similar to: Initiator for iscsi?

I have a PRI connected to a traditional PBX using NI-2 and a typical config (further below). When I call from a SIP/IAX phone to an extension on the PBX, only the number makes it through. If I plug that same port on the PBX to a carrier the PBX presents both name and number. Hints or pokes to relevant chapters in documentation? My config is essentially like one found here:

Hi. Anyone using CentOS 4.2 iscsi-initiator-utils-4.0.3.0-2 in a production setup? I'm planning to do so shortly, and would like to hear about any experiences (good/bad) or recommendations. The target is going to be a Dell AX100i. Br, Morten

Hi, I could not find any option to set iSCSI initiator iqn while using guestfish, although the underlying qemu command has this option. It appears that each time guestfish tries to connect to iSCSI LUN, a randomly generated initiator iqn is being used. This is preventing guestfish to connect to the iSCSI target in our environment as the target allows incoming connection based on the preconfigured

Hello, I?m using ZFS to export some iscsi targets for the virtual box iscsi initiator. It works ok if I try to install the guest OS manually. However, I?d like to be able to import my already prepared guest os vdi images into the iscsi devices but I can?t figure out how to do it. Each time I tried, I cannot boot. It only works if I save the manually installed guest os and re-instate the same

Hi I have a system (S) that has a PSTN gateway to accept incoming calls and setup outgoing calls from/to Telco network. In the other hand I have a distant Asterisk box (A) that I would like to connect to (S) using the PRI interface. I understand that the proper way is to order to my Telco two PRI lines one for (S) and another for (A), and configure (S) and (A) to call each other numbers when

I just updated one of my virtual hosts to 5.6 and on rebooted I spotted an error about iscsi. Which surprised me, since I don't use iscsi. Yet there it is... % rpm -qf /etc/init.d/iscsi iscsi-initiator-utils-6.2.0.872-6.el5 And they're configured to start iscsi 0:off 1:off 2:off 3:on 4:on 5:on 6:off iscsid 0:off 1:off 2:off 3:on 4:on

I am trying to install Oracle RAC in a two node cluster for testing purposes, so performance is not something that concerns me. I just want to go through the process all the way to creating a database. I have all the prerequisites except the shared storage and thought I'd give this a try. I'm running: - CentOS 5.3 kernel 2.6.18-164.el5 - iscsitarget-1.4.18-1 -

Hi, regarding to this problem I made some progress. After going back to Jessie, and samba 4.2.14 the following configuration works. Storage Client Wheezy 7.11) /etc/exports on nfs-server (version 1.2.6-4): /data/data 141.244.123.4(rw,sec=sys,async,no_root_squash,subtree_check) DC Version nfs-client: 1.2.8-9 Samba: Samba version 4.2.14-Debian profiles share on samba DC [profiles] # roaming

This add an iscsi initiator name setup option to the main menu in ovirt-config-setup and can also be accessed via ovirt-config-iscsi. Also accepts AUTO setup by running ovirt-config-iscsi AUTO and generates a random name as before --- Makefile.am | 1 + ovirt-node.spec.in | 3 ++ scripts/ovirt-config-boot | 4 --- scripts/ovirt-config-iscsi | 56

I'm using R 1.3.1 on a Windows NT 4.0 machine. As you might guess my machine crashes on me from time to time :-| So far, forcing a reboot via the Taskmanager has worked reasonably well: any open R session would enquire politely whether to save, and do so if requested. This time, it has not worked out. I get a 'Fatal Error: unable to restore saved data in .RData' message and R

Hi list, CentOS 4.4 connecting to Promise M500i iSCSI disk array. 2/4 servers connect fine with iscsi-initiator-utils-4.0.3.0-4. The other 2 servers have this in dmesg: SCSI device sdb: 1 512-byte hdwr sectors (0 MB) sdb: asking for cache data failed sdb: assuming drive cache: write through SCSI device sdb: 1 512-byte hdwr sectors (0 MB) sdb: asking for cache data failed sdb: assuming drive

CentOS Errata and Bugfix Advisory 2016:1284 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1284.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 8e44f277f695473fd93e4e46f507973bb20c14a3d690493b9d006969831f5a5b iscsi-initiator-utils-6.2.0.873-33.el7_2.1.i686.rpm

CentOS Errata and Bugfix Advisory 2016:1530 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1530.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) x86_64: 684e67a738b7dce51fd91736f404ec13e2816f48d8474478ac10336b93c03a0e iscsi-initiator-utils-6.2.0.873-33.el7_2.2.i686.rpm

I've setup the CentOS version of the RH Cluster Service on a pair of centos 4.4 i386 test boxes... wanting to do high availabilty stuff. its working, I've added a virtual IP and a fiberchannel hosted e3fs file system thhat either can mount, if I manually crash or reboot one, this IP and FS mount on the other, awesome. the servers are connected to the storage via a QLogic SANbox

CentOS Errata and Bugfix Advisory 2016:1999 Upstream details at : https://rhn.redhat.com/errata/RHBA-2016-1999.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 99e4b99cf132eac84807aea4eaaa2fb498b390a138ec89bc6a6342e3ae55546b iscsi-initiator-utils-6.2.0.873-22.el6_8.i686.rpm

CentOS Errata and Bugfix Advisory 2017:1725 Upstream details at : https://rhn.redhat.com/errata/RHBA-2017-1725.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: bb20f5019d41d5a7e53b75e8955288aa082ec9c50f924e762ccbe8a96623154b iscsi-initiator-utils-6.2.0.873-27.el6_9.i686.rpm

CentOS Errata and Bugfix Advisory 2013:0438 Upstream details at : https://rhn.redhat.com/errata/RHBA-2013-0438.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: 8127ade8d17da59c23de745f65003917fcada41924f969c43969804ae4896e5c iscsi-initiator-utils-6.2.0.873-2.el6.i686.rpm

CentOS Errata and Security Advisory 2007:0497 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2007-0497.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: ee92f792a8d56ea4db6dde9aad05c452 iscsi-initiator-utils-6.2.0.742-0.6.el5.i386.rpm Source: 9b7a480e0161eb038fef4da33eb3fd15

CentOS Errata and Security Advisory 2007:0497 Moderate Upstream details at : https://rhn.redhat.com/errata/RHSA-2007-0497.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) x86_64: ff04b4bfd78d2d38c8bf88f712f2997f iscsi-initiator-utils-6.2.0.742-0.6.el5.x86_64.rpm Source: 9b7a480e0161eb038fef4da33eb3fd15

CentOS Errata and Bugfix Advisory 2009:1099 Upstream details at : https://rhn.redhat.com/errata/RHBA-2009-1099.html The following updated files have been uploaded and are currently syncing to the mirrors: ( md5sum Filename ) i386: 5ba924d587ab95749a3c6cddb38c0b52 iscsi-initiator-utils-6.2.0.868-0.18.el5.i386.rpm Source: 1c02379e11764097478a43e2b4364e88