similar to: Redirecting localhost to proxy

Hi, I am running squid as a TRANSEPARENT PROXY WITH SQUID 2.5 on CENTOS 4.5. Pls see below for squid.con file. http_port 3128 cache_mem 64 MB cache_dir ufs /var/spool/squid 100 16 256 cache_access_log /var/log/squid/access.log cache_log /var/log/squid/cache.log cache_store_log /var/log/squid/store.log # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # Example rule

I''ve installed a bering box acting as a firewall for a lan; the lan is 192.168.1.0/24 the bering box is 192.168.1.254 I''ve installed a squid server 192.168.1.1 It is possible to configure shorewall for a transparent proxy to the squid server? I''ve tryed with REDIRECT loc loc:192.168.1.1:3128 tcp www - !192.168.1.1 in the rules file I get this error: Error:

Hi all, I''ve just built Mandrake 10.1 on a Compaq Deskpro that I''ve built as a router/firewall and am redirecting port 80 outbound to force users through the Content Filter. I''ve run this setup on Mandrake 9.0 and 10.0 without any problems but this time the following happens. Squid is accessed through port 3128 and Dansguardian via 8080. If I set my browser on a

Hi. I have two internet connections, the ADSL2+ is very very cheap (but fast 10mb) and I want to use the SHDSL (2mb) only for mail,ssh,http OUT and the ADSL2+ only for surfing. I all works fine if people specify the proxy in the browser, but in case like flash it of no use. Further if I can make the 80/443 traffic go through the proxy only, its an added bonus. If this can be done, fine. Bue I

Hi all, is it possible configure Shorewall in bridge mode and, in the same box, utilize Squid in transparent mode? I''m triing to do this, but the REDIRECT rule doesn''t work. I''ve already read http://www.shorewall.net/bridge.html to configure the bridge and work fine for me, but when I add the rule for transparent proxy

i''m using one line on eth2 only for web traffic eth1 is my internal line and eth0 is my main line to internet . i''m marking packets like this i have default route on eth0 iptables -t mangle -A PREROUTING -i eth1 -p tcp --dport 80 -j MARK --set-mark 66 iptables -t mangle -A PREROUTING -i eth1 -p tcp --sport 80 -j MARK --set-mark 66 iptables -t mangle -A PREROUTING -i eth1

Greetings, I installed a squid 3.1.10.i686 squid to a centos 6.2i686. The proxy is working fine with the default config. After I decided to use it as a transparent proxy, I added two lines to config: http_proxy 10.0.5.1:3128 transparent, always_direct allow all http_port 10.0.5.1:3128 transparent # # Recommended minimum configuration: # acl manager proto cache_object #acl localhost src

Hello, I've got a centos5 box that is now behind a what was transparent squid proxy. The proxy now has it's own dedicated ip and uses proxy basic authentication. I've got a firewall that redirects all outgoing port 80 traffic to that ip so anyone wishing access goes proxied. The problem is yum on my centos5 can't retrieve the .xml files for the various yum repositories. In

Am 11.03.2018 um 11:53 schrieb Nicolas Kovacs <info at microlinux.fr>: > > I've experimented some more, and I have a partial success. Here, I'm > redirecting all HTTPS traffic *except* the one that goes to my bank: > > iptables -A PREROUTING -t nat -i $IFACE_LAN -p tcp ! -d > www.credit-cooperatif.coop --dport 443 -j REDIRECT --to-port 3129 > > This works

Hi, I followed the instructions posted on the shorewall web page for transparent proxy, but I still cannot get it to work. I have almost the same setup as described on the web, running squid on dmz, eth1, and the loc on eth2. I can see that packets going out from the fw, they are not sent to the squid proxy, and if I try to telnet to the squid proxy to port 80, where I should be directed to

My computers at my office will no longer be able to connect directly to web sites etc. I will be going through a proxy server. The particular server is running squid on port 3128. I have managed to configure web browsers, ssh, apt, svn and a whole lot of other tools to use the proxy server but I haven't been able to configure rsync. My usual method of updating my copy of the R-devel

Hi, I'm currently facing a quite tricky problem. Here goes. I have setup Squid as a transparent HTTP+HTTPS proxy in my local network. All web traffic gets handed over to Squid by an iptables script on the server. Here's the relevant section in /etc/squid/squid.conf: --8<------------------------------------------------------------- # Ports du proxy http_port 3130 http_port 3128

Hello ! I have installed and configured squid(last version) transparent proxy and i am using shorewall(last version) as a firewall. I have redirected all of my local network''s http requests to the squid port(3128). But, from my local net i cannot ping a remote machine on the internet using his hostname like google.com. I could do it only when i use a ip address. All of computers in the

ive got a config thats client -> server ->Dansguardian->Squid -> onward adn I want to transparently redirect web traffic to DG/Squid Not sure where the problem lies - hoping you guys can help me and at least tell me that its NOT my shorewall config heres the configs When I point a browser straight at 3128 or 3129 I get web pages back and the appropriate stuff in the logs . I get a

Hi all, I am trying to configure squid as a interception HTTPS proxy under CentOS 7. At every https request, I am receiving a certificate error. My current config for squid is: # My localnet acl localnet src 172.22.55.0/28 acl localnet src 172.22.58.0/29 acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70

Hello Group I am trying to set up a demo of Squid at my location to to a person that has proxy ports blocked on his firewall at his location by having him set his IE Browser set to use proxy server 64.42.49.235 port 80. My thinking was to set up a rule in shorewall which redirects port 80 to 3128 as in a local setting. My test server is running rh 7.3, Shorewall 1.3.14 with one interface

Hallo, I got a problem (I think it''s not a Problem, I am just to stupid to manage it) Iwant my Server (eth1: addr:10.0.123.1, Local Zone), eth0 is connectet to the Student-Network (addr:172.16.129.106 Mask:255.255.248.0 gateway: 172.16.128.1, Net Zone), to forward all packages from port 80 on local Zone to www-cache.uni-halle.de:3128 (172.16.128.1:3128) because I have to use this

Hi, I am trying to redirect my subnet thru squid and it seems to be working. However I decided tu exclude two hosts from the redirect (ie acces the net directly) and can''t manage to achieve that. I am using the following rule: REDIRECT loc:!192.168.13.48,!192.168.13.200 3128 tcp 80 - With this rule everything gets redirected thru squid. I also tried:

Hi all, I''ve been using shorewall 3 (3.4.8 now) for a while on a simple gateway setup for my office. Routing is enabled only for a few hosts and all user access the internet thru squid, which is running on the shorewall box. I have a few other services on this box and some others on another server, but they don''t matter for what I need. Quick and dirty schematics to illustrate

Hello, I''m not sure if this has been asked before but I would like to ask assistance for this problem I have. I installed gentoo for my firewall/gateway and installed dhcp and shorewall. Currently, I can ssh, ftp, remote desktop connect, ping, etc (anything I can think of) from an internal computer inside my network to an external IP, except I cannot surf the net. I can ssh/ftp to