similar to: sane network scanning problem

Hi, I'm new to nut, just installed it. I configured it using the hidups driver to work with my APC BackUPS: # upsc apc350@localhost battery.charge: 100 battery.runtime: 885 battery.voltage: 13.5 driver.name: hidups driver.parameter.port: /dev/usb/hiddev0 driver.version: 2.0.0 ups.delay.shutdown: -1 ups.delay.start: 0 ups.load: 660 ups.mfr: American Power Conversion ups.model: Back-UPS CS 350

I am unable to get a my Draytek working with our Asterisk server. I can make/recieve calls but get no audio. I have tried the various codecs at the Vigor end but still getting nothing. I looked at sip debug (below) but am new to Asterisk and don't really know what I am looking for. Asterisk works fine with XLITE so I know my installation is ok. Sip read: INVITE

Hello! I have a problem using shorewall on an aliased interface. Let me give you a short description of the setup: eth0 uses DHCP and will be assigned a 10.38.0.0/16 address by my ISP; I use a host-route to access their PPTP on 10.0.0.138 with "pptp 10.0.0.138" ppp0 is the Internetconnection then (duh) At the same time I want to connect the box to my LAN using 10.1.0.0/16 or any

https://bugzilla.mindrot.org/show_bug.cgi?id=2894 Bug ID: 2894 Summary: Set UpdateHostKeys for interactive sessions to 'ask' (or consider defaulting to 'yes') Product: Portable OpenSSH Version: 7.7p1 Hardware: Other OS: Other Status: NEW Severity: enhancement

Hi all, I'm trying to get the unix extensions working in AD. I'm obviously missing something, but I can't see what... I've