similar to: Convert raidz

I skimmed the archives and found a thread from July earlier this year about RAIDZ expansion. Not adding more RAIDZ stripes to a pool, but adding more drives to the stripe itself. I''m wondering if an RFE has been submitted for this and if any progress has been made, or is expected? I find myself out of space on my current RAID5 setup and would love to flip over to a ZFS raidz2 solution

Hi, I had a plan to set up a zfs pool with different raid levels but I ran into an issue based on some testing I''ve done in a VM. I have 3x 750 GB hard drives and 2x 320 GB hard drives available, and I want to set up a RAIDZ for the 750 GB and mirror for the 320 GB and add it all to the same pool. I tested detaching a drive and it seems to seriously mess up the entire pool and I

So, I took four 1.5TB drives and made RAIDZ, RAIDZ1 and RAIDZ2 pools. The sizes for the pools were 5.3TB, 4.0TB, and 2.67TB respectively. The man page for RAIDZ states that "The raidz vdev type is an alias for raidz1." So why was there a difference between the sizes for RAIDZ and RAIDZ1? Shouldn''t the size be the same for "zpool create raidz ..." and "zpool

Hi, I do have a disk array that is providing striped LUNs to my Solaris box. Hence I''d like to simply concat those LUNs without adding another layer of striping. Is this possibile with ZFS? As far as I understood, if I use zpool create myPool lun-1 lun-2 ... lun-n I will get a RAID0 striping where each data block is split across all "n" LUNs. If that''s

Hi there, i''m building a small NAS with 5x1TB Disks. The disks contains at the moment some data, ntfs as the fs and aren''t a raid. Now my im wondering if its possible to add the parity later. So that i add step by step one disk to the pool. And when i add the last disk, i enable the parity. (i have only one another 1 tb disk to backup the files) Thank you for you replies and

Apologies for the blank message (if it came through). I have heard here and there that there might be in development a plan to make it such that a raid-z can grow its "raid-z''ness" to accommodate a new disk added to it. Example: I have 4Disks in a raid-z[12] configuration. I am uncomfortably low on space, and would like to add a 5th disk. The idea is to pop in disk 5 and have

Hi all Having managed ZFS for about two years, I want to post a wishlist. INCLUDED IN ZFS - Mirror existing single-drive filesystem, as in ''zfs attach'' - RAIDz-stuff - single and hopefully multiple-parity RAID configuration with block-level checksumming - Background scrub/fsck - Pool-like management with multiple RAIDs/mirrors (VDEVs) - Autogrow as in ZFS autoexpand NOT

Hello, i have an 8 port sata-controller and i don''t want to spend the money for 8 x 750 GB Sata Disks right now. I''m thinking about an optimal way of building a growing raidz-pool without loosing any data. As far as i know there are two ways to achieve this: - Adding 750 GB Disks from time to time. But this would lead to multiple groups with multiple redundancy/parity disks. I

Hi, for zfs raidz1, I know for random io, iops of a raidz1 vdev eqaul to one physical disk iops, since raidz1 is like raid5 , so is raid5 has same performance like raidz1? ie. random iops equal to one physical disk''s ipos. Regards Victor -- This message posted from opensolaris.org

Ref: http://blogs.sun.com/timf/entry/zfs_bootable_datasets_happily_rumbling Ref: http://mediacast.sun.com/share/timf/zfs-actual-root-install.sh This is my errata for Tim Foster''s zfs root install script: 1/ Correct mode for /tmp should be 1777. 2/ The zfs boot install should allow you to have /usr on a separate zpool: a/ We need to create /zfsroot/usr/lib in the root partition and

Hi All, I am looking at ZFS and I get that they call it RAIDZ which is similar to RAID 5, but what about RAID 10? Isn''t a RAID 10 setup better for data protection? So if I have 8 x 1.5tb drives, wouldn''t I: - mirror drive 1 and 5 - mirror drive 2 and 6 - mirror drive 3 and 7 - mirror drive 4 and 8 Then stripe 1,2,3,4 Then stripe 5,6,7,8 How does one do this with ZFS?

Hi all, Sorry for the newbie question, but I''ve looked at the docs and haven''t been able to find an answer for this. I''m working with a system where the pool has already been configured and want to determine what the configuration is. I had thought that''d be with zpool status -v <poolname>, but it doesn''t seem to agree with the

In my testing, I''ve found the following error: zpool status -v pool: local state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: http://www.sun.com/msg/ZFS-8000-8A scrub: none requested

Hi All, I had a slice with zfs file system which I want to mirror, I followed the procedure mentioned in the amin guide I am getting this error. Can you tell me what I did wrong? root # zpool list NAME SIZE USED AVAIL CAP HEALTH ALTROOT export 254G 230K 254G 0% ONLINE - root # echo |format Searching for disks...done

I''d like to replace/upgrade two 500GB disks in RaidZ2 vdev with 1TB disks, but I have some preliminary questions/concerns before trying ''zfs replace dpool ?'' Will ZFS permit this replacement? Will ZFS use the extra space in a heterogeneous RaidZ2 vdev, or is the size limited by the smallest disk in the vdev? Thanks in advance, Vizzini The system is currently running

Hello everyone, As one of the steps of improving my ZFS home fileserver (snv_134) I wanted to replace a 1TB disk with a newer one of the same vendor/model/size because this new one has 64MB cache vs. 16MB in the previous one. The removed disk will be use for backups, so I thought it''s better off to have a 64MB cache disk in the on-line pool than in the backup set sitting off-line all

I was recently evaluating much the same question but with out only a single pool and sizing my disks equally. I only need about 500GB of usable space and so I was considering the value of 4x 250GB SATA Drives versus 5x 160GB SATA drives. I had intended to use an AMS 5 disk in 3 5.25" bay hot-swap backplane. http://www.american-media.com/product/backplane/sata300/sata300.html I priced

New server build with Solaris-10 u5/08, on a SunFire t5220, and this is our first rollout of ZFS and Zpools. Have 8 disks, boot disk is hardware mirrored (c1t0d0 + c1t1d0) Created Zpool my_pool as RaidZ using 5 disks + 1 spare: c1t2d0, c1t3d0, c1t4d0, c1t5d0, c1t6d0, and spare c1t7d0 I am working on alerting & recovery plans for disks failures in the zpool. As a test, I have pulled disk

Hi all, I have a 5 drive RAIDZ volume with data that I''d like to recover. The long story runs roughly: 1) The volume was running fine under FreeBSD on motherboard SATA controllers. 2) Two drives were moved to a HP P411 SAS/SATA controller 3) I *think* the HP controllers wrote some volume information to the end of each disk (hence no more ZFS labels 2,3) 4) In its "auto

1. I have a 4x18GB drive setup as RAIDZ. Now when thinking about it in terms of RAID5 I would expect to get (4-1)x18 worth of drive space, but DF -h shows 4x18. Is this a bug or do I not understand? 2. Once again thinking in RAID5 terms if I have 4X18GB and 12X9GB drives and I want to make a RAIDZ of all of them I would expect the 18GB to be treated at 9GB so the RAIDZ would be 16X9GB. Is