similar to: ASUS M2V mobo issues

Anyone use the ASUS M2V motherboard. This is the current board I am looking at for AM2/HVM because of the number of slots. Thanks, Greg _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi, I'm probably being fairly stupid. But I did the following, starting with the following two files: # tcprobe -i vts_01.m2v [tcprobe] MPEG elementary stream (ES) [tcprobe] summary for vts_01.m2v, (*) = not default, 0 = not detected import frame size: -g 720x576 [720x576] aspect ratio: 16:9 (*) frame rate: -f 25.000 [25.000] frc=3 # tcprobe -i vts_01.m2a

I have a brand new ASUS MB model M2N-MX which is giving me issues when installing Centos 4.4 64 bit I initially had problems with finding the SATA drives but I resolved that issue by simply selecting the NVIDIA SATA (sata_nv)driver from the list of drivers during the initial install. The install seemed to go fine after that as the installer uses the Generic VESA video driver during the install,

Hello, Could you kindly point me to some instruction, how to encode demuxed files (.m2v and .mp2) to .ogg (Theora + Vorbis)? I was trying to use ffmpeg2theora, but I don't know, how to put two files to ffmpeg2theora (one audio an one video) and did not found, how to mux them into one file? Exist a way, how to do two pass encoding? I'm using Ubuntu Fiesty Linux. Thank you, Jiri Navratil

Hi people. I had finally cross my USB to my DomU windows XP, justs 1 issue: USB 2.0 not working only 1.1 is working. I would to confirm with others that have the MoBo ASUS M4A89TD Pro/USB3 if u have been able to passthrough the USB ports to HVM windows? I had try different settings on my BIOS, different settings on Xen 4.1, this under Centos x64 AMD Athlon II 640. I receive the

Hello list, did someone have a similar issue like I have? -> Bought an AMD X2 3600+ and an Asus M2V (with Attansic L1 Gigabit Ethernet Adapter). Installed Centos 5 64_x86 and build atl1 from this source -> http://www.hogchain.net/attansic/AtL1Linux_v1.0.41.0.tar.gz After an insmod atl1 Centos say good bye with a kernel panic. I could only remind that there stand "Bad RIP value."

Hello, I have problems running Xen (from Debian 7, i386 userspace) on Asus P3-AE5 system (M2V-TVM board) with Athlon 64 3000+ CPU (AM2, 1.8GHz). In short, Xen is not accessible from amd64 Linux kernels but works fine with 686 kernels. Long version: xen-system-i386 (4.1.4-3+deb7u1) works fine with linux-image-3.2.0-4-686-pae xen-system-amd64 (4.1.4-3+deb7u1) works fine with

Hi! We (an astronomical center) are building a small cluster for our number-crunching. The problem is that we have 12 mobos A7V600 by Asus (for athlons) - 1 server + 11 diskless nodes. And here comes the trouble... hardware: mobo: a7v600 net: 1 gigabit by 3com - 3c940, integrated in mobo the problem is: dhcp - works fine tftp - works fine pxelinux.0 - downloads fine (I hope) linux kernel -

Ok I warned you that I'd been drinking! What I really meant was something to go from: [,1] [,2] [1,] 1 2 [2,] 4 3 to [,1] [,2] [1,] 4 1 [2,] 3 2 to [,1] [,2] [1,] 3 4 [2,] 2 1 to [,1] [,2] [1,] 2 3 [2,] 1 4 Sorry for being a muppet, B Begin forwarded message: > From: Benjamin Lloyd-Hughes

I''ve currently got a Xen 2 system running on a CL10000 VIA system. I''d like to upgrade to Xen 3 and make use of the hardware virtualization support in Xen (sometimes). My requirements then: 1) Cheap CPU. AMD or Intel. Must have Xen3 hardware VM support. Any speed. 2) Lower power consumption from the CPU 3) Cheap mobo to support the chip. 4) Decent raid-1 SATA support on the

I'm looking for a small formfactor mobo for an install that needs to handle 25 phone sets (no transcoding). I found a new dual atom 1.66GHz mobo - anyone know what kinds of call volume that will handle? MD

Had to replace dying cpu and mobo, so also replaced IDE with new SATA drive. Installed from latest ISO onto SATA and can't get networking to lease an IP address from my ISP (Comcast). The network utility always comes up with a private address (192.168.0.2) instead of Comcast IP. To add to confusion, if I boot into old IDE drive, I get proper network connection to internet, but lose my

Hi, I cannot get * to run on my VIA 800 mini-itx MOBO. I keep getting "ouch...broken pipe" errors. I have downloaded mpg123-0.59r and compiled it, so I know that the problem isn't there. I edited *'s Makefile and uncommented the VIA processor section before I compiled Asterisk. Can someone that's been successful with * and the VIA 800 mobo help me out? Thanks, Mike C.

On Dec 7, 2019, at 7:01 PM, Gene Heskett <gheskett at shentel.net> wrote: > > What driver do I now put in /etc/nut/ups.conf? hid-generic doesn't seem > to want to talk to it, and the original name _(usbhid-ups) doesn't work > from new mobo. Oh wait, I can't spell. But that didn't help, and a > restart gets this error: ... > Dec 07 18:49:46 coyote

Hi, I would like to ask if anyone had a success running Windows as VMX guest on a motherboard with Intel 8xx, Sis 661FX or Via P4M800 or P4M800 Pro chipsets for socket 775. I briefly succeded running Windows XP on PCChips P21G motherboard with Pentium D 930 but now starting WMX guest freezes the machine. I think it has something to do with the motherboard becaue I was not able to boot from IDE

Greetings all. I am facing serious problems running ZFS on a storage server assembled out of commodity hardware that is supposed to be Solaris compatible. Although I am quite familiar with Linux distros and other unices, I am new to Solaris so any suggestions are highly appreciated. First I tried SXDE 1/08 creating the following pool: -bash-3.2# zpool status -v tank pool: tank state:

On Sunday 08 December 2019 09:25:29 Roger Price wrote: ls -lF /var/run/nut/ total 8 -rw-r--r-- 1 nut nut 5 Dec 7 18:49 upsd.pid -rw-r--r-- 1 root root 5 Dec 7 18:52 upsmon.pid No permission if I look as gene(me) Now, I do have a /home/nut ls -l /home root at coyote:Daily$ ls -l /home total 16 drwx------ 53 amanda backup 4096 Jul 8 12:22 amanda drwxr-xr-x 72 gene gene 4096 Dec 8 12:17

These show up under Windows XP as if they are SCSI adapters (they're not, obviously.) Has there been any view towards supporting these on FreeBSD? They're on all the recent Intel motherboards for the last year and a half or so. Also, is there any particular benefit (or penalty) to running the amd64 build on Quad-Core or i7-series processors? I have an app that might benefit from

On Sat, 7 Dec 2019, Gene Heskett wrote: > /var/run/nut/upsd.pid does exist, but root is being bounced and for some > reason I can't su nut from root. Just a thought - what does ls -lF /var/run/nut/upsd.pid report when run as root? Roger

On Dec 8, 2019, at 10:26 PM, Gene Heskett <gheskett at shentel.net> wrote: > I put it back to original and restarted the nut-server. And its now > working. Go figure... >> [myups] >> #driver=hidraw >> driver=usbhid-ups >> #driver=belkin >> #driver=belkinunv >> #driver=genericups >> port=auto >> offdelay=120 >> ondelay=0 >