similar to: ZFS disables nfs/server on a host

Working to get ZFS to run on a minimal Solaris 10 U2 configuration. In this scenario, ZFS is included the miniroot which is booted into RAM. When trying to share one of the filesystems, an assertion is raised - see below. If the version of source on OpenSolaris.org matches Solaris 10 U2, then it looks like it''s associated with a popen of /usr/sbin/share. Can anyone shed any

Not that I''m much of a Solaris guy, and definitely not a Solaris 10 guy, but since nobody else had posted anything yet: http://reductivelabs.com/trac/puppet/wiki/PuppetSolaris#Solaris10 The good news is that it appears to be a completely hands-off puppetd installation. Just sign the client key afterwards on the puppetmaster and you''re set. The bad news is that it''s

Hello I'm in the process of putting SMB onto a dual Opteron x64 box running Solaris 10, with the SFW samba as supplied by Sun. I haven't found any hooks for this for the new SMF/SVC startup system, so I'm doing so now, but before I go any further, am I duplicating any efforts? Is anyone else doing this and has done it? At present I'm only starting smbd and nmbd (I never really

Thought I''d drop a note about my experience with running mongrel directly under the solaris service management framework. So far I''m very impressed. SMF is the solaris replacement for the init system. It''s tied much more closely to the OS and for instance doesn''t use pid files. I''ve found you can completely eliminate mongrel cluster, and for that

redirecting to crossbow-discuss... On 03/12/09 15:17, Andrew Gabriel wrote: > In snv_108, I''m playing with creating a vnic over an etherstub, and I > might not be doing it right, but the behaviour I''m seeing doesn''t look > right either. > > So this is what I did... > > # dladm create-etherstub estub0 > # dladm create-vnic -l estub0 vnic0 > #

I''m running Xen on Nexenta Core, and I haven''t yet figured out how to control which DomU''s are started with svcadm enable svc:/system/xvm/domains:default. virsh doesn''t seem to be available with Nexenta Core, so I''d rather edit the configuration files by hand. However, I''ve found neither OpenSolaris or Nexenta documentation on how this is

Hello folks, I''ve been looking into how I might check (and possibly set) svc properties via puppet. The closest I''ve found, is the provider/service/smf stuff. However, that seems to only allow enabling and disabling of services. NOT of configuring properties. Is there some way I dont know of, how to do that? If not, and I need to write something... under which module/plugin/

I am sponsoring this fasttrack for John Levon. It is set to expire on 3/14/2007. Note that this is an externally visible case. liane --- SMF services for Xen 1. Introduction This case introduces the SMF services used by a Solaris-based domain 0 when running on Xen, or a Xen-compatible hypervisor. All of these services only run on domain 0 when booted under Xen virtualisation.

I got a copy of the latest samba build from the samba site, v4.1.11. I compiled and installed it with the default options on OpenIndiana 151.1.8. I previously had samba installed from the openindiana repository but this stopped working after my windows folks made security changes to AD. I suspect the older version of samba in the repo 3.5.21-0.151.1.8 lacks certain functionality to enable it to

Hi, I''ve just changed my debian preseed configuration to install the debian unstable package of puppet v0.22.1. As part of the preseed I have a late command that clobbers the /etc/init.d/puppet file into using the puppet standalone program and not the puppetd (as this is what I''m using). Since the upgrade to 0.22.1 every boot hangs during the initd. Going into standalone mode

Hi all, I''ll attach a new version zfs-auto-snapshot including some more improvements, and probably some new bugs. Seriously, I have tested it, but certainly not all functionality, so please let me know about any (new) problems you come across. Except from the change log: - Added support to schedule using at(1), see README.zfs-auto-snapshot.txt - take_snapshot will only run if

http://dlc.sun.com/osol/on/downloads/b114/ This URL makes me think that if I just sit down and figure out how to compile OpenSolaris, I can try b114 now^h^h^h eventually ? I am really eager to try out the new quota support.. has someone already tried compiling it perhaps? How complicated is compiling osol compared to, say, NetBSD/FreeBSD, Linux etc ? (IRIX and its quickstarting??) --

Hi, I''m searching for a tutorial to install correctly a xen domU on OpenSolaris domO. Please help me ... -- This message posted from opensolaris.org

Short:     Which package do I need to install to get "auto/I18N/Langinfo/autosplit.ix"? Long: The problem I have was discussed almost a year ago (see this thread), but the resolution was not complete... I''m using Mark Johnson''s slim.py script (package list below), against repo=http://pkg.opensolaris.org/dev, followed by `pkg install xvm-gui` and `svcadm enable

I filed this RFE earlier, since there is no way for non sun personel to see this RFE for a while I am posting it here, and asking for feedback from the community. [Fwd: CR 6470231 Created P5 opensolaris/triage-queue Add an inuse check that is inforced even if import -f is used.] Inbox Assign a GTD Label to this Conversation: [Show] Statuses: Next Action, Action, Waiting On, SomeDay, Finished

I've searched the archive for this mailing list and the bug list for OpenSSH for this, and I'm finding nothing. I'd appreciate it if somoene could point me to an existing thread about this. (I know that other people are aware of the problem, though, so I'm a bit surprised to find nothing.) We're running OpenSSH under Solaris 10 using SMF instead of a legacy init script. SMF

Completely fresh,virgin install of b115 SXCE ,zero modifications done. If select XVM from boot menu,it comes all the way till "Starting Desktop login on Display:0..." and reboots. Regular Solaris(not XVM) boots fine. Intel XEON CPU,8G RAM Intel S3210SHLX motherboard(http://www.intel.com/Products/Server/Motherboards/Entry-S3200SH/Entry-S3200SH-overview.htm) Please help and thanks a lot

This fast-track covers the SMF-related changes for dom0. This is a final draft, so any comments by the end of the week please... Man pages are attached. thanks john SMF services for Xen 1. Introduction This case introduces the SMF services used by a Solaris-based domain 0 when running on Xen, or a Xen-compatible hypervisor. All of these services only run on domain 0 when booted

Hi All, I have a machine with three network cards, and the third card(named e1000g2) is in use now. I want to use e1000g2 as default NIC when I create Guest. How can I change the default NIC? I can override the default value of config/default-nic property of svc:/system/xvm/xend. But xend still use e1000g0 when creating Guest. BTW, I can explicitly set "bridge=e1000g2" when creating

We've been happily running Dovecot in Solaris 10 for about 8 months now. Yesterday, Solaris 10's SMF put it in maintenance mode (shut it down) seemingly out of the blue. The only thing going on was that I had updated the ssl certificate. We had previously been using a self signed cert. Now we have a cert from InCommon. We had a problem with a few users who are still on ancient Eudora