similar to: 4.4/64-bit Supermicro/ Nvidia Sata RAID Driver

Hello, We have recently purchased two Supermicro servers, AS-1021M-T2RB (http://www.supermicro.com/Aplus/system/1U/1021/AS-1021M-T2RV.cfm), and have built them both with CentOS 5 operating system. They are identical, apart from the manufacturer of the disk drives. Kernel is: Linux version 2.6.18-8.1.6.el5 (mockbuild at builder6.centos.org) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP

I am trying to build a file server with 1 x 80 GB main drive and 4 x 500 GB SATA drives in RAID in a Supermicro 3U server. I found out the hard way that Centos 4.2 does not have a driver for the onboard Marvell H2 controller the drives are connected to. Supermicro techs sent me aar81xx.rhel4qu2.i686.img as an img file. I used dd to copy to a floppy and dd confirmed successful write. I booted

Hello: When I installed CentOS 4.4 (from the ServerCD) on my server, I told it not to install a firewall and I disabled SELinux. The server is a SuperMicro 5015P-TR. I set up my own /etc/init.d/firewall with these rules: #!/bin/sh # Firewall script # # Source function library . /etc/init.d/functions RETVAL=0 # Some definitions (Will need to change ETH0_IP to match your configuration)

I have a weird situation with a new installation of CentOS 5.4 x64, on a SuperMicro X7SBI server. The server has a <a href=" http://www.supermicro.com/products/motherboard/Xeon3000/3210/X7SBi.cfm" target="_new">SuperMicro X7SBi motherboard</a>, board ATI ES1000 and Core2Quad Q9505 CPU. The kernel is When I login to the console, using a "17 CRT monitor

I'm wondering if anyone has had any good/bad/indifferent experiences with Supermicro P4SGE P4 FCPGA motherboards and Digium cards? I'm looking to use this MB in an E100P E1 card solution, and I haven't had the ability to test with that configuration before I ship a system overseas (since I don't have an E1 to plug into it, it's hard for me to test, and I don't have

Guys. Anybody using supermicro mobos and chassis with TDM cards? I would like to know which models are you using (mobos and chassis and also CPUs) and how many TDM cards have you been able to put in without having IRQ issues like in other cases. Ive read supermicro servers play nice with asterisk but it is always good to ask I guess. Thx! AK

Hello, Digium support kindly proposed to ship a TE120P card to help resolve the issue. I plugged in the card, and introduced the loopback plug. I cleared the red alarm for a while and then i started seeing alarm switching from Yel/Recovering to Blue/Rec with a lot of IRQ Misses. I call Digium that assisted us, and we noticed IRQ sharing with the VGA adapter and the Ethernet port. I changed

Eve.8ryone, I have had a SuperMicro machine running Centos 5.8 that had been progressively updated with yum-cron from a 5.0 CD install. I upgraded the SuperMicro with more memory, switched out the CD with a DVD and tried to boot to the Centos x64 6.2 dvd. My plan was to test the memory before I added the hard drives, but I could not I could not get the machine to boot from the disc. I also

I've been having an extremely hard time using the on board SATA controller on my nvidia based board. I have two 160gig Maxtor SATA drives attached to the on board controller, setup as software raid0. The problem is the array is extremely unreliable, where I'm getting constant I/O errors like: sd 0:0:0:0: SCSI error: return code = 0x00040000 end_request: I/O error, dev sda, sector

Hello, I am trying to install FreeBSD 9.2-RC4 on Supermicro server with Intel Xeon E3-1240 v3 processor. The processor has 4 cores with 8 threads. However only one core is detected (with two threads): FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 The motherboard is Supermicro X10SLM-F. All

Hi all, I''m getting a very strange problem with a recent OpenSolaris b134 install. System is: Supermicro X5DP8-G2 BIOS 1.6a 2x Supermicro AOC-SAT2-MV8 1.0b 11 Seagate Barracuda 1TB ES.2 ST31000340NS drives If I have any of the 11 1TB Seagate drives plugged into the controller, the AOC-SAT2-MV8 BIOS appears to detect them just fine, but I get the following problems: 1. Grub takes a

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 1) Has anyone been able to get their AIC-9410 controller recognized in CentOS 5.3? I'm working with a Supermicro X7DBR-3 motherboard. It has 2 "ICH Raid Codebase" options in the Bios (Intel and Adaptec); neither of which seem to change Linux's behavior. The interesting part though, choosing either Adaptec or Intel, then performing

Does anyone have a supermicro 942i server chassis? I'm trying to figure out if it has a true nine 5.25" drive bays, or if the one occupied by the 3.5" caddy is special / crippled. What I want to do is install three of the supermicro 5x3 hot swap backplanes and I'm gunshy about buying one site unseen. Thanks! Gordon

I am having problems with silent data corruption on (some) drives connected to an MCP55 SATA controller. I have two servers, both running RELENG_7_0/amd64. One has the 570 Ultra chipset, the other has 570 SLI. Both chipsets have the MCP55 SATA controller. The server with 570 Ultra chipset has a bunch of older 250GB SATA-150 drives hooked up to the MCP55 controller and it is working just fine.

hi, i have new supermicro server (centos5, 2.6.30.9/2.6.27.34/2.6.18-distro kernels, wanpipe 3.5.6) card is: 1 . AFT-A101-SH : SLOT=4 : BUS=8 : IRQ=11 : CPU=A : PORT=1 : HWEC=32 : V=36 and i have this in log irq 17: nobody cared (try booting with the "irqpoll" option) Pid: 0, comm: swapper Not tainted 2.6.30.9rh #1 Call Trace: [<c0465b07>] __report_bad_irq+0x27/0x90

I've been handed a Supermicro system that is using the Intel? H6300ESB Serial ATA Controller (Supermicro P4SCI motherboard). When I install CentOS5, everything seems to work OK, but it has absolutely horrid disk performance. Upon further inspection, it seems that the SATA disks are being treated as legacy IDE devices using PIO. Gah.... Has anyone else had this problem? I recall having

Hello folks, I'm having a difficult time trying to figure out why the CPU cooling fans run at full speed on my Supermicro X8DAL-3 motherboard. There doesn't seem to be any variable speed (the fans are PWM compatible) ... they either idle at almost nothing, or suddenly burst into a high-pitched scream that gets my ears bleeding after a few seconds. Once they jump to warp-10, they

Should it be possible to hot-swap SATA drives with Centos5? It doesn't seem to work on my system. Removing an unmounted drive locked the system up, and leaving one out at bootup makes the devices change names and keeps grub from finding /boot on a scsi drive that is shifted up. -- Les Mikesell lesmikesell at gmail.com

Hi All, I checked the on-line manual for the Supermicro C2SBC-Q (Intel Q35 chipset) and it has VT-d support. Wanted to see if anyone has worked with this particular board with Xen and VT-d before I "pull the trigger" on purchasing it for a lab. Thanks! -- Daniel Kao Übermind, Inc. Seattle, WA, U.S.A. _______________________________________________ Xen-users mailing list

Hi, Is anyone here using the SuperMicro SuperServer 6014P-8R with Asterisk? I'm especially interested if you've used it with a TE405P or TE410P. Cheers Tony -- Tony Mountifield Work: tony@softins.co.uk - http://www.softins.co.uk Play: tony@mountifield.org - http://tony.mountifield.org