similar to: ping from local to net

What is the output of your logfile when you try to ping a public ip? Besides, you should change your internal ip addresses to private addresses (rfc 1918): 10.0.0.0 - 10.255.255.255 (10/8 prefix) 172.16.0.0 - 172.31.255.255 (172.16/12 prefix) 192.168.0.0 - 192.168.255.255 (192.168/16 prefix) best regards, Kenneth. -----Opprinnelig melding----- Fra: Marta

Hola and thanks for any help in advance I installed mandrake 9 a few days ago and wanted to set up some additional rules to shorewall, bu i failed :) What i want to do is basicly route any incomming udp and tcp packets on port 4665 to a workstation behind the router. router with mandrake 9, eth0 (192.168.0.1) internal net, eth1(10.0.0.0) connected to dsl modem and gets a dynamic ip

I have the problem when my localnetwork do telnet to the net Shorewall:FORWARD:REJECT:IN=eth0 OUT=eth2 my files are the following: policy #SOURCE DEST POLICY LOG LEVEL LIMIT:BURST loc net CONTINUE info loc fw ACCEPT info loc loc ACCEPT loc dmz ACCEPT info fw

-----Original Message----- From: Michael Heironimus [mailto:mkh01@earthlink.net] Sent: Wednesday, August 20, 2003 8:36 PM To: 'samba@samba.org' Subject: Re: [Samba] Viruses and the list On Wed, Aug 20, 2003 at 05:59:07PM -0700, Philip Edelbrock wrote: > I was forced to put a filter (spambayes) on my list (Lm_sensors) to > keep > out most of the garbage. It's really helped

I believe that 2.4.0 is about ready to be sent out the door. I''ve made a couple of small changes since RC2 but I don''t believe that they warrant another RC. There remains the issue of what to do about support for Shorewall 2.0 given that 2.2 has only been available since March. It would be my recommendation to make 2.4 the new "stable" release but continue to

Hi all, I am doing some research on Samba+OpenLDAP (+DHCP+DNS) with the intention of getting rid of the Micro$oft licenses necessary to maintain the Server products from such company. One of the aims I have is to demonstrate other people in my company that an open source alternative can work as well as (or even better than) a propietary solution. At the moment, I am getting desperated trying to

On a related note, are there any tools which can read the Index information from a CD and preserve these in some file for later recreation? The actual TOC on a CD has very little information: just the Absolute Start Time of each Track. Is there any documentation of the "TOC" file format that is commonly used? I do not recall coming across anything. Obviously, I am also

Thanks. I'm able to getting the asterisk calling back to my cellphone. But when I get to the authentication I get this message when I start to dial in my password: NOTICE[5178]: rtp.c:509 ast_rtp_read: Unknown RTP codec 96 received Is this a DTMF failure of some sort? Thanks again. -----Opprinnelig melding----- Fra: asterisk-users-bounces@lists.digium.com

The Shorewall CVS repository is now safely ensconced at Sourceforge. http://sourceforge.net/cvs/?group_id=22587 Please note that unlike with the old repository here at shorewall.net, at Sourceforge there is a delay in updating the ViewCVS (web) copy of the repository. As a consequence, developer commits are not immediately available for browsing with ViewCVS

Thank you very much. For some reason "emailsubject" was not included in my example config. Well, it's working great now. Last question, I promise :P. Is it possible to change the date format? I want it in Norwegian. -----Opprinnelig melding----- Fra: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] P? vegne av Barry Flanagan Sendt: 22.

I thought the same thing before I made my reply but zapata.conf seems to be the only config file that deals with echo at all. From what I understand of 'echotrain' is that at the beginning of the call it sends a short signal out that measure echo in an attempt to try and cancel it. I was wondering if you tried using it and if so was it of any help? Sincerely, Steve But is Zapata.conf

Hi, I'm trying to implement this: I have: - A windows 2000 server - A centos 4 server - Monday, Tuesday, Wednesday, Thursday, Friday, Monthly. The tape drive in the windows server died recently and I decided to switch to USB external drives. However, the USB controller in the windows server is only 1.1, so it is very slow. I didn't want to install a 2.0 USB controller in the

That 100% depends on what you're trying to access. Try accessing the /admin/ endpoint and see what you have set up there. You also need to specify a relay-stub in the xml configuration, see:?https://icecast.org/docs/icecast-2.4.1/relaying.html--MariusSendt fra min Galaxy -------- Opprinnelig melding --------Fra: "Mayiani, Martin Martine - mayianmm" <mayianmm at jmu.edu> Dato:

Yeah I did change those. I'm using 1.0.8 (Or was it 9?). It seams that the system overrides these settings? -----Opprinnelig melding----- Fra: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] P? vegne av Barry Flanagan Sendt: 21. februar 2006 14:54 Til: Asterisk Users Mailing List - Non-Commercial Discussion Emne: [Asterisk-Users] Re: Fromstring when

It's fixed now. In "/etc/mail/ssmtp.conf", this ("FromLineOverride=YES") line was commented out. Removing that comment did the trick :) Now I only need to change the e-mail's title. Is that possible? -----Opprinnelig melding----- Fra: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] P? vegne av Barry Flanagan Sendt: 22.

Hello Shorewall users I have a firewall based on RedHat 8.0 and Shorewall. I have 2 interfaces, with 2 ip address on the loc interface, the connection to the internet runs through my company''s network with an ADSL/MPLS line. I need to configure my Shorewall with the possiblity to deny some users'' access to the ''net'' for some subnet. Ex. my son''s

I also want to try that asterisk guide. But i'm not sure if i understood it correctly. What exactly do i need to do? Do i need to compile Asterisk with the spanDSP plugin or just configure extensions.conf? The URL to spanDSP in the guide wasn't working. I also use a traditional internet line to recieve calls and hopefully i will get Fax working soon. This is so confusing. Thanks, Arne

What about faxing yourself if you don't have a scanner? -----Opprinnelig melding----- Fra: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] P? vegne av Johan van Tongeren Sendt: 5. september 2005 09:11 Til: Asterisk Users Mailing List - Non-Commercial Discussion Emne: RE: [Asterisk-Users] sending fax [macro-fax-dialing] exten =>

Hmmm .. so not sure I understand what you mean by that. SO basically what I am trying to do is go to http://hostname:8000/. I have attached the error log as well. Thanks From: Icecast <icecast-bounces at xiph.org> On Behalf Of Marius Flage Sent: Wednesday, January 3, 2024 1:12 PM To: Icecast streaming server user discussions <icecast at xiph.org> Subject: Re: [Icecast] 404 - The file

I don't know if any such limitation exists, but maxing out just shy of 1Gbps sounds a bit more like an interface's line speed limited/set to 1Gbps somewhere in your production chain? You wrote that you have tested the bw - what did you use? Iperf? Speedtest?Maybe consider scaling with additional Icecast servers and use a load balancer in front? And then just scale accordingly? This sounds