Displaying 20 results from an estimated 100 matches similar to: "odd behavior from zpool replace."
2009 Jan 21
8
cifs perfomance
Hello!
I''am setup zfs / cifs home storage server, end now have low performance with play movie stored on this zfs from windows client. server hardware is not new , but n windows it perfomance was normal.
CPU is AMD Athlon Burton Thunderbird 2500, runing on 1,7GHz, 1024 RAM and storage:
usb c4t0d0 ST332062-0A-3.AA-298.09GB /pci at 0,0/pci1458,5004 at 2,2/cdrom at 1/disk at
2007 Oct 10
0
Areca 1100 SATA Raid Controller in JBOD mode Hangs on zfs root creation.
Just as I create a ZFS pool and copy the root partition to it.... the performance seems to be really good then suddenly the system hangs all my sesssions and displays on the console:
Oct 10 00:23:28 sunrise arcmsr: WARNING: arcmsr0: dma map got ''no resources''
Oct 10 00:23:28 sunrise arcmsr: WARNING: arcmsr0: dma allocate fail
Oct 10 00:23:28 sunrise arcmsr: WARNING: arcmsr0:
2008 Mar 11
1
Question on SATA DVD using centos 5.1
On my machine I have
SATA0: HD
SATA1: HD these two drives are set as RAID1
SATA2: HD extra
SATA3: DVD
SATA4: external USB disk
Snip from dmesg shows the ATAPI device being detected.
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe400 irq 10
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe408 irq 10
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: PIONEER BD-ROM
2009 Dec 29
2
ext3 partition size
Hi all,
I am running fedora 11 with kernel 2.6.30.9-102.fc11.x86_64 #1 SMP
Fri Dec 4 00:18:53 EST 2009 x86_64 x86_64 x86_64 GNU/Linux. I am
noticing a partition on my drive is reporting incorrect size with "df",
the partition is ext3 size 204GB with about 79GB actual usage, the "df"
result show the partition size to be 111GB, 93GB is missing. Please
advice on what
2009 Mar 24
1
Ext3 - Frequent read-only FS issues
Hi all,
I have a bunch of mail servers running postfix (external smtp),
qmail (LDA) and courier IMAP/POP. Frequently, Ext3 filesystem goes
into read-only mode forcing recovery using fsck.
Below are the errors we have seen so far on these systems and those
systems config. The ext3 errors are common in many cases.
1.
Red Hat Enterprise Linux Server release 5.2 (Tikanga)
2.6.18-92.1.10.el5
2007 Nov 26
4
Filesystem for Maildir
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
<font size="-1"><font face="Verdana">Hi all,<br>
<br>
In last year, i had made some research and benchmarks based on CentOS 4
to know which filesystem is better for
2007 Jun 13
5
drive displayed multiple times
So I just imported an old zpool onto this new system. The problem would be one drive (c4d0) is showing up twice. First it''s displayed as ONLINE, then it''s displayed as "UNAVAIL". This is obviously causing a problem as the zpool now thinks it''s in a degraded state, even though all drives are there, and all are online.
This pool should have 7 drives total,
2009 Aug 19
0
compiz Digest, Vol 42, Issue 3
I see no problem with your nvidia temps But, i have seen
this exact behavior when 'indirect rendering' is enabled.
On Wed, Aug 19, 2009 at 2:00 PM, <compiz-request at lists.freedesktop.org>wrote:
> Send compiz mailing list submissions to
> compiz at lists.freedesktop.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
2010 May 07
0
confused about zpool import -f and export
Hi, all,
I think I''m missing a concept with import and export. I''m working on installing a Nexenta b134 system under Xen, and I have to run the installer under hvm mode, then I''m trying to get it back up under pv mode. In that process the controller names change, and that''s where I''m getting tripped up.
I do a successful install, then I boot OK,
2009 Jul 25
1
OpenSolaris 2009.06 - ZFS Install Issue
I''ve installed Open Solaris 2009.06 on a machine with 5 identical 1TB wd green drives to create a ZFS nas. The intended install is one drive dedicated to the OS and the remaining 4 drives in a raidz1 configuration. The install is working fine, but creating the raidz1 pool and rebooting is causing the machine report "Cannot find active partition" upon reboot. Below is command
2008 Sep 05
0
raidz pool metadata corrupted nexanta-core->freenas 0.7->nexanta-core
I made a bad judgment and now my raidz pool is corrupted. I have a
raidz pool running on Opensolaris b85. I wanted to try out freenas 0.7
and tried to add my pool to freenas.
