similar to: tftp replacment

Hi, ?I happily use gpxelinux.0 in subnets where nic-embedded pxe stack can load it from a tftp server pointed by the dhcp daemon. Now I'd like to know the best way to run gpxelinux.0 in a special subnets, where no tftp trafic is allowed, http is served through a reverse proxy, and dhcp is ok. I tried "gpxe on local media (rom/iso/floppy/usb) -> gpxelinux.0" with limited success

I have produced a first cut of integrating gPXE with PXELINUX. This builds, in addition to the usual pxelinux.0, an image called gpxelinux.0 which includes the gPXE network stack. The result is that one can now download images via (almost) any network protocol supported by gPXE, including http. This lets one do fun things like using a CGI or PHP script for the configuration file. SAN

Hi, I have a working PXE environment that chainloads gPXE and loads pxelinux.0 afterwards. As I'm also interested in doing san boot (in my case aoe) I tried loading the new gpxelinux.0 file instead of my gPXE --> pxelinux.0 setup (works) and booting from my aoe target by adding this to the default config file: LABEL doaoe MENU LABEL Continue AoE kernel sanboot.c32 append

Hello, I saw this in the release notes for 4.00: "PXELINUX: TFTP URL syntax (tftp://) supported even when not running gPXE/gpxelinux" I can't find any info describing this new functionality (searched wiki and mailing list), I'm guessing you can now use tftp:// in the paths, e g: LABEL mylabel KERNEL tftp://servername/path/to/mykernel APPEND myoptions Correct? I've

Hi All, I've been enjoying playing with gpxe and gpxelinux, however I have a few questions that I'd love to get some answers for... 1) Will gpxelinux support chain loading of other NBPs without hanging or is this already resolved ? 2) Why does gpxelinux take much longer than pxelinux to enumerate the UUID, MAC address, then hex IP address chop ? 3) Can gpxelinux load gpxe scripts at all

Hello. We are using gpxelinux from SYSLINUX 4.02. We recently purchased some HP Proliant BL460c G6 servers with Broadcom BCM 57711 10Gbit NICS. We have a very simple pxelinux.gpxe script compiled into gpxelinux.0: #!gpxe set use-cached 1 dhcp net0 chain http://webserver/gpxe/gpxe.php?IP=${net0/ip} The PHP script dynamically creates a config file that looks something like this: #!gpxe set

First let me say I'm really excited about the possibility of dynamic menu creation over http using php. When this is stable it will make maintinging some of our pxelinux infrastructure much easier. Id like to thank all involved; I'm really looking forward to the gpxe intigration. After hpa's announment for 3.70pre7 I begain testing. I dropped the new gpxelinux.0 and new c32 modules

Randy McAnally wrote: > > Thank you so much, this is the kind of news I needed! > > ---------- Original Message ----------- > From: "Arends, R.R." <r.r.arends at hro.nl> > To: "Randy McAnally" <rsm at fast-serv.com> > Cc: <gpxe at etherboot.org> > Sent: Wed, 03 Mar 2010 10:10:56 +0100 > Subject: Re: [gPXE] localboot 0 hang on some

Helle, I'm facing a strange issue with memdisk The context : syslinux 3.75 gpxelinux.0 the gpxe stript called from a menu executed through menu.c32 : #!gpxe kernel /modules/memdisk initrd=/freedos initrd /freedos The output before the freeze : /boot.gpxe. ok /modules/memdisk. ok /freedos...... ok MEMDISK 3.75 3.75 Copyright 2001-2009 H. Peter Anvin et al e820: 0000000000000000

Hi Bootmeisters, I am using gpxelinux.0 + sanboot.c32 to boot a diskless machine into Linux. I would like to use device-mapper-multipath to provide fault tolerant access to its root disk. Although I am able to do this by hardcoding the additional paths in the initrd, it would be better if the bootloader could pass the information in the iBFT (iSCSI Boot Firmware Table). However, at the

IRC user ernini first noticed this. We both tried using gpxe/gpxelinux.0 from Syslinux-4.04-pre22. ernini used pxechain to a commercial NBP which RETs (the same as PXELINUX) and failed. Both of us had success with core/pxelinux.0 from Syslinux-4.04-pre22. For my test, I have a VM in VMware Server 2.0.2 (VMHW v7). I loaded gpxelinux.0 using the VM's built-in PXE ROM. Then I used

Hi, I've been trying a couple of day now, but I can't seem to figure it out. On www.etherboot.org, I found the example of configuring gPXE so that it mounts an iSCSI lun and then boot from CDROM so you are able to install on the LUN. But if I use gpxelinux.0 (latest release 3.73), with sanboot.c32 like this: label sanboot2008srv menu label ^[iscsi] Windows server 2008 kernel

Hi All, A while back there was some mention that gpxe may acquire the ability to receive command-line parameters. I'd dearly love if this could become a reality. It would be fantastic if we could have a pxelinux menu config as follows: KERNEL gpxelinux.0 APPEND config http://someserver.net/gpxe-for-this-box.cfg This would solve a huge number of our problems since we don't have the

Hi all, I have just released syslinux-3.70-pre25. Unless someone has something big and scary that either I have managed to miss or was just stumbled over, I'm going to release 3.70 final some time between tomorrow and Monday. Thus, *please holler now* if there are any stop-ship problems still known... -hpa

Hi, I found this message in your online mail archive, i have found the same problem and did some research in the past on this. Maybe you would be interested to know it is a problem on any virtualisation product not just ESX. Second it is a problem in gPXE that you embedded in gPXElinux. The problem was build in gPXE after version 0.97 so any gPXElinux build a newer version has this problem. I

Hello everyone I am experiencing problems with PXELinux/gPXE when netbooting using HTTP. The problems I encounter: - When the intel bootROM is sending out a DHCPDISCOVER it might not recieve an IP address, but the server did send out a OFFER. Capturing packets reveals the packets have been sent, and the client _should_ have recieved it. But when it passes that stage: - When the gPXE bootROM is

I'm using syslinux 4.04 with dynamically generated menus configuration based on info found in various web pages. I'm doing my testing using a vCetner 4.10 Vmware virtual machine. This works some of the time, but not always. I just copied the prebuilt modules from the syslinux 4.04 distribution for gpxelinx.0, menu.c32, reboot.c32, and pxelinux.0 When I boot a machine dhcpd says to boot

On Sat, Oct 24, 2015 at 6:15 PM, Michael Brown via Syslinux <syslinux at zytor.com> wrote: > Also, not a fork: http://git.ipxe.org/ipxe.git/commitdiff/8406115 A fork is a fork, regardless the reasons behind it (yes, I have some understanding in this case). iPXE is based off of forking further development as of a certain gPXE commit with some backporting of gPXE development to iPXE. --

ifgpxe.c32 is a com32 module that will run one command if gPXE extensions are available, and a different command if not. At VMware, we use this module to chain-load gpxelinux.0 from pxelinux.0. Both of those binaries use exactly the same configuration file, and this module allows us to differentiate between the two cases and break the infinite chain-loading loop that might result. Typical usage:

Hi All, I've been trying to understand how to use pxechn.c32 to chain a local pxelinux menu item to a remote server which has it's own pxelinux hierarchy served via TFTP and HTTP. We have no control over DHCP next-server and filename fields so I wanted to exploit the "prefix" -p option that pxechn.c32 accepts. I spent a long time hitting my head against a brick wall until I