similar to: zpool status can not detect the vdev removed?

I make a file zpool like this: bash-3.00# zpool status pool: filepool state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM filepool ONLINE 0 0 0 /export/f1.dat ONLINE 0 0 0 /export/f2.dat ONLINE 0 0 0 /export/f3.dat ONLINE 0 0 0 spares

Hi experts zpool import shows some weird config of an old zpool bash-3.00# zpool import pool: data1 id: 7539031628606861598 state: FAULTED status: One or more devices are missing from the system. action: The pool cannot be imported. Attach the missing devices and try again. see: http://www.sun.com/msg/ZFS-8000-3C config: data1 UNAVAIL insufficient replicas

Hello, I''ve looked quickly through the archives and haven''t found mention of this issue. I''m running SXCE (snv_99), which I believe uses zfs version 13. I had an existing zpool: -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mail.opensolaris.org/pipermail/zfs-discuss/attachments/20081026/a5e2f25b/attachment.html>

I''m using Solaris 10u6 updated to u7 via patches, and I have a pool with a mirrored pair and a (shared) hot spare. We reconfigured disks a while ago and now the controller is c4 instead of c2. The hot spare was originally on c2, and apparently on rebooting it didn''t get found. So, I looked up what the new name for the hot spare was, then added it to the pool with "zpool

Hey, guys I just do the test for use loop device as vdev for zpool Procedures as followings: 1) mkfile -v 100m disk1 mkfile -v 100m disk2 2) lofiadm -a disk1 /dev/lofi lofiadm -a disk2 /dev/lofi 3) zpool create pool_1and2 /dev/lofi/1 and /dev/lofi/2 4) zpool export pool_1and2 5) zpool import pool_1and2 error info here: bash-3.00# zpool import pool1_1and2 cannot import

Suppose the requirements for storage shrink ( it can happen ) is it possible to remove a mirror set from a zpool? Given this : # zpool status array03 pool: array03 state: ONLINE status: The pool is formatted using an older on-disk format. The pool can still be used, but some features are unavailable. action: Upgrade the pool using ''zpool upgrade''. Once this is

in Solaris 10 U4, type: -bash-3.00# zpool create -R filepool mirror /export/home/f1.dat /export/home/f2.dat invalid alternate root ''Segmentation Fault (core dumped) -- This messages posted from opensolaris.org

Good morning, I have a problem with ZFS: ZFS filesystem version 4 ZFS storage pool version 15 Yesterday my comp with Freebsd 8.2 releng shutdown with ad4 error detached,when I copy a big file... and after reboot in 2 wd green 1tb say me goodbye. One of them die and other with zfs errors: Apr 24 04:53:41 Flash root: ZFS: vdev I/O failure, zpool=zroot path= offset=187921768448 size=512 error=6

New server build with Solaris-10 u5/08, on a SunFire t5220, and this is our first rollout of ZFS and Zpools. Have 8 disks, boot disk is hardware mirrored (c1t0d0 + c1t1d0) Created Zpool my_pool as RaidZ using 5 disks + 1 spare: c1t2d0, c1t3d0, c1t4d0, c1t5d0, c1t6d0, and spare c1t7d0 I am working on alerting & recovery plans for disks failures in the zpool. As a test, I have pulled disk

hello folks, I am running Solaris 10 U3 and I have small problem that I dont know how to fix... I had a pool of two drives: bash-3.00# zpool status pool: mypool state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM mypool ONLINE 0 0 0 emcpower0a ONLINE 0 0 0 emcpower1a ONLINE

I believe ZFS is causing a panic whenever I attempt to mount an iso image (SXCR build 39) that happens to reside on a ZFS file system. The problem is 100% reproducible. I''m quite new to OpenSolaris, so I may be incorrect in saying it''s ZFS'' fault. Also, let me know if you need any additional information or debug output to help diagnose things. Config: [b]bash-3.00#

Ciao, the rot filesystem of my thumper is a ZFS with a single disk: bash-3.2# zpool status rpool pool: rpool state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 c5t0d0s0 ONLINE 0 0 0 spares c0t7d0 AVAIL c1t6d0 AVAIL c1t7d0

I have a pool with 3 partitions in it. However, one of them is no longer valid, the disk was removed and modified so that the original partition is no longer available. I cannot get zpool to remove it from the pool. How do I tell zfs to take this item out of the pool if not with "zfs remove" ? Thanks, Wyllys here is my pool: zpool status pool: bigpool state: FAULTED status:

Hi all. A quick question about the checksum error detection routines in ZFS. Surely ZFS can decide about checksum errors in a redundant environment but what about an non-redundant one? We connected a single RAID5 array to a v440 as a NFS server and while doing backups and the like we see the "zpool status -v" checksum error counters increment once in a while. Nevertheless the

So, my Areca controller has been complaining via email of read errors for a couple days on SATA channel 8. The disk finally gave up last night at 17:40. I got to say I really appreciate the Areca controller taking such good care of me. For some reason, I wasn''t able to log into the server last night or in the morning, probably because my home dir was on the zpool with the failed disk

Hi, I had a hot spare used to replace a failed drive, but then the drive appears to be fine anyway. After clearing the error it shows that the drive was resilvered, but keeps the spare in use. zpool status pool2 pool: pool2 state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM pool2 ONLINE 0 0 0 raidz2

Hello All, I''m transitioning data off my old UFS partitions onto ZFS. I don''t have a lot of duplicate space so I created a zpool, rsync''ed the data from UFS to the ZFS mount and then repartitioned the UFS drive to have partitions that match the cylinder count of the ZFS. The idea here is that once the data is over I wipe out UFS and then attach that partition to the

I'm trying to destroy a zfs array which I recently created. It contains nothing of value. # zpool status pool: storage state: ONLINE status: One or more devices could not be used because the label is missing or invalid. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Replace the device using 'zpool replace'.

# zpool list NAME SIZE USED AVAIL CAP HEALTH ALTROOT jira-app-zpool 272G 330K 272G 0% ONLINE - The following command hangs forever. If I reboot the box , zpool list shows online as I mentioned the output above. # zpool destroy -f jira-app-zpool How can get rid of this pool and any reference to it. bash-3.00# zpool status pool: jira-app-zpool state: UNAVAIL

Hi Folks.. I have a system that was inadvertently left unmirrored for root. We were able to add a mirror disk, resilver, and fix the corrupted files (nothing very interesting was corrupt, whew), but zpool status -v still shows errors.. Will this self correct when we replace the degraded disk and resilver? Or is there something else that I''m not finding that I need to do to clean up?