similar to: another iscsi question

I''m trying to set up a iscsi connection (with MPXIO) between my Vista64 workstation and a ZFS storage machine running OpenSolaris 10 (forget the exact version). On the ZFS machines, I have two NICS. NIC #1 is 192.168.1.102, and NIC #2 is 192.168.2.102. The NICs are connected to two separate switches serving two separate IP spaces. On my Vista64 machine, I also have two NICs connected in

Dear all, i've appended the below to /etc/bashrc it works like a charm with ssh connections though SFTP sessions fail since the below is being sent to the intiator. any way of limiting the below to none sftp sessions? or any other idea for it to work? # If id command returns zero, you?ve root access. if [ $(id -u) -eq 0 ]; then # you are root, set red colour prompt echo

I have a server which may or may not have a USB storage device connected when it boots. It also attaches to a disk array with a number of logical disks using ISCSI. When booted with the USB device present, that is attached to /dev/sdb and the ISCSI disks are attached to /dev/sdc up. If the USB device is not present, then the ISCSI disks are attached to /dev/sdb onwards. Is there a way to force

I have a (CentOS4.5) cluster in which the servers mount a GFS partition which is an LVM2 logical volume created as a mirror of two iSCSI- connected drives (with a third for the log). The LV was created using a command along the lines of: lvcreate -m 1 ... /dev/sdb /dev/sdc /dev/sdd where sd[bc] are the mirrored (iSCSI) PVs in the VG and sdd is the log. I have this working and can write data

OS Solaris 5.9 (9) Generic_122300-13 (clean build) nscd daemon has been disabled and is not running No NIS or NISPLUS Samba Version 3.0.26a Complied using the following options --with-acl-support -with-winbind -with-pam smbd, nmbd & winbind daemons are all started [global] workgroup = MTCB2 security = domain log level = 3 log file =

On 05.09.19 10:14, Gerd Hoffmann wrote: > On Tue, Aug 06, 2019 at 09:00:10PM +0300, Jaak Ristioja wrote: >> Hello! >> >> I'm writing to report a crash in the QXL / DRM code in the Linux kernel. >> I originally filed the issue on LaunchPad and more details can be found >> there, although I doubt whether these details are useful. > > Any change with kernel

On 05.09.19 10:14, Gerd Hoffmann wrote: > On Tue, Aug 06, 2019 at 09:00:10PM +0300, Jaak Ristioja wrote: >> Hello! >> >> I'm writing to report a crash in the QXL / DRM code in the Linux kernel. >> I originally filed the issue on LaunchPad and more details can be found >> there, although I doubt whether these details are useful. > > Any change with kernel

Hi all, Looking for a "best practices" way to share out to both Mac and PC easily. I know Windoze enables the same sharepoint for both the mac and pc shares and there don't seem to be any real "problems" by doing that. However I work in an environment which forces us to utilize Win9x through XP as well as OS 9 through 10.x on the mac side. I need a user friendly way to

On CentOS 5, the current centosplus kernel doesn't want to play with the kmod-gfs package (because kmod-gfs wants the stock kernel): # yum install kmod-gfs gives me: Transaction Check Error: package kernel-2.6.18-8.1.14.el5.centos.plus (which is newer than kernel-2.6.18-8.1.14.el5) is already installed Should it work, or is there a separate centosplus build that I've not

Hi, I am pretty new in the wine world and maybe I am asking a stupid question, so please have mercy. I would like to run an application under wine directly, without waiting for the prompt and without executing it manually there. Something like autostart - I execute a Linux shell command that starts the wine and the needed application directly. Is this possible? My application dumps some plain

Occasionally my /etc/hosts file gets corrupted. The IP address and the host name switch positions with the host name to the left. What this happens, my 7940 phones won't register. Fixing /etc/hosts allows the phones to register. Do any of you Linux gurus know who is corrupting the hosts file? Thanks, -- Michael Welter Introspect Telephony Corp. Denver, Colorado +1 303 674 2575

Hello, I?m using ZFS to export some iscsi targets for the virtual box iscsi initiator. It works ok if I try to install the guest OS manually. However, I?d like to be able to import my already prepared guest os vdi images into the iscsi devices but I can?t figure out how to do it. Each time I tried, I cannot boot. It only works if I save the manually installed guest os and re-instate the same

Anyone running centos with an iscsi filesystem mounted? If so: What version of centos? Which iscsi package? What filesystem are you using on the mount? Does it perform like you'd expect? Thanks, peter

Hi, I want to take snapshots of a iSCSI devices from a target that hasn't snapshot/cloning capabilities (it's a Infortrend A16E storage array). What method are you using to make snapshots/clones of iSCSI targets using Open-iSCSI + CentOS? What about using Open-iSCSI + LVM snapshots system? For example: - Take a LVM snapshot in the initiator with "lvcreate". - Give read-only

Hi, I increased the size of one of the LUNs and on CentOS 5.4 if I restart iscsi (`service iscsi restart`) I'll see the the new size but this will disconnect all other LUNs. I'm hoping that there is isciadm or some other command that will force iscsi to rediscover the LUNs but I can't seem to be able to come up with one. Resize2fs says that there is nothing to be done. I'm

Hi, I try to define an iscsi pool with virsh but I always get the following error : error :internal error: missing backend for pool type 5 (iscsi) And yet libvirt was compiled with iscsi support : configure: Storage Drivers configure: configure: Dir: yes configure: FS: yes configure: NetFS: yes configure: LVM: yes configure: iSCSI: yes configure: SCSI: yes configure:

Has anyone succesfully setup, and used CentOS as an iSCSI server? I'm trying to setup a server with 4x500GB HDD's, setup in RAID 10 to act as an iSCSI server for a virtualization project, but I can't find a decent howto on how to setup an iSCSI server using CentOS. I would like to setup something like Openfiler, but we also need todo some other stuff that OpenFiler doesn't

Hi, i have a debian Etch x86_64 with a xen 3.1 on a kernel 2.6.18-xen. I have some DomU with Debian Etch. I installed open-iscsi, configure /etc/iscsi/iscsid.conf: --- node.active_cnx = 1 node.startup = automatic #node.session.auth.username = dima #node.session.auth.password = aloha node.session.timeo.replacement_timeout = 120 node.session.err_timeo.abort_timeout = 10

Hi all, I would like to know if I could share some space on on of my servers, to another server(s) using the iSCSI protocal? I can see that CentOS can connect to an iSCSI server, but can it act as a iSCSI server? Is so, does anyone have some good HOWTO / tutorials / docs on how to set it up? I'm running CentOS 5.2 -- Kind Regards Rudi Ahlers

We currently have a MD3000i with an iSCSI LUN shared out to our apache web server. We are going to add another apache web server into the mix using LVS to load balance, however, I am curious how well iSCSI handles file locking and data integrity. I have the iSCSI partition formatted as ext3. Is my setup totally flawed and will ext3 not allow for data integrity with multiple apache hosts