similar to: Monitoring a remote UPS

Hello again! Your suggestions the other day did work so thank you! I do have one more question for you guys though. APC AP9630 SNMP monitoring card is listed in the HCL and next to it there is privProtocol = AES. Does this mean only AES works or AES doesn't work? I saw the archived mailing lists were it looked like it only worked with the AES protocol, though in my set up it works with

Hello, we try to use Network UPS tools to monitor a network connected Eaton 93PS UPS. It basically works but we get frequent "Data is stale - check driver" warnings with a "data is no longer stale" shortly after in the log. We tried both snmp-ups and netxml-ups driver and both raise the same error. If have captured the communication between nut and UPS but all

I also operate an HP T1500 G3 which it's an Eaton made UPS. Connected on usb i get frequent communication errors and data aquisition stopped. Mine has a serial connection, also. Operating via serial has no trouble. Maybe it's something related to usb setting in bios, i.e. Legacy mode, speed setting, etc. However on serial mode looks like the eaton or hoe power protector software does not

On Mar 30, 2014, at 10:39 PM, Shade Alabsa wrote: > Hello again! Your suggestions the other day did work so thank you! I do have one more question for you guys though. APC AP9630 SNMP monitoring card is listed in the HCL and next to it there is privProtocol = AES. Does this mean only AES works or AES doesn't work? I saw the archived mailing lists were it looked like it only worked with the

I am trying to compile speexclient.c. I downloaded all the files to ~/speex- 1.2beta1/include When I call ./compile.sh I get the following errors, speexclient.c: In function 'main': speexclient.c:164: error: 'SPEEX_PREPROCESS_SET_ECHO_STATE' undeclared (first use in this function) speexclient.c:164: error: (Each undeclared identifier is reported only once speexclient.c:164:

Hi All, I would like to communicate speech over a network compressed using speex. However, I do not want to communicate a whole Ogg-formatted file. I am interested in only the speech frames. I invoked: speexenc input-file-name - > raw-speech This, I am thinking gives the speech frames only. To play this back at the receiving end, do I need to format it into Ogg formatted file before I can

I have a Symmetra LX 16000 UPS with a Network Management Card (Schneider Electric, I think).?? Can NUT be configured to report from this unit and shutdown hosts based upon messages from this unit?

Hi all, I've been trying to build NUT (latest release source) on a pretty "standard" CentOS (RHEL style) linux box, to monitor an APC Symmetra UPS Unit which powers our server room and broadcasts information via SNMP to appropriate clients. I am having some trouble even encouraging NUT to build with snmp support, which doesn't seem to happen by default. I am curious if anyone

Hi All! Just an update! The snmp driver seems quite happy with an APC AP9618 managment card in an APC Smart-UPS RT 5000 XL UPS. I have an APC AP9630 to test in the near future so will give and update on that one too! Cheers Ang -- Angela Williams angierfw at gmail dot com Linux/Networking Hacker Blog http://angierfw.wordpress.com Smile! Jesus Loves You!

I've contacted Riello and they told me that the NetMan 204 is the new version of the Netman Plus 102 and is indeed compatible with NUT. I don't know how to update the Hardware compatibility list page, but the 204 should be added to the compatible ones. Niccolo' Il 2022-06-17 12:02 Niccol? Belli via Nut-upsuser ha scritto: > Hi, > I'm looking for a small 230V Line

I've contacted Riello and they told me that the NetMan 204 is the new version of the Netman Plus 102 and is indeed compatible with NUT. I don't know how to update the Hardware compatibility list page, but the 204 should be added to the compatible ones. Niccolo' Il 2022-06-17 12:02 Niccol? Belli via Nut-upsuser ha scritto: > Hi, > I'm looking for a small 230V Line

Hi, I'm from Argentina, this model isn't in the hardware compatibility list: Lyonn ULT-2000 MKR http://www.solytec.com.ar/p03_ups_lyonn_ult1000.php http://www.solytec.com.ar/p03_ups_lyonn_ultrack.php How can I do to control via SNMP? I have an AgentMini hardware. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello All ! Recently I have upgraded NUT to 2.4.1, and now I can't monitor old IMV LanPro S3 UPS with old SNMP board. Previously it is monitored OK, but now snmp-ups refuses to start: [root at perforce /usr/local/etc/nut]# /usr/local/libexec/nut/snmp-ups -a lanproups -DDDDDDD Network UPS Tools - Generic SNMP UPS driver 0.44 (2.4.1) debug level is '7' SNMP UPS driver : entering

Hello, Digium does not provide snmp support to monitor their cards ! Anybody has tried Sangoma product A104 Quad T1/E1 or others ? Regards harry ___________________________________________________________________________ Yahoo! Mail r?invente le mail ! D?couvrez le nouveau Yahoo! Mail et son interface r?volutionnaire. http://fr.mail.yahoo.com

Greetings all, I''ve been searching high and low for any inkling of how people are monitoring classes for long term usage data. I''m thinking something along a script to collect the data for mrtg or perhaps even an snmp module that would present them as interfaces to be polled....has anyone done any work in this area? John Dunning Assistant Director Net & Tech Svcs Wayne

Hello Sir/Madam, I have a question related to UPS monitoring by SNMP cards via NUT(Network UPS Tools). We have a few SNMP Cards (MEGATEK) that connecting to a number of UPS`s. We need a centralized program to monitoring of our UPS`s. We want to know that, NUT can help us? Operating System: Windows or Linux SNMP Card type: Netagent model for MEGATEK company (www.megatec.com.tw). Yours

Hi Everyone, I have been searching the web and I don't know if SNMP is just that complex to setup or that not many people use SNMP to monitor Asterisk but the information is scattered all over. I have got to the point to configure SNMP with Asterisk and then it's all confusing from there on to actually see the graphs in Cacti. I would appreciate it if you can post your steps or point me

Thanks for this informations. Do you know where I can find the icd-snmp package for a redhat 9 distri? I can't find it. Thanks. Message: 6 Date: Fri, 09 Jul 2004 15:45:57 +0200 From: Andrea Fino <af@faino.org> To: asterisk-users@lists.digium.com Subject: Re: [Asterisk-Users] SNMP Monitoring Reply-To: asterisk-users@lists.digium.com Holger Schurig wrote: >>You could try

Hi, I maintain several dom0 hosts, and I would like to monitor the following with Cacti: * the overall hypervisor CPU usage * available hypervisor memory (e.g. memory that can be allocated to new domUs) and maybe: * domU CPU usage But the latter is not as important to me right now. Anyone have any pointers on how I might do this? My knowledge of Cacti is very basic. Basically: has anyone

Hi All, I've been reading up on 1.4 snmp integration. When I try and compile asterisk with a -with-netsnmp option it complains about net-snmp installation being broken. However, the net-snmp-devel rpm is installed, and snmpd on the machine runs fine. Anyone have a guide for the pre-requisites needed ? Cheers, Adrian -------------- next part -------------- An HTML attachment