similar to: are these errors dangerous

Hi gurus, I like zpool iostat and I like system monitoring, so I setup a script within sma to let me get the zpool iostat figures through snmp. The problem is that as zpool iostat is only run once for each snmp query, it always reports a static set of figures, like so: root at exodus:snmp # zpool iostat -v capacity operations bandwidth pool used avail read

I posted a thread on this once long ago[1] -- but we''re still fighting with this problem and I wanted to throw it out here again. All of our hardware is from Silicon Mechanics (SuperMicro chassis and motherboards). Up until now, all of the hardware has had a single 24-disk expander / backplane -- but we recently got one of the new SC847-based models with 24 disks up front and 12 in the

Hi list, I''ve got a system with 3 WD and 3 seagate drives. Today I got an email that zpool status indicated one of the seagate drives as REMOVED. I''ve tried clearing the error but the pool becomes faulted again. Taken out the offending drive and plugged into a windows box with seatools install. Unfortunately seatools finds nothing wrong with the drive. Windows seems to see

Hello, I would like to connect jabber client (Exodus) to Asterisk 1.4. Asterisk 1.4 already supported jabber (client/component), didn't it? Can I connect Exodus to Asterisk directly? And if yes, please tell me how to connect? Kawamoto -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi all, I''ve got a lot of video files on a zfs/cifs fileserver running SXCE. A little while ago the dual onboard NICs died and I had to replace them with a PCI 10/100 NIC. The system was fine for a couple of weeks but now the performance when viewing a video file from the cifs share is appauling. Videos stop and jerk with audio distortion. I have tried this from several client machines

Under Solaris 10 u6 , No matter how I configured my ARECA 1261ML Raid card I got errors on all drives that result from SCSI timeout errors. yoda:~ # tail -f /var/adm/messages Jan 9 11:03:47 yoda.asc.edu scsi: [ID 107833 kern.notice] Requested Block: 239683776 Error Block: 239683776 Jan 9 11:03:47 yoda.asc.edu scsi: [ID 107833 kern.notice] Vendor: Seagate

After having massive problems with a supermicro X7DBE box using AOC-SAT2-MV8 Marvell controllers and opensolaris snv79 (same as described here: http://sunsolve.sun.com/search/document.do?assetkey=1-66-233341-1) we just start over using new hardware and opensolaris 2008.05 upgraded to snv94. We used again a supermicro X7DBE but now with two LSI SAS3081E SAS controllers. And guess what? Now we get

Ok, this is not a OpenSolaris question, but it is a Solaris and ZFS question. I have a pool with three mirrored vdevs. I just got an error message from FMD that read failed from one on the disks,(c1t6d0). All with instructions on how to handle the problem and replace the devices, so far everything is good. But the zpool still thinks everything is fine. Shouldn''t zpool also show

After applying 125205-07 on two X4500 machines running Sol10U4 and removing "set sata:sata_func_enable = 0x5" from /etc/system to re-enable NCQ, I am again observing drive disconnect error messages. This in spite of the patch description which claims multiple fixes in this area: 6587133 repeated DMA command timeouts and device resets on x4500 6538627 x4500 message logs contain multiple

Ahh, many sleepless nights spent on a stinky Windows 98 box! I'm using Samba 2.2.0 with Red Hat Linux 7.1, and am having trouble resolving the samba server. I went through the "fault tree" in the "Using Samba" book, and this was the section I got stuck on. Do I need to be running a name server besides nmbd? nmblookup returns some results: ----------8<----------

We recently installed a 24 disk SATA array with an LSI controller attached to a box running Solaris X86 10 Release 4. The drives were set up in one big pool with raidz, and it worked great for about a month. On the 4th, we had the system kernel panic and crash, and it''s now behaving very badly. Here''s what diagnostic data I''ve been able to collect so far: In the

Hi, We have a number of 4200''s setup using a combination of an SVM 4 way mirror and a ZFS raidz stripe. Each disk (of 4) is divided up like this / 6GB UFS s0 Swap 8GB s1 /var 6GB UFS s3 Metadb 50MB UFS s4 /data 48GB ZFS s5 For SVM we do a 4 way mirror on /,swap, and /var So we have 3 SVM mirrors d0=root (sub mirrors d10, d20, d30, d40) d1=swap (sub mirrors d11, d21,d31,d41)

Hi, I''m running Opensolaris 2009.06, and I''m facing a serious performance loss with ZFS ! It''s a raidz1 pool, made of 4 x 1TB SATA disks : zfs_raid ONLINE 0 0 0 raidz1 ONLINE 0 0 0 c7t2d0 ONLINE 0 0 0 c7t3d0 ONLINE 0 0 0 c7t4d0 ONLINE 0 0

Hello I have an main disk (operating sistem) and an spare disk for backup. Is it possible with rsinc command to copy whole disk n1 to disk2? Like: #rsinc -av /dev/sd0 /dev/sd1 thanks -- View this message in context: http://www.nabble.com/Rsync-to-spare-disk-tf2865622.html#a8008100 Sent from the Samba - rsync mailing list archive at Nabble.com.

Hi all, I'm using the function "fitdistr" (library MASS) to fit a distribution to given data. What I have to do further, is getting the log-Likelihood-Value from this estimation. Is there any simple possibility to realize it? Regards, Carsten

What unmitigated bullshit. Your attempt at logic is laughable. You hold up threadbare stereotypes as the norm, when in reality they are little more than characters straight out of Central Casting. The "genius hermit who can't associate with people" is dumb and false. It's meant to excuse behavior that is unacceptable, when in reality a person who cannot interact with people is

I''m curious about if there are any potential problems with using LVM metadevices as ZFS zpool targets. I have a couple of situations where using a device directly by ZFS causes errors on the console about "Bus and lots of "stalled" I/O. But as soon as I wrap that device inside an LVM metadevice and then use it in the ZFS zpool things work perfectly fine and smoothly (no

Hello zfs-discuss, One of a disk started to behave strangely. Apr 11 16:07:42 thumper-9.srv sata: [ID 801593 kern.notice] NOTICE: /pci at 1,0/pci1022,7458 at 3/pci11ab,11ab at 1: Apr 11 16:07:42 thumper-9.srv port 6: device reset Apr 11 16:07:42 thumper-9.srv scsi: [ID 107833 kern.warning] WARNING: /pci at 1,0/pci1022,7458 at 3/pci11ab,11ab at 1/disk at 6,0 (sd27): Apr 11 16:07:42 thumper-9.srv

Every day we see pause times of sometime 60 seconds to read 1K of a file for local reads as well as NFS in a test setup. We have a x4500 setup as a single 4*( raid2z 9 + 2)+2 spare pool and have the files system mounted over v5 krb5 NFS and accessed directly. The pool is a 20TB pool and is using . There are three filesystems, backup, test and home. Test has about 20 million files and uses 4TB.

Hi all; We have a Solaris 10 U9 x86 instance running on Silicon Mechanics / SuperMicro hardware. Occasionally under high load (ZFS scrub for example), the box becomes non-responsive (it continues to respond to ping but nothing else works -- not even the local console). Our only solution is to hard reset after which everything comes up normally. Logs are showing the following: Jan 8