similar to: libMrm.so.3

How can I efficiently search for programs and packages that are available as part of the CentOs4.3 distribution? I am using CentOs4.3 and need to install packages that are apparently not part of this distribution. What RedHat version do I have to consider if I want to use rpm's for RedHat instead? Dirk

Hi all, I have installed a CentOS4.3 box and migrated some application from FC1 to the new box, everything else runs perfectly except syslogd/klogd. /etc/rc.d/init.d/syslog starts without any problem, but there is nothing logged into /var/log/messages, even I restart the service. However, I tried to shut the service down and run "syslogd -m 0 &" and "klogd -x &" as

I have successfully set up a very nice kickstart install with the i386 version of CentOS 4.3 and it works great. I am using a custom kickstart script and the kernel and initrd from disc1/images. But when I try to duplicate this for a 64 bit setup (changing paths in my tftp server, ks.cfg, etc to point to the 64 bit stuff) it successfully tftp's everything just as it should (tethereal

Alle, Has anyone gotten Zimbra to work on an installation of CentOS4.3, x86_64 architecture? I have tried to install the RHEL4 3.1.4 32-bit version with the following error: Found zimbra-core Error: attempting to install i386 packages on a x86_64 OS. Exiting... Shouldn't this work with 32-bit compat? I've also tried to install RHEL4_64 4.0.0.RC1 but post installation fails when

Hi, Is it possible to create one raid volume of 3.3 TB (9550SX-8lp X WD5000YS - 8nos) and create a file system with ext3? (CentOs4.3 64bit) The maximum I am getting is 1.24tb and fdisk returns no more space available. But when I say fdisk /dev/sda it list full size of 3.3 TB. But I can not create partitions more than 1.24TB. Any idea? Thanks Rajeev -------------- next part

Hello, We're getting around to upgrading our mail server and here are the quick specs: MegaRAID SCSI 320-2X http://www.lsilogic.com/products/megaraid/scsi_320_2x.html TYAN Transport TA26 B2882T26U8H 2U Barebone Server-Rackmount - Retail http://www.newegg.com/Product/Product.asp?item=N82E16856152007 plus RAM, CPU and 4 SCSI drives setup in a RAID-5 Is that MegaRAID controller supported in

Hi guys, im installing centos4.3 on my PIII with 2x70GB SCSI disk. when its on the part where it loads the scsi driver, hangs and a display saying disabling irq11. any suggestions ? tnx --------------------------------- Blab-away for as little as 1?/min. Make PC-to-Phone Calls using Yahoo! Messenger with Voice. -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have searched google and came up with too many options and packages that may or may not work for my needs, most articles seem to be for setting up routers. Maybe someone on the list can give me some better insight. I have monitoring turned on my "shift eight (tm)" (Asterisk ;-)) box for all calls. We have over one hundred agents and tons of recordings in wav format. I also

Hello, Any one know how to enable Fiber Channel QLOGIC driver for xen kernel? This driver is available in CentOS4.3 as default. But when i compile xen-3.0.2-2 with linux-2.6.16 or xen-3.0.1with linux-2.6.12, the driver is not there. I tried to turn on QLOGIC by using "make menuconfig" and modified .config file but there is no change in /lib/modules/2.6.x-xen/kernel/drivers/scsi after

Hi, We have patched Centos 4.4 to work properly with the recent DST changes, but our customers are reporting wrong FTP client timestamps based on which areas they live in. What are the two main mechanisms in Centos that control time? I know about /etc/localtime and TZDATA, is there something we may have missed? Or is this perhaps a VSFTPd thing and I could go bug that list? To be clear,

I have 2 machines, one with CentOs4.3 (A) the other with WhiteBox 4(B). The machine A have a new installtion, the machine B has an already exists installation. The machine A has the installytion as is (except tah i choose an IP adress for eth0) 200.118.115.241 from the graphical interface on Hosts Label The machine B has eth0 and eth1, it works as proxy i can connect by ssh from A to B i can ping

Hi! I was wondering if the acroread from your site is somehow stripped of web browser support (dag for RHEL4/CentOS4.3)? Can't seem to find the howto or other files anywhere... Cheers, MaZe.

Hi all, Can I format harddisk partitions with xfs filesystem during installation process using Centos4.3 Server image?? Which params I need to pass to anaconda installer?? Many thanks. -- CL Martinez carlopmart {at} gmail {d0t} com

I wrote in a thread entitled "ip_conntrack_ftp fails to load on CentOS4.3" that I had what I considered to be a borked upgrade, using yum update. When I went from 4.2 -> 4.3 I ceased to be able to use the ip_conntrack_ftp module, thus cutting off my users from ftp access. What I'd like to do is get yum to rerun its update procedure, which should allow any post processing that

> What you are looking for is smbwrapper, which is in fact included with Samba > 2.0. However as it is not supported on all systems it is not included > in the default build (it should work nicely on Solaris though). > Essentially smbwrapper is a preloaded library which intercepts system calls and > simulates a /smb filesystem, so you can access /smb/SERVER/SHARE/file.txt.

For all who are interested: A quick review of CeBIT 2005. :-) CeBIT was a very successfull event. Most of the time, the asterisk-booth was crowded with more people than we could talk to. We had with us a demo-installation including different IP-phones, digital and analog phones as well as a Siemens HiPATH PBX to which our Asterisk-server served as a VoIP-gateway, and many people were impressed

Hi, There is a severe problem with the db-1.85.4 library''s Linux port that can be found on sunsite.unc.edu under /pub/Linux/libs/db-1.85.4-src.tar.gz (sp?): This library contains a "snprintf" function which breaks down to a common sprintf, ignoring the size parameter. Obviously, this was thought to be a terribly bad work-around for C libraries which don''t contain an

Can anyone point me in the right direction for correcting errors on an HD when using LVM? I've tried e2fsck and indicates bad block. I've tried with -b 8193, 16384, and 32768 and no good. I've found some info about reiserfsck on google, but this utility doesn't seem to be included in Centos4.3. I did find it on my old FC1 box. I am thinking now I really should have went with

Helo I have a big problem with samba and windows 2003 ads. I have a DC in win 2003 and centos4.3 with samba ADS. Registration of samba in ads has gone well , kinit gives no error and also net ads join worked well I can access shares based on the user in my DC, I am not using ACL, only the permission in the system and DC. My problem can be described in the following way. - getent

Hi all, I am having a problem with mysql. I set up root password set password for root at localhost=password('xxxxxxxxx'); set password for root@'xxx.yyyy.com'=password('yyyyyyyy'); after that I tried to log in, but mysql says ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES) I guess that I had the right password. My