similar to: Oracle SQL*Net through Shorewall

I have a firewall running Shorewall 1.3.13-1 from rpm on a redhat 7.3 box. The box has three nics assigned to zones loc net and dmz. We also have multiple vpn links accomplished via ssh tunnels, These links all come from dynamic IP addresses with known private subnets behind them. There are basically two types of networks these vpns connect, one with access to almost everything and one with

Hello all, I''ve read the shorewall guides and browsed through the mailing lists, but I haven''t been able to find out if the following is possible or not using shorewall. Our provider has given us 16 IPs + 4 in a separate range for our uplink. I would like to replace that router with a Linux box running shorewall with three interfaces. I want the DMZ to be a standard, routed

Hi, I have multiple ppp interfaces that does not correspond to the same network usage. Do you know anything about trying to set definitively the ppp+ name ? or anything to adapt automagically iptables to the real network which is behind each ppp+ interface ? I''ve tooken a look into the IFNAME env var... but it doesn''t seems to work :c/ regards, -- BeTa

Hi, I''m a long time shorewall user and I like it very much. There is only one thing were I''m not always happy with: the config files. There has been discussion on the list about the comments in the files. My concern is that I loose overview over my configuration because of the many config files. Of course there are advantages too but I thinking wether another config format would

breakdown of what iam doing ok i have access to 6 ips and i want to run all of them through my firewall ifconfig eth0 209.159.32.162 netmask 255.255.255.0 up ifconfig eth0:1 209.159.32.163 netmask 255.255.255.0 up that sets up the network card to have 2 address well in shorewall i tried to add eth0:1 to my interfaces well it says that Determining Zones... Zones: inet inet2 loc cust vpn1

I have an access-IProm my isp that I configured my eth0 with. And I also have an IP-range assigned from my ISP that will be used on my servers connected to eth1. The IP-range is routed thru the access-IP. This is how my configfiles look like. Internal everything seems to work but not external. /etc/shorewall/proxyarp #ADDRESS INTERFACE EXTERNAL HAVEROUTE

My sincere apologies to all on this list. After looking for returning packets with tcpdump and not finding ANY I called our provider to confirm our IP assignment. The IP range that I was given by my boss was incorrect. After adjusting the ip assignments, everything is working perfectly. Thank you all for your time in troubleshooting this, and I hope to be able to return the favor at some

Hello Mailinglist, please excuse my bad english - but I am not a native speaker. My Network looks like this: Internet --- dyn. IP --- Firewall (shorewall) --- LAN (192.168.X.X) No I try to connect my iphone (from mobile Internet G3) over VPN (l2tp/ipsec) with the firewall. But I can´t open the necessary Port 1701. /var/log/syslog ... Dec 30 00:24:29 router kernel: [226128.293757]

I''ve had some issues with my network, and I''ve had to reconfigure my Gibraltar CD. It runs shorewall 1.4.8, and I have a 2-interface setup, so I downloaded the relevant files from the install page. Masq and such works, but I''m having a problem with my port forwarding. It works for port 22, but it doesn''t seem to work for any other port. I''ve turned

We''ve just upgraded to a new firewall machine, and a new version of Shorewall. We''re now on 2.04; previous version was 1.3.9b (!). So I''m pretty sure whatever problems we''re having are related to the big version jump. We''re using config files that exactly match our old (working) configuration (IOW, these are things which _were_ working on the old

I see support in shorewall for the KAME-tools, how about strongswan ? I have setup shorewall 3.4.4 and strongswan 4.1.3, making this my vpn-gateway for the subnet behind it. # Shorewall version 3.4 - Zones File #ZONE TYPE OPTIONS IN OUT # OPTIONS OPTIONS fw firewall fil ipsec mode=tunnel mss=1400 net ipv4

Hi, i wonder if there is any need to install shorewall on a machine located in the dmz zone of shorewaal. ( 3 interfaces example) mess-mate -- You are a fluke of the universe; you have no right to be here. ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE

Hi all, I have set up a working OpenVPN2 connection between my Server and my gateway at home. Now I want all traffic to be routed through this VPN connection. Currently everything is going through eth1 to the internet (to the gateway of the University which forwards it to the internet :-). We must use a prox-server and because of this I am not abel to watch the real-Media streams on

i am doing a clean install on fedora core 2 using the shorewall rpm and the Shorewall Setup Guide for multiple IP''s using a stock configuration except for AllowDNS and AllowWeb on the firewall (so i can post this message). my shorewall status file is attached. my setup 69.17.65.105 = firewall 69.17.65.22 = dmz server 1 69.17.65.161 = dmz server 2 my local network is

Hí everybody, you have a nice day. I am configuring accounting in shorewall /etc/shorewall/accounting and the traffic between eth0 (local network)1, eth2(local network2) and eth3(local network3) <--> eth1(ip public network), works fine. I make the accounting because y want to control the remote vpn access(pptpd) throught shorewall. Which is the way to control vpn /ip/access in

I have a NetGear FV318 living in my DMZ, with one of its LAN-ports living in my LOC zone. What rules are needed in shorewall to allow a certain subnet to make connections to this device from the net zone? Do I define it as a tunnel in shorewall/tunnels, or do I just allow some selected traffic to the DMZ IP? I am not sure which of the docs are right for me in this case?

I''m having another little problem with my new firewall. I want outgoing port 25 from my mail server to appear on the address 65.223.121.227 so I created the file masq: eth2 192.168.124.18 65.223.121.227 tcp 25 eth1 eth5 eth1 eth3 eth1 eth4 eth1 == net0 == 209.189.103.196/27 eth2 == net1 == 65.223.121.237/28 eth3 == dmz0 eth4 == dmz1 eth5 == loc ==

Hello I got about 20 different people using 20 different PC''s in my Lan. Five of them should have unrestricted access to the internet any time of the day. Yet the rest of them should only have access at certain timeframes during the day. Two of them should have no access at all. I am well experienced in writing rules (for the rules file) that make all this possible, yet i was

Hello, I have read the getting started guides, FAQ, etc, so if your response to the following is RTFM, please at least refer me to the appropriate one :) I have shorewall set up as follows: zones: net Net Internet loc Local Local networks dmz DMZ Demilitarized zone policies: loc net ACCEPT dmz net

i have no idea how to definie for a parallel zone the host file if the second zone (net) should be the composition of the first zone (dmz). i tried all the following combinations in the interface and host files: interface: - eth0 - (variante 1) - eth0 192.168.0.255,255,255,255,255 (variante 2) - eth0 192.168.0.255,!192.168.0.255 (variante 3)