After adding the zfs disk,
vdev and pool. I decided to back out and went back to opensolaris. Now
my raidz pool will not mount and got the following errors. Hope someone
expert can help me recover from this error.
2009 Jul 10
1
SMART problems with AOC-SAT2-MV8 / marvell88sx driver
I''ve been trying to get either smartctl or sg3_utils to report properly.
They both have the same low-level problems which leads me to suspect
either I''m doing something wrong OR there is a problem in the
marvell88sx / sd / SATA etc framework.
I can access drive name/serial number of all drives on the SAT2 card
and the temperature is returned from the IE log page on my two
2008 Jan 10
2
Assistance needed expanding RAIDZ with larger drives
Hi all,
Please can you help with my ZFS troubles:
I currently have 3 x 400 GB Seagate NL35''s and a 500 GB Samsung Spinpoint in a RAIDZ array that I wish to expand by systematically replacing each drive with a 750 GB Western Digital Caviar.
After failing miserably, I''d like to start from scratch again if possible. When I last tried, the replace command hung for an age, network
2006 May 09
3
Possible corruption after disk hiccups...
I''m not sure exactly what happened with my box here, but something caused a hiccup on multiple sata disks...
May 9 16:40:33 sol scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci10de,5c at 9/pci-ide at a/ide at 0 (ata6):
May 9 16:47:43 sol scsi: [ID 107833 kern.warning] WARNING: /pci at 0,0/pci-ide at 7/ide at 1 (ata3):
May 9 16:47:43 sol timeout: abort request, target=0
2006 Oct 31
0
4855218 sparc: Need EFI label support on IDE
Author: lclee
Repository: /hg/zfs-crypto/gate
Revision: c80632cae25a4c92285f9e6434b64aa3f3aa6b79
Log message:
4855218 sparc: Need EFI label support on IDE
6275431 x86: Need EFI label support on IDE
6340778 cmlb: common disk label code
6326547 format: converting EFI to VTOC, fdisk info is taken from a random disk
6335611 format: Need to warn users that data will be lost when converting to and from
2009 Jan 13
6
mirror rpool
Hi
Host: VirtualBox 2.1.0 (WinXP SP3)
Guest: OSol 5.11snv_101b
IDE Primary Master: 10 GB, rpool
IDE Primary Slave: 10 GB, empty
format output:
AVAILABLE DISK SELECTIONS:
0. c3d0 <DEFAULT cyl 1302 alt 2 hd 255 sec 63>
/pci0,0/pci-ide at 1,1/ide at 0/cmdk at 0,0
1. c3d1 <drive unknown>
/pci0,0/pci-ide at 1,1/ide at 0/cmdk at 1,0
# ls
2007 Nov 16
0
ZFS mirror and sun STK 2540 FC array
Hi all,
we have just bought a sun X2200M2 (4GB / 2 opteron 2214 / 2 disks 250GB
SATA2, solaris 10 update 4)
and a sun STK 2540 FC array (8 disks SAS 146 GB, 1 raid controller).
The server is attached to the array with a single 4 Gb Fibre Channel link.
I want to make a mirror using ZFS with this array.
I have created 2 volumes on the array
in RAID0 (stripe of 128 KB) presented to the host
2010 Dec 15
0
btrfsck says snapshots have errors
btrfs 0.19
Ubuntu 10.10
Linux linux 2.6.35-23-generic #41-Ubuntu SMP Wed Nov 24 11:55:36 UTC 2010 x86_64 GNU/Linux
I create a new btrfs on a 200GB disk with one partition.
I mount the partition.
I create a snapshot of that partition.
I unmount the partition.
I run btrfsck and it says I have an "unresolved ref" error.
If I create two snaps, I get three errors.
If I create three snaps, I
2010 Oct 28
0
RAID0 limiting disk utilization
I noticed that if I have single-device allocation for data in a
multi-device btrfs filesystem, a balance operation will convert the data
to RAID0. This is true even if ''-d single'' is specified explicitly when
creating the filesystem. Then it wants to continue using RAID0 for
future data allocations, and I run out of space once there''s no longer
two drives with space
2009 Feb 03
1
Cannot Mirror RPOOL, Can''t Label Disk to SMI
Dear ZFS experts,
I have 2 SATA 500 GB Hard Drive on my Dual Core PC
I have installed OpenSolaris 2008.11 using Live CD I got from Sun Tech Days in Singapore
Now, using all the guidelines I got here at Indiana Discussion, I can''t attach my second drive to rpool to make them mirror
Initially I was playing around with similar configuration in VirtualBox, and it does not succeed. Finally