similar to: Controlling Outlets on UPS

Displaying 20 results from an estimated 3000 matches similar to: "Controlling Outlets on UPS"

2008 Dec 06
1
MGE Evolution and programmable outlets configuration
Hi, I'm a MGE Evolution 650 owner and, after putting in place a basic configuration for controlling my UPS, I'm going to tune a little bit better NUT for my needs. First of all let me describe my little (SOHO) scenario: I have the ISP modem/switch (providing VoIP too, so it's important to keep it running as much as possible), a small low power home server and a much hungrier PC.
2007 Jul 09
1
bcmxcp - patch for power cycling individual outlets/load segments
Also works if you want to shutdown one segment/outlet early in the power failure. It should stay off until utility power returns and then apply the configured delay - although I haven't tested this aspect. -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: bcmxcp.c.diff Url:
2020 Apr 28
2
Tripp-Lite SMART1500LCD: powers off with /etc/killpower...then powers back on...
Hi Everyone, I recently bought a Tripp-Lite SMART1500LCD for my Linux Mint 19.3 machine, connected via a USB cable. I installed Nut 2.7.4 from the Mint package repository via sudo apt update && sudo apt install nut. Everything works great: NUT issues low battery warning when it reaches the set low battery point and then issues shutdown commands...computer shuts down..then the UPS shuts
2008 Jan 23
1
empty ups.status on TrippLite SMART1500RMXL2U
Hello, I have a TrippLite SMART1500RMXL2U that I'm trying to get running with Nut 2.2.1. Running upsdrvctl start works, upsd works, but upsc has "issues": je-nas:~/src/nut-2.2.1# upsdrvctl start Network UPS Tools - UPS driver controller 2.2.1- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11 (2.2.1-) Warning: This is an experimental driver. Some features may not
2014 Jun 17
3
Question about recycle power of Tripp Lite UPS
Hello, We are trying to develop a mechanism to power cycle Tripp Lite UPS. When we checked the upscmd, looks like the only command we can use is shutdown.reboot(sudo upscmd -u user -p password ups shutdown.reboot). Because the PC is connected to UPS directly and we would prefer shutdown PC before power cycle the UPS. But if we run shutdown PC first it won't run the power cycle the UPS script
2014 Jun 17
3
Question about recycle power of Tripp Lite UPS
Hello, We are trying to develop a mechanism to power cycle Tripp Lite UPS. When we checked the upscmd, looks like the only command we can use is shutdown.reboot(sudo upscmd -u user -p password ups shutdown.reboot). Because the PC is connected to UPS directly and we would prefer shutdown PC before power cycle the UPS. But if we run shutdown PC first it won't run the power cycle the UPS script
2014 Jun 18
0
Question about recycle power of Tripp Lite UPS
[moving this to nut-upsuser, since other users of Tripp Lite equipment may have specific experience with this.] On Jun 17, 2014, at 7:51 PM, Shen Chuan <shen at minutekey.com> wrote: > We are trying to develop a mechanism to power cycle Tripp Lite UPS. When we checked the upscmd, looks like the only command we can use is shutdown.reboot(sudo upscmd -u user -p password ups
2008 May 14
5
RailsConf vs. My MacBook's Battery. ( Power Outlet Availability )
So my Macbook''s battery sucks... and I''m thinking of grabbing a new one, I''m curious how the availability of power outlets have been at RailsConfs. For those who have gone before, was it hard to find an outlet to plug into? Are they mindful of this? I hope so. Thanks in advance. --~--~---------~--~----~------------~-------~--~----~ You received this message because
2018 May 07
4
Tripp Lite SU5000RT3U
Hi, I am trying to configure my Tripp Lite SU5000RT3U on Ubuntu 18.04 as I am not able to completely get all the data from the UPS. After installing all required packages from the Ubuntu repos (had to run sudo apt-get install dkms, I had to install the displaylink drivers from displaylink.org by doing sudo ./displaylink-driver-4.2.29.run, and I created a sim link by doing the following: sudo ln
2017 Jun 08
2
DICompileUnit duplication in LLVM 4.0.0?
Thank you. What I need to do to address this? Open an issue on bugs.llvm.org? I'm not sure what the fix needs to be in the cloner. On Thu, Jun 8, 2017 at 4:19 PM, Peter Collingbourne <peter at pcc.me.uk> wrote: > There have in the past been bugs in the cloner involving duplicate > DICompileUnits (see e.g. https://reviews.llvm.org/D29240), this one may > need a similar fix.
