similar to: Traffic Shaping - Help setting up upload bandwith limit

Hi, first of all, let me thank you for your great Shoreline Firewall. I use it with great success at home (protecting my WiFi connection). And now if I could have a question about traffic shaping. I did read everything I could find but I still have two problems: first, the MARK from tcrules is not working in HTB based simple tc filter line ("handle $MARK fw classid 1:20"). If I switch

Season Greetings to all Tom, in your faq, u have this noted: While I am currently using the HTB version of The Wonder Shaper (I just copied wshaper.htb to /etc/shorewall/tcstart and modified it as shown in the Wondershaper README), I treid this with wondershaper, using Bearing Leaf 1.0 stable i even changed the tc command to run_tc, and tried it in both angles, and i receive the following..

Hi all, I moved wshaper 1.1 cbq file to tcstart, but none of my tcrules are being observed. The only way I can set the marks is by editing the tcstart file. Is there a way to incorporate for tcstart to read and apply my set marks in tcrules? Thank you, ~Andrew Nady.

>Miguel Ángel Domínguez Durán wrote: >> Hello again, >> First, excuse me for my poor english. >> I''m trying now to make bandwith control in a firewall machine running >> Shorewall. This machine is also a bridge using bridge-utils >> bridge-utils-devel. It is a mandrake 10. The configuration is something >> like >> this: >> >>

Hi Guys, I''m asking this question again because I have exhausted resources for understanding how to get it to work. I''ve read the howto on getting traffic shaping to work (shorewall''s web site) as well as trying out wondershaper''s htb and cbq scripts. Somehow both does not seem to happen as I want it to. I''ve also read through the lartc

I don''t know whether this is the right place to ask, but kindly point me to an FM that I can R if it isn''t. My wife is creating lots of Kazaa traffic, and I am using rsync to create a full mirror of Red Hat''s FTP site, Aurora Linux FTP site, the LDP site, and some other stuff. Clearly, when one is moving well over 100GB over a 128 Kbps link, this is going to take a

I have wondershaper to limit my upload at 400kilobits (my line is 600kbps). I do a lot of torrent seeding and I dont want my pings killed when I''m uploading so I set low prority source ports as follows (by the way, I have bittornet to only use ports 6881-6910): NOPRIOPORTSRC="6881 6882 6883 6884 6885 6886 6887 6888 6889 6890 6891 6892 6893 6894 6895 6896 6897 6898 6899 6900 6901

I''m trying to shape traffic on a Devil-Linux box. This note was originally sent to their maillist, because the LARTC list appears to have been down for the past few days. My mailbox was just flooded with a half dozen or so confirmation requests in response to my repeated attempts to subscribe to this list. ---------- Forwarded message ---------- From: drew einhorn

Hi, I found that I had some thinking error with the wshaper script. I assigned the bandwith of my DSL connection to it, but the machine where it runs is normally connected to the LAN with 100Mbit behind a separate Hardware-Router.Obviously, the complete connection of the machine was slowed down to 384k because I told it so.I guess, since wshaper takes only one card as argument, I can''t

Hi everyone, I don''t know if you remember me, but i had a problem with a machine performing bridge (bridge-utils) and firewall (shorewall) duties. I wanted to control traffic in this machine using iproute2 and tc command with the tcstart and tcrules file in shorewall configuration. My machine hanged up when I used my traffic control script that way, but I found a solution :) The key

Having study a number of documents on linux traffic shaper, I started to setup my shaping rules in my network. My linux box is running RH AS3 U3, shorewall 2.0.9. It is using PPPoE connected to the Internet firewall: eth0: connect to the adsl modem eth1: private net ppp0: virtual dial up interface for pppoe There is a ftp server on the private net It is listen for port 21 and configured

Ok, shaping on Linux is new to me.. so bear with me if i am just stupid. curtain:/etc/shorewall# grep TC shorewall.conf | grep -v ^# TCP_FLAGS_LOG_LEVEL=info TC_ENABLED=Yes CLEAR_TC=Yes TCP_FLAGS_DISPOSITION=DROP curtain:/etc/shorewall# So it should be enabled, right? ---- tcrules ---- 1 eth0 0.0.0.0/0 all 2 eth1 0.0.0.0/0 all 2 eth2 0.0.0.0/0

Hello again, First, excuse me for my poor english. I''m trying now to make bandwith control in a firewall machine running Shorewall. This machine is also a bridge using bridge-utils bridge-utils-devel. It is a mandrake 10. The configuration is something like this: FTP/Webserver ------| eth0 eth1 Mailserver

Hi ! I found an excellent article about QoS and traffic shaping for VoIP (Asterisk IAX protocol), which is designed to improve sound quality even over very busy lines. http://www.howtoforge.com/voip_qos_traffic_shaping_iproute2_asterisk Should I just cut and paste all that to shorewall''s tcrules (replacing 4569 with 5060)? Additionally, author of this article uses IAX protocol,

Hi All, I have a custom TC configuration where I''m building the tc hierarchy manually with the tcstart script. I also need to add custom iptables rules in the mangle table to classify the packets. Currently I''m using started to insert the iptables commands, but that''s way too late in the process. I tried putting them into the initdone file, but it''s trying to

Greetings, I am trying to set up Wonder Shaper to work along with Shorewall 2.0.8. I have read through this document here: http://shorewall.net/traffic_shaping.htm and set the necessary options in shorewall.conf, and I coped the contents of the htb file to tcstart and changed things in accordance with the readme. Now from what im seeing, that''s all there is to it and it should work,

Hi ! I´ve been using the wonderful wondershaper from chapter 15.8 of the LARTC Howto for some time. It´s really wonderful. Actually, I use the version from http://freshmeat.net/projects/wshaper/?topic_id=87 Now I tried to put some hosts to low priority, and it doesn´t work. The traffic is splitted equally between the noprio and the other hosts. Is this because I use ip masquerading, and all

Hi, I have a question conercing wondershaper. I''m using the Clarkconnect linux distribution for my linux router and I tried to use wondershaper. On start up of wshaper, there are no errors or any other problems but I''m not sure if it''s running correctly. Only one qdisc / one class is used and when I start an uplink ftp transfer, my ping time is growing up to 1700ms - I

Hi, When i do ''wshaper start'' the interface i have defined stops routing traffic for some reason. It resumes routing when i do ''wshaper stop''. I''m using debian stable (3.0 woody) with debian''s default 2.4.18-686 kernel. When I run the script I get no errors, and when I do a ''status'', everything looks correct. Can ANYONE

Hello again, First, excuse me for my poor english. I''m trying now to make bandwith control in a firewall machine running Shorewall. This machine is also a bridge using bridge-utils bridge-utils-devel. It is a mandrake 10. The configuration is something like this: FTP/Webserver ------| eth0 eth1 Mailserver