similar to: creating script for init.d

Hi all, I need a little help, i am studing htb to control user bandwidth (download/upload) and I made a script as below to test. I am testing using ttcp tool from by linux box to other linux (192.168.200.51). my box <---- Linux = more than 128kbit mybot -----> Linux = get 128kbit But I want to control both ways, what am I missing? script: EXTIF=eth0 INTIF=eth1 TC=/sbin/tc DOWN=128

ei tuka imam edin pf conf obache pravi mnogo nomera, kato se pusne parvoto koeto e dropva paketi, timeoutva po serverite i t.n.. i speed-a e mnogo baven, vijte ako nqkoi moje da otkrie generalna greshka da reply :) vapreki che ne e freebsd-specific :P ne sym go pisal az a i ne sam mnogo mnogo zapoznat s pf zatova ako nqkoi moje da pomogne e dobre doshyl :) btw moje i neshto ot tia opcii kato set

Hi, I am trying to setup a shaper for my linux box and I am experiencing some problems. What I am trying to do is priorizing packets on the egress link, therefore I have setup some prio classes etc. The priorizing seem to work but the problem is that the ceil parameter doesnt seem to work on non leafs. This is what stats show: > class htb 1:1 root rate 3000bit ceil 3000bit burst 1602b/8 mpu

I suppose a few questions pop up on this list about access Samba through a firewall. ?I have been very successful running Samba through a firewall, until today. ?I hit a stumbling block. I have a Linux Firewall with the public IP Address of 134.x.x.140 <it is not the exact ip address, but close>. ?I am using NAT and port forwarding to send traffic destined for 137, 138,139, and 445 for BOTH

I have a little home network with one Windows 98 PC and a pc running linux. My idea is that as soon as DSL is finally made available to my area (which I keep getting told will be real soon now) I want to route it through the linux box and up to the Windows PC, using IP masquerading, etc. At present I have samba enabled on the unix box which opens up several worthwhile conveniences to me:

Hi! I have some problem in my asterisk 1.4.2, I've installed it on centOS 5.2 and this didn't accept voip QoS and can't route the packets having voip QoS. So I should change voip packets to be routing with centOS. I want to use iproute2 but i don't what to do after installing iproute2. Anyone could help me please? -------------- next part -------------- An HTML attachment was

Hello, I am trying to get LDAP running. So far, the server is running but I cannot connect to port 389 or the server using webmin or phpldapadmin. It could be my ISP has blocked this port but I'm not sure. I have tried to telnet to port 389 but it is refused. All other services run fine. I user the iptables ruleset found in the IP-Masquerade HowTo. Below is the ruleset I follow for

Hello, I have a webcam that I wish to view from the internet. It is a wireless linksys model with an ip address of 192.168.1.15. I have it set on port 8081, 192.168.1.15:8081. I am using the IP Masquerade HowTo script. Here's the rule I added to my firewall script: EXTIF="ppp0" INTIF="eth1" EXTIP="`$IFCONFIG $EXTIF | grep inet | cut -d : -f 2 | cut -d \ -f

I'm trying to connect a sip call from sipgate to Asterisk A to Asterisk B. Both are behind NAT, but port forwarded. I get the connection, but no voice - either in or out. I can call on SIP from A to B (and from B to A). Do it all the time. Asterisk A receives SIP calls from Junction and Teliax. CLI on A looks right: == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 ==

Hi, I am running a ASTERISK BOX behind a firewall. It is at DMZ . Now I want to connect to my ASTERISK BOX from Internet. So I want to DNAT. How can I do it? Pls assume that ip address that connects to Internet on firewall is 1.2.3.4and is attached to eth0. And ASTERISK BOX is 192.168.101.23 Then, What is the rule (PREROUTING) for it? What is the port to DNAT? I think udp 5060. So I have

Hi, still trying to understand one thing. I would definitely like to tell iptables to accept all packets coming from remote vpn only if they hit the $VIRTUALVPNINTERFACE. I tried -o ipsec0 but this is not working, looks like ipsec0 device doesn't exist or it is not recognized. I red on the Openswan users list, that Linux kernel 2.6 native ipsec don't create ipsec* interface (if I am

Hi all, This is my first post to this list. I hope someone can help me, I have been getting grey hairs trying to make this work! I have a bridge setup on a debian sarge box. The bridge is called br0 and sits between my cable modem and a non-name brand router/switch: [cable modem]----[eth1]---[br0]----[eth2]-----[no-name brand router] I have squid setup on the linux box and it works, I have

Easy question here: I have a test network that looks like this (apologies for my lack of ascii skills): [hostc]---------------[Firewall]192.168.42.1 (EXTIF: eth0) /10.0.0.1 (INTIF: eth1) 192.168.42.10 (wan) |(lan) | +-------------[hosta] 10.0.0.10 (port 4242) | +-------------[hostb]

> Seems like your firewall could redirect to a different port that doesn't > offer starttls. Yes, of course. But that would require multiple ports, making the client configuration cumbersome and error-prone. Michael

I have a connection to the Internet (on eth1), and over this I also have a PPTP tunnel set up (on ppp0). Temporarily I use the (slower) PPTP tunnel for everything, but I really just have to use it for some specific purposes, which are distinguishable by port. So, I want to direct only some specific ports to ppp0, using eth1 for the rest. I have tried following the instructions on

Hi all, I´m running a server that frecuently needs to open a pptp session with a remote server outside my Company. This server is running behind a Shorewall firewall and I don´t find information in Shorewall web page because there is no information in the link http://www.shorewall.net/PPTP.htm#ClientsBehind Nowadays I can connect this server with the remote one but te session is closed after

On 2/19/07, Salatiel Filho <salatiel.filho@gmail.com> wrote: > Well , thanks to imq all my client machines are now shaped and > everything is great ... > But now i have a doubt , is there a way to shape the traffic that goes > to the route [doing a wget from the router for example ]? > > > I have a PREROUTING IMQ0 and a POSTROUTING IMQ1 , everything is > working like

http://bugzilla.netfilter.org/show_bug.cgi?id=782 Summary: -j LOG --log-prefix handling broken Product: iptables Version: CVS (please indicate timestamp) Platform: x86_64 OS/Version: All Status: NEW Severity: normal Priority: P5 Component: iptables-restore AssignedTo: netfilter-buglog at

Hi there. I have followed some documents found here and there, but do not have already success implementing a script using iptables and iproute. What I need is to send all traffic trough an ADSL line, but mail trough an expensive and slow DS0. The mail server lies on the PC acting also as firewall. I include the script. When using that I get some error messages (I found that the flush command

Hi, this is a followup to "Problem with HTB and ceil", the problem with the ceiling has been resolved, thanks to the memebers on this m/g. Now I have the problem that packets get into the correct classe with the correct marks but the prios are not respected. I have 4 different classes: 1. voip class / prio 0 / mark 100 / voip traffic 2. ACK class / prio 1 / mark 200 / ACK packets to