2014 Jun 18
2
Question about recycle power of Tripp Lite UPS
Hello Charles, Thank you for your comment. Just tried to use ups.delay.shutdown to postpone the UPS shutdown. The thing is that if the PC shutdown first, then the UPS, it wasn't able to send "shutdown.reboot" any more because everything is power off after the UPS shuts down. Also play on the watchdog for Tripp Lite. Looks like it has the command of reset.watchdog but not
2018 May 12
5
Tripp Lite SU5000RT3U
On May 8, 2018, at 10:05 PM, Charles Lepple <clepple at gmail.com> wrote: > >> I'm new to this, so let me know what you need from me and I will try my best. This UPS does power our production servers, so shutting things down aren't an easy task, but this weekend might open up some opportunity for that if need be. If I need to test it by unplugging the main power, that I can
2002 Mar 20
3
Cloning an EXT3 drive?
Hello: I've been using EXT3 for awhile with Slackware Linux. I setup a master drive and I've been cloning it to identical hard drives using a hardware cloning device. My new batch of hard drives are a different size, so I can't use the hardware cloner. Is there any way to move the drive to a new, larger drive short of re-installing everything from scratch to make a new master?
2014 Sep 04
2
Smart1500lcdt will not connect with usbhid-ups
I talked to Tripp Lite Technical support. Their policy is that they only support Fedora and SUSE. There is no one there that could help with Ubuntu or NUT issues. The only answer they could give me was to port the rpm files to Ubuntu and use them. This is way beyond my experience level. I will go to the local electronics store and buy a cheap USB 2 hub to see if that works. I will post the
2016 Apr 15
2
Can DISubprogram be renamed?
Peter, I am afraid I am missing a big picture with debug info cloning. Certainly after your patch (and possibly in some cases earlier): Cloning: Reduce complexity of debug info cloning and fix correctness issue. Commit r260791 contained an error in that it would introduce a cross-module reference in the old module. It also introduced O(N^2) complexity in the
2007 May 11
11
tripp lite smart2200RMXL2U error reading protocol
I'm working on a gentoo server with Nut 2.0.5-r1 and libusb-0.1.12. I originally tried the hidups driver which seemed to work, but produced a large amount of unhandled events. Then I tried the newhidups which told me my ups wasn't supported. When I try using tripplite_usb -u root -DDDD /proc/bus/usb/002/002 I get that there isn't a match. But when I try using tripplite_usb -DDDD
2014 Sep 05
0
Smart1500lcdt will not connect with usbhid-ups KSTAR BM3150 1500VA "Line Interactive" High Frequency UPS
Barry, I have had success with NUT on Debian and an EATON 5E2000IUSB-AU 5E 2000VA/1200W UPS With 3 x OUTLETS which I believe is good value. I would believe the the EATON ?5E 1500VA/900W UPS With 3 x OUTLETS would work just as well. The 1500VA also uses the same batteries as the 2000VA so I would believe it would run its raited load longer than 2000VA. My eight drive RAID driver uses less that
2015 Aug 15
2
Small patch to scale the values for TRIPP-LITE SMART*LCDT's
Hi, I just decided to fix some scaling issues for my UPS (TRIPP-LITE SMART1500LCDT). Apparently that issue existed for some time (and I knew about it as well:-() See http://thread.gmane.org/gmane.comp.monitoring.nut.devel/6482 for a thread. My little patch is attached (against 2.7.3). It seems to be working better for me but I don't have any other TRIPP-LITE's to test that I did
2015 Aug 15
2
Small patch to scale the values for TRIPP-LITE SMART*LCDT's
Hi, I just decided to fix some scaling issues for my UPS (TRIPP-LITE SMART1500LCDT). Apparently that issue existed for some time (and I knew about it as well:-() See http://thread.gmane.org/gmane.comp.monitoring.nut.devel/6482 for a thread. My little patch is attached (against 2.7.3). It seems to be working better for me but I don't have any other TRIPP-LITE's to test that I did
2014 Jun 28
0
The dreaded Tripp Lite SMART500RT1U and NUT
On Thu, Jun 26, 2014 at 10:20 PM, Steve Ballantyne <steve.ballantyne at gmail.com> wrote: >> However, we don't have all of the 09AE/0001 protocols decoded in the >> tripplite_usb driver. > > I can try to help out on this front? :-) Definitely. >> > 9.783126 Unknown input voltage range: 0x02 >> > 9.783308 Unknown number of switchable