OpenSolaris 2009.06. I have had a large number of problematic disks due to a bad production batch, leading me to resilver quite a few times, progressively replacing each disk as it dies (and now preemptively removing disks.) My complaint is that resilvering ends up

I am curious why zpool status reports a pool to be in the DEGRADED state after a drive in a raidz2 vdev has been successfully replaced. In this particular case drive c0t6d0 was failing so I ran, zpool offline home/c0t6d0 zpool replace home c0t6d0 c8t1d0 and after the resilvering finished the pool reports a degraded state. Hopefully this is incorrect. At this point is the vdev in question now has

After several days of trying to get a 1.5TB drive to resilver and it continually restarting, I eliminated all of the snapshot-taking facilities which were enabled and 2009-10-29.14:58:41 [internal pool scrub done txg:567780] complete=0 2009-10-29.14:58:41 [internal pool scrub txg:567780] func=1 mintxg=3 maxtxg=567354 2009-10-29.16:52:53 [internal pool scrub done txg:567999] complete=0

I executed sync just before this happened.... ultra:ultra# mdb -k unix.0 vmcore.0 Loading modules: [ unix krtld genunix specfs dtrace ufs sd pcipsy md ip sctp usba fctl nca crypto zfs random nfs ptm cpc fcip sppp lofs ] > $c vpanic(7b653bd8, 7036fca0, 7036fc70, 7b652990, 0, 60002d0b480) zio_done+0x284(60002d0b480, 0, a8, 7036fca0, 0, 60000b08d80) zio_vdev_io_assess+0x178(60002d0b480, 8000,

Hello everyone, As one of the steps of improving my ZFS home fileserver (snv_134) I wanted to replace a 1TB disk with a newer one of the same vendor/model/size because this new one has 64MB cache vs. 16MB in the previous one. The removed disk will be use for backups, so I thought it''s better off to have a 64MB cache disk in the on-line pool than in the backup set sitting off-line all

I''m in well over my head with this report from zpool status saying: root # zpool status z3 pool: z3 state: DEGRADED status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: http://www.sun.com/msg/ZFS-8000-8A

Hello All I read this thread Resilver/scrub times? for a few minutes and I have recognize that I dont know the different between Resilvering and Scrubing. Shame on me. :-( I dont find some declarations in the man-pages and I know the command to start scrubing "zpool scrub tank" but what is the command to start resilver and what is the different? -- Best Regards Alexander Dezember, 20

I have a situation where my zpool (with two radiz2s) is resilvering and reaches a certain point, then starts over. There no read, write or checksum errors. The disks do have a fair amount of resilvering to do, as I''ve had a variety of disk failures. But at the core of things, there''s enough parity data to avoid data loss, and the zpool is functioning fine, albeit in a

I''ve got a Thumper running snv_57 and a large ZFS pool. I recently noticed a drive throwing some read errors, so I did the right thing and zfs replaced it with a spare. Everything went well, but the resilvering process seems to be taking an eternity: # zpool status pool: bigpool state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was

Hi, I have Dell md1200 connected to two heads ( Dell R710 ). The heads have Perc H800 card and drives are configured in Raid0 ( Virtual Disk) in the RAID controller. One of the drives had crashed and is replaced by a spare. Resilvering was triggered but fails to complete due to drives going offline. I have to reboot the head ( R710) and drives comes online. This happened repeatedly when

So I just imported an old zpool onto this new system. The problem would be one drive (c4d0) is showing up twice. First it''s displayed as ONLINE, then it''s displayed as "UNAVAIL". This is obviously causing a problem as the zpool now thinks it''s in a degraded state, even though all drives are there, and all are online. This pool should have 7 drives total,

Just look at this. I thought all the restarting resilver bugs were fixed, but it looks like something odd is still happening at the start: Status immediately after starting resilver: # zpool status pool: rc-pool state: DEGRADED status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine

Yesterday morning I awoke to alerts from my SAN that one of my OS disks was faulty, FMA said it was in hardware failure. By the time I got to work (1.5 hours after the email) ALL of my pools were in a degraded state, and "tank" my primary pool had kicked in two hot spares because it was so discombobulated. ------------------- EMAIL ------------------- List of faulty resources:

Hi list, Here''s my case : pool: mypool state: DEGRADED status: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state. action: Wait for the resilver to complete. scrub: resilver in progress for 147h19m, 100.00% done, 0h0m to go config: NAME STATE READ WRITE CKSUM filerbackup13

Hi, I don''t have means to replicate this issue nor file a bug about it so I''d like your opinion about these issues or perhaps make bug report if necessary. In scenario where is say three raidz2 groups consisting several disks, two disks fail in different raidz-groups. You have degraded pool and two degraded raidz2 groups. Now, one replaces first disk and starts resilvering, it

Hello zfs-discuss, One of a disk started to behave strangely. Apr 11 16:07:42 thumper-9.srv sata: [ID 801593 kern.notice] NOTICE: /pci at 1,0/pci1022,7458 at 3/pci11ab,11ab at 1: Apr 11 16:07:42 thumper-9.srv port 6: device reset Apr 11 16:07:42 thumper-9.srv scsi: [ID 107833 kern.warning] WARNING: /pci at 1,0/pci1022,7458 at 3/pci11ab,11ab at 1/disk at 6,0 (sd27): Apr 11 16:07:42 thumper-9.srv

Hello, I''m thinking about a setup that looks like this: - 2 headnodes with FC connectivity (OpenSolaris) - 2 backend FC srtorages (Disk Shelves with RAID Controllers presenting a huge 15 TB RAID5) - 2 datacenters (distance 1 km with dark fibre) - one headnode and one storage in each data center (Sorry for this ascii art :) ( Data Center 1) <--1km--> (Data

Hi all, I recently experienced a disk failure on my home server and observed checksum errors while resilvering the pool and on the first scrub after the resilver had completed. Now everything seems fine but I''m posting this to get help with calming my nerves and detect any possible future faults. Lets start with some specs. OSOL 2009.06 Intel SASUC8i (w LSI 1.30IT FW) Gigabyte

I''m having a serious problem with a customer running a T2000 with ZFS configured as raidz1 with 4 disks, no spare. The machine is mostly a cyrus imap server and web application server to run the ajax app to email. Yesterday we had a heavy slow down. Tomcat runs smoothly, but the imap access is very slow, also through a direct imap client runnining on LAN PCs. We figured out that the 4th