similar to: lm_sensors with k8v se

I found that lm_sensors got installed because of a dependency on my first Xen VM that I updated to 5.3. lm_sensors doesn't make sense in a VM. I thought, ok let's check after the update who wants it. However: rpm -q --whatrequires lm_sensors no package requires lm_sensors (same for --triggeredby with lm_sensors or the packages below) Trying to remove lm_sensors reveals these packages:

CentOS Errata and Bugfix Advisory 2012:1309 Upstream details at : https://rhn.redhat.com/errata/RHBA-2012-1309.html The following updated files have been uploaded and are currently syncing to the mirrors: ( sha256sum Filename ) i386: a41983848e162aabb0fe146db72c0aa38189dde131820336cc550c29f2a7cd43 lm_sensors-3.1.1-17.el6.i686.rpm

Problem and solution, not sure if correct After upgrading to 5.1 and restarting, lm_sensors complained "General Parse Error." Google pointed here: http://www.lm-sensors.org/wiki/Devices Where I found this under "SENSOR CHIP DRIVERS - STATUS" AMD --> "Since Kernel 2.6.19" Latest AMD K8 processors have integrated sensors which can be read directly without any

CentOS Errata and Security Advisory CESA-2005:825 lm_sensors security update for CentOS 4 x86_64: https://rhn.redhat.com/errata/RHSA-2005-825.html refers The following updated files have been uploaded and are currently syncing to the

I have a Tyan Thunder K8HM (S3892) motherboard and I am trying to get lm_sensors to work with it. The problem is that I am getting conflicting information. The source for lm_sensors says not to compile the modules for the 2.6 kernel. The information from Tyan says that I need to compile the modules if my kernel is less than 2.6.12. Has anyone here configured lm_sensors for this motherboard?

CentOS Errata and Security Advisory CESA-2005:825 lm_sensors security update for CentOS 4 i386: https://rhn.redhat.com/errata/RHSA-2005-825.html refers The following updated files have been uploaded and are currently syncing to the mirrors:

Hi All, I'm trying to get lm_sensors to work on a Shuttle with an AMD K10. The version of lm_sensors in the main CentOS repo is 2.10.7, which is two years old now. Support for the K10 was added about a year ago. So, does anyone know if there are binaries available for more recent versions of lm_sensors? Also, if anyone has knowledge of the sensors layout for recent Shuttle AMD motherboards,

CentOS Errata and Security Advisory 2005:825 https://rhn.redhat.com/errata/RHSA-2005-825.html The following updated files have been uploaded and are currently syncing to the mirrors: files: updates/alpha/RPMS/lm_sensors-2.8.7-2.40.3.alpha.rpm updates/alpha/RPMS/lm_sensors-devel-2.8.7-2.40.3.alpha.rpm -- Pasi Pirhonen - upi at iki.fi - http://iki.fi/upi/ -------------- next part

Hello, maybe you're interested in building an rpm of lm_sensors containing a more recent lm_sensors rpm (latest snapshot 'r4197-20061007'). Then have a look at http://lists.lm-sensors.org/pipermail/lm-sensors/2006-October/018052.html Perhaps there's someone who wants to take over maintenance for building this rpm from the snapshots in some other repo than the base one... (I

Has anyone succeeded in getting lm_sensors to produce useful output for intel D945-based motherboards? According to the lm_sensors site, I need a newer kernel (2.6.16) to read the ICH7 data. I noticed the i2c patches in the kernel source rpm, but no joy. I'd be okay with building my own modules, but haven't found anyone to provide the kernel module source apart from the kernel

Trying to get cpu temps from lm_sensors for a Tyan s4985 motherboard, just installed centos 5.4. Tyan release some lm_sensors conf files and other information which I have done, but I am not getting any cpu temps. I was wondering if anyone out there was running this board and if you have gotten temps working for your cpu, here is my output...Thanks in advance. w83627hf-isa-0c00 Adapter: ISA

Hi all :) Using lm_sensors, I can see few temperature indicator. M/B Temp: +39?C (low = +15?C, high = +40?C) sensor = thermistor CPU Temp: +33?C (low = +15?C, high = +45?C) sensor = thermistor Temp3: +53?C (low = +15?C, high = +45?C) sensor = diode What is that Temp3? It's the hottest. Which one is the best to use if I want to use lm_sensor as a general

Sorry if this has been around many times before, but I've done quite a bit of reading and searching for some type of human readable guide for setting up the lm_sensors for hardware monitoring. I've dorked around with the stuff in the system here, but after looking at the /etc/sensors.conf, I don't think I want to delve into that and try to pull out the right group of settings.

hello, I have problem to install lm_sensors on CentOS 4.5 (Linux 2.6.9-42.ELsmp). I am getting error message "FATAL: Module bmcsensors not found." after I enter "modprobe bmcsensors". I got advice to install http://bmcsensors-26.sourceforge.net/ into my kernel, but I don't know how to do it. Does somebody has experience how to get lm-sensors working on CentOS 4.5 ?

Dumb question: how do you start lm_sensors' fan control at boot time? Centos 6 here

Tyan has posted a lm_sensors config file for the Thunder K8SE S2892 at ftp://ftp.tyan.com/software/lms/lms_s2892.conf However when I ran the sensors command on my S2892 I was getting a readout for an adt7463 chip that wasn't referenced in the config file. I emailed Raphael Deng at Tyan asking him to confirm the manual edit needed to get sensors.conf to refer to the adt7463 chip. His

Hey folks, I'm running RHEL 5.3 on 6 boxes - and on every one of them sensors-detect finds nothing. 5 of them are Sun fire 2250 machines, and 1 is Sunfire 4170. Googling and searching this list does not seem to find anything. When I log into the Sun hardware management interface (web interface) I see that it of course is correctly detecting various temperatures of things. But for some

Hi list, Where can i find the i2c-piix4 module for CentOs 5 64 Bit? If i say modprobe i2c-piix4 i get the error: FATAL: Module i2c_piix4 not found. Can you help me? Greetings Sebastian

Send CentOS-announce mailing list submissions to centos-announce at centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request at centos.org You can reach the person managing the list at centos-announce-owner at centos.org When

Send CentOS-announce mailing list submissions to centos-announce at centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request at centos.org You can reach the person managing the list at centos-announce-owner at centos.org When