similar to: 2 internet ip numbers on eth0

Hello everybody: Here is my "network layout": ISP1 ISP2 | | | | +-----eth0---------eth1------+ | | | FC 3 box | | | +-----eth2---------eth3------+ |

Hi, I have a simple question. I have my firewall with 2 external Ip and 1 lan. For example ISP1 FW LAN----Mail Server ISP2 Ok, when i DANT the smpt port to my mail server, I can see that the conection in my mail server comes from the external IP of my ISP. I need to change this so the conection to my mail server cames from the LAN IP from my firewall Is this possible?

Hello, Thanks for the great Shorewall which has replaced my hard to maintain home-made scripts. First, what works. Our local network is 10.48.X.X with multiple vlan, each on a dedicated interface. We use Shorewall 4.4.11 from Debian Squeeze. We have a 2 ISP: - isp1 : an optical fiber provider with 10 Mbps. - isp2 : a DSL provider with 15Mbits/1Mbits. We use isp2 as the default outgoing

Hi there. Currently, our network design has two ISP lines and 3 subnets for LAN. Below are some details :- eth0 - isp1 eth1 - isp2 eth2 - subnet1 eth3 - subnet2 eth4 - subnet3 What i wanted to do is to assign incoming port 80 to our local squid server running on the firewall itself and assigned it to eth0(ISP1). I think it shouldnt be a problem as /etc/shorewall/rules provides a sample of the

Dear list, Shorewall is running here with 2 ISP''s: ISP1: corporate ADSL-line with fixed set of IP''s ISP2: fast consumer-grade cable-connection with higher bandwidth All our main traffic (web, e-mail) is routed trough ISP1. Only for special purposes (frequent large ftp-transfers) ISP2 is used, configured trough tcrules. ISP2 is not so reliable as ISP1 (duh) and they sometimes

Hi, is it possible to have 2 different ISP in one server? i have 2 NIC cards im going to config ISP1 in NIC1 and ISP2 in NIC2? what should be the configuration for this setup? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20070412/4c62019f/attachment-0004.html>

Hello,I have single linux router ( fedora core 1 ), 2 ISP, 1 internal network,1 IP space from every ISP My scenario: eth0 1.0.0.2 netmask 255.255.255.252 -> ISP 1 eth1 2.0.0.2 netmask 255.255.255.252 -> ISP 2 eth2 1.0.1.1 netmask 255.255.255.0 -> IP space from ISP1 eth3 2.0.1.1 netmask 255.255.255.0 -> IP space from ISP2 Config I try: /etc/iproute2/rt_tables: 10 isp1 20 isp2 ip

I need to route: from 196.33.50.0/25 (default route) to ISP1 from 196.33.248.0/24 (default route) to ISP2 ISP1 --------- fire --+---- 196.33.248.0/24 / | ISP2 --------/ +---- router ----- router ----- 196.33.50.0/25 What I''ve done: Default route via ISP1 created routing table ISP2 for default route via ISP2 I would like to do the following but they get

Hi, I have 2 internet nic''s with differents ISPs. eth0 = isp1 eth3 = isp2 My internal network is eth1 # /etc/interfaces net eth0 detect routefilter,norfc1918,blacklist net eth3 detect routefilter,norfc1918,blacklist loc eth1 detect # /etc/policy loc net ACCEPT net net DROP

Hello, it seems I am hit by http://shorewall.net/MultiISP.html#Local : "Experience has shown that in some cases, problems occur with applications running on the firewall itself. This is especially true when you have specified routefilter on your external interfaces in /etc/shorewall/interfaces (see above). When this happens, it is suggested that you have the application use specific local IP

Hi, At office, we have I ISPs. I want to lightly monitor each link latency in order to decide several routing. For that, I have only one external server: 1 IP, it's an OVH dedicated server. The quick picture is http://s24.postimg.org/n3436z64l/defaul_route.png Default route is via ISP1. If OVH-server pings IP1: - the request will go through ISP1: it's OK - the reply will go through

I''ve just started to recently look at CBQ and HTB, but I''ve been wondering whether or not something like the following is possible: I''ve got two external links: +--+ | |-----ISP1 |FW| | |-----ISP2 +--+ One link has a bandwidth cap, and the other doesn''t. What I want to do is, punt all outbound traffic out via ISP1

I set up this config: +------+ -+ ISP1 +--+ +------+ | +-------+ +--+ linux | +------+ | +-------+ -+ ISP2 +--+ +------+ No problem. Standard setup with two ISP''s. Both routed subnets. Default gateway is ISP1. No magic here. Now I put a server behind the Linux box. I want the server to be reachable on an /extra/ IP in the routed subnet of ISP2. +------+ -+ ISP1

Hi, I want to configure QoS in my shorewall conf but I have a doubt. Now I am using tcrules with prerouting and with the file providers, like this. 2:P 192.168.0.11 0.0.0.0/0 tcp 25 So, with this way I route my smtp traffic with my provider number 2. Well, now I want to configure QoS with tcclasses and tcdevices, but if I do that I need to use the MARK in the tcclasses So, how

hello, i have 2 links to the ISP of 128kbit each, and i want to balance the trafic between them, but not staticly (local ip1-5 throw isp1, and the rest to isp2). I though at a ingress clasification, then routing by the mark, and at the exit nat (yes i must do nat :(((, but the clasification must be flow based, and i dont know how to do it. C _______________________________________________ LARTC

Dear all Lartc, I try to split my Internet access to my 2 ISP with 1 linux (GNU/Debian sarge) 3 NIC router, I want all my users conneted with ISP1 and just some IP connected with ISP2 Here is my configuration: Internal network: 10.117.71.0/24 Interface eth0 ISP1: IP for my linux box: 1.2.3.4/29 Interface: eth1 Gateway: 1.2.3.5 ISP2: IP for my

Hi; I have two dsl lines, which the low bandwidth connection(ISP2) is only used for failover. My setup is showed below; \ ISP1 \ / \ ____/NAT My internal net |-----|___| / \NAT / \ / ISP2 However, my interfaces which these lines are connected are both

0 *H 010 +0 *H $Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit Hi ALL, I''m new to TC and IPTABLES and i need help in setting up a filter/routing solution to an ISP. I''ve read all the HOWTOs and i''ve reading LARTC messages for a month now. I still don''t have a clue on how to do it ''cause sometimes people say

Here''s my situation: I''ve got an Intel machine running a 2.6.9 linux kernel and this box has 4 modems attached to it via a usb to serial port expander. In order to force data down each of the modems, some pretty simple rules are used and they are as follows: iptables -t mangle -A OUTPUT -p tcp --dport $PORT1 -j MARK --set-mark 1 iptables -t mangle -A OUTPUT -p tcp --dport

Hello! I have set up a LINUX router with two seperate uplinks to do load balancing. I made all the configuration after the "NANO-HOWTO to use more than one independent Internet connection" document. I patched my 2.4.24 kernel with patches, described in this document. My configuration is: --------------------------------------------------------------- #!/bin/bash