similar to: asrock 775 dual-vsta mb and linux with sata raid

Hi, I have just upgraded my computer to Intel Core i5-4430 Quad Core @ 3.0 GHz (supports VT-d), ASRock B85M Pro4 micro-ATX LGA1150 motherboard (supports VT-d), 8 GB Kingston DDR3-1600 memory and Cooler Master Elite 311 ATX casing (all for SGD$501). I made my computer upgrade on Independence Day 4th July 2013. I have also flashed the UEFI BIOS of ASRock B85M Pro4 motherboard to version 1.50.

I have opened the case of the server and it's LSI card with FakeRaid !! What I have to do now as lspci shows it as intel cards?

Alle, I was wondering if anyone is using 4.X on any Fujitsu Primergy hardware and what type of experience they've had. I know that FJ provides separate drivers for all the supported hardware that are supposed to be RHEL4.X compatible, but I have my doubts. Best Regards, Camron Best Regards, Camron -- Camron W. Fox Hilo Office High Performance Computing Group Fujitsu America, INC.

On 7/30/2016 6:56 AM, Fawzy Ibrhim wrote: > # lspci -nn > 00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port [8086:3406] (rev 22) > 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 22) > 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 22) >

dmesg output has been pasted to http://paste.fedoraproject.org/409669/47144402/

Hi List I'm trying to update to the lastest kernel but I have a dirver that is not inculded in the distrubution, and I had to use the driver disk when installing centos 4.4 in the first place, The driver megasr .ko works fine with the installed kernel but I cannot find on for the updated kernel, any adive would be appreciated. without the updated driver there is a kernel panic on boot due to

On 8/17/2016 7:46 AM, Fawzy Ibrhim wrote: > There's no option in BIOS to disable the RAID mode; this is NEC servers !! huh. i've never seen anyone using the lsi megaraid firmware with intel SATA ports, so thats two things weird about NEC, kinda glad I don't ever see those. -- john r pierce, recycling bits in santa cruz

I think this is new since a previous version of R: > h <- function(x, trantab) trantab[x] > w <- 6:4 > names(w) <- c('cat','dog','giraffe') > w cat dog giraffe 6 5 4 > > formals(h) <- list(x=numeric(0), trantab=w) > h function (x = numeric(0), trantab = c(6, 5, 4)) trantab[x] You can see that the names

Hello, I am using dovecot as an imap server, mail is stored in mail directories. Configuration is below. One mail directory has about 14 Gb of mail in the inbox and .Sent directories. Searching from an Android phone with gmail is slow or doesn't work (it times out). Is there a configuration for Dovecot that can improve this? A better e-mail client for Android? Thanks, John root at

Hi, I am trying to create a report across all my KVM hypervisors using libvirt API and I need some assistance in figuring out the right API calls. My report will contain the total available memory, CPU, disk across all hypervisors, versus the amount used by the virtual machines. This report will help figure out if we are running low on hypervisor disk, CPU or memory and if we need to add more. I

Hi Andi, This is a set of updates for the firstfloor patch queue. Quick rundown: revert-mm-x86_64-mm-account-for-module-percpu-space-separately-from-kernel-percpu.patch separate-module-percpu-space.patch Update the module percpu accounting patch fix-ff-allow-percpu-variables-to-be-page-aligned.patch Make sure the percpu memory allocation is page-aligned

Hi Andi, This is a set of updates for the firstfloor patch queue. Quick rundown: revert-mm-x86_64-mm-account-for-module-percpu-space-separately-from-kernel-percpu.patch separate-module-percpu-space.patch Update the module percpu accounting patch fix-ff-allow-percpu-variables-to-be-page-aligned.patch Make sure the percpu memory allocation is page-aligned

Thanks --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 0650-2, 23/11/2006 Tested on: 26/11/2006 1:27:17 PM avast! - copyright (c) 2000-2006 ALWIL Software. http://www.avast.com _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

On 11/16/2020 01:23 PM, Jonathan Billings wrote: > On Sun, Nov 15, 2020 at 07:49:09PM -0500, H wrote: >> I have been having some problems with hardware RAID 1 on the >> motherboard that I am running CentOS 7 on. After a BIOS upgrade of >> the system, I lost the RAID 1 setup and was no longer able to boot >> the system. > The Intel RST RAID (aka Intel Matrix RAID) is

Andreas- On Thu, Apr 3, 2008 at 8:31 AM, Andreas Rogge <a.rogge@solvention.de> wrote: > Do you have SELinux enabled? When starting puppet from init.d with SELinux enabled it runs in xinitrc_t while it should (at least imo) run in unconfined_t. Running in xinitrc_t lead to *really* strange things. Everything way fixed once I deployed a policy that made puppetd run in unconfined_t. >

Hello. I'm setting up a computer that will run 'CentOS 6 server'. The MB is an Asus with a hw raid controller (Promise PDC-20276), which I want to use in RAID-1 mode. I noted (from a MB website) that it also needs a driver - which is probably why it's called a 'fakeraid'. So, I've been trying to determine if any recent kernels support this chip. Using

I have had great luck with nvidia fakeraid on RAID1, but I see there are preferences for software raid. I have very little hands on with full Linux software RAID and that was about 14 years ago. I am trying to determine which to use on a rebuild in a "standard" CentOS/Xen enviroment. It seems to me that while FakeRaid is/can be completely taken care of in dom0 dmraid whereas with

Hi A server has FakeRAID installed, I want to remove it to make it mdadm driven .... If I delete the FakeRAID including - disabling it in the BIOS - removing the dmraid driver from initrd - deleting all meta data from partitions - deleting all dmraid packages is the data still available on the drives, i.e. the partitions, filesystem and files are still ok? I know that FakeRAID controller

I just installed Centos 4.4 and performed a Yum update to freshen all out-of-date files. I also have two IDE drives that are NTFS partitioned, but noticed they are not seen by the kernel. I visit /usr/src/kernels/2.6.9-42.EL-i686 and copy the Makefile.bak to Makefile and run make xconfig. Reviewing the supported filesystems, ntfs is not selected. Any reason why not? What is the easiest and

I am considering buying a small, and therefore easily portable, computer as an alternative to the laptop I already have. Obviously it would not have battery, a screen, nor a keyboard etc. but more or less be an easily portable computing unit to move between offices where a keyboard and monitor(s) could then be connected. I want to run CentOS 7, later CentOS 8. The smaller, the better, however,