similar to: eDonkey and Shorewall

how to block edonkey traffic with shorewall ? Thanks

Hi, I''m running mldonkey on same box as shorewall. I follow this http://mldonkey.sourceforge.net/ShorewallConfiguration to open ports for edonkey protocol I add in /etc/shorewall/rules: # eDonkey 2000 ACCEPT net $FW tcp 4662 ACCEPT net $FW udp 4666 but I could not connect to any edonkey server. I check logs and notice that udp traffic on port 4666 is still dropped. Jul 8 22:35:57

Hello ! I am using shorewall , it is okey. Just i like to forbid edonkey as i did for kazaa using ftwall. Thanks. Wahid.

Hola and thanks for any help in advance I installed mandrake 9 a few days ago and wanted to set up some additional rules to shorewall, bu i failed :) What i want to do is basicly route any incomming udp and tcp packets on port 4665 to a workstation behind the router. router with mandrake 9, eth0 (192.168.0.1) internal net, eth1(10.0.0.0) connected to dsl modem and gets a dynamic ip

Hi, I''m really new to traffic shaping and try to implement the wshaper.htb script. I have a linux box that serves as vdr, mldonkey, samba, apache and mailserver (imap), connected to my LAN with 100mbit. I''m connected to the inet via adsl with a hardware router/firewall, got 384k downlink 64k uplink. When I have mldonkey running, imap (via Outlook) gets *very* slow (mails with

Hi, I get frequent logfile entries from Shorewall similar to the following: Nov 25 11:22:51 10.0.0.248 kernel: Shorewall:net2mill:DROP:IN=eth2 OUT=eth0 SRC=202.96.117.50 DST=10.0.0.10 LEN=56 TOS=0x00 PREC=0x00 TTL=241 ID=0 PROTO=ICMP TYPE=11 CODE=0 [SRC=10.0.0.10 DST=202.101.167.133 LEN=48 TOS=0x00 PREC=0x00 TTL=1 ID=13591 DF PROTO=TCP INCOMPLETE [8 bytes] ] Could someone explain what the

Hi All , My first message and I have a little problem with my FC6 box trying to block emule traffic using layer7 . Here my network : Internet --------- ADSL Router ------------------- FC6 Box -------------------- Emule Box external ADSL : Dynamic Internal ADSL : 192.168.254.1 external FC6 : 192.168.254.3 internal FC6 : 192.168.253.1 Emule Box : 192.168.253.3 I guess that everything

I had been using L7-Filter[1] successfully for edonkey/eMule traffic until recently. I upgraded to the latest release of mldonkey, 2.5.28a, which implements eMule compatibility, and with support for Kademlia[2] enabled, network latency increases greatly. [1] http://l7-filter.sourceforge.net/ [2] http://www.infoanarchy.org/wiki/wiki.pl?Kademlia Has anyone created a new pattern match for

Hello, I'm running centos5. I'm wanting this machine only, none of my other ones, to participate in p2p file sharing, bittorrent, edonkey, maybe other networks. Does anyone have a howto or step by step guide for this? I've installed bittorrent and mldonkey clients, but neither is working, i'm assuming gateway firewall issue, but i've enabled the correct ports, 6881

Hello, I guess a few of you know about the iptables-p2p project at the http://sourceforge.net/projects/iptables-p2p site. This suite has an excellent filter of which I use today and its running very smoothly. The main reason why I use this is because I desperately need to block torrents. IPP2P does not do this at this time (it seems to me in the doc at least). Is it maybe some way we could merge

Hi, A, B and C are three machines. A and C directly access to theInternet while B access to the Internet through A. +-------------------------------------------------------------+ | +-------------+ +-------------+ | | | A | | B | | | | | --- eth0 ---> <--- eth0 --- | | | | | 192.168.0.1

Hi, I''m a complete newbie at this traffic shaping / QoS stuff so please excuse me if this is a silly question. I''ve searched and searched on Google and I just end up confusing myself even more, so I thought I''d post my question to this list and see whether someone can help me! Basically, I am running a Linux box as a NAT router on my home network (machine name marvin).

Hi all. I have a simple question. Is that a way to limit the number os TCP or UDP connection of a single HOST in my network? For exemple: I have a host with IP 192.168.1.202 and he is using edonkey, Kazaa, and Bittorrent at the same time, and he also is infected by a virus that opens more than 500 TCP ports at the same time. So, i want to limit that host to be able to open no more then 30 TCP

Hello I''ve setuped a QOS bridge under debian 3.1 using 2.6.18.3 kernel + iptables 1.3.6 I''ve patched the kernel an Iptables with esfq+layer7 without problems. This simple script doesn''t log nothing ... And I''m sure to have eMule traffic (I''ve checked with tcpdump ) If I remove " -m layer7 --l7proto edonkey \" line I can see

I''m moving to a new place and my new flatmate wants a router because he likes the cleaness of it all in a non geeky way which I can understand. This means it''s going to be hard for me to pursude him to let me run a computer as a router to act as bandwidth cop. But I don''t fancy trying to use ssh, VNC and games while he''s using WindowsUpdate or p2p. So I need

Greetings, I''ve searched, found ftwall, and some other commercial solutions, but am wondering if anyone on this list has any solutions using a linux firewall to block p2p traffic, more specifically Kazaa. Walter Wickersham _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

re I would like to do some firewalling and p2p shaping/limiting on one of the vlans in my network and I was thinking of using linux box as transparent bridged firewall/limiter. For this I''m planning to use AMD64 2.2Ghz box with 2 1gbit NIC (Broadcom 5721), that will be bridged. The box must be totally transparent and unseen in the network, as well as it should have much influence on

After varying degrees of success with p2p detection modules, I would like to write the following rules using iptables to reliably identify p2p traffic: 1. If a host on the network has 5 or more simutaneous tcp connections to ports above 1024, mark all connections to ports 1024 and above as 60. 2. If a host has received (or sent) UDP packets from 5 different hosts'' ports above 1024 in a

Hi all I''m new in this list and i hope to lear and to help if possible. But firt i need help :-( I have this messege in my syslog when my classes and qdiscs goes down. Can any one know what does it mean? Thnx in advance. Yannick Arrimadas Bot Oct 14 16:09:27 pototogorri kernel: HTB init, kernel part version 3.17 Oct 14 16:09:27 pototogorri kernel: Unable to handle kernel paging

Hello, Is there a way to route p2p traffic on a separate ISP connection, just as you would choose a separate connection for http traffic? I tried all sorts of setups based on: http://www.braindump.dk/en/wiki/?wikipage=PolicyRouting but with no luck. Please help :) (ipp2p is up and running) _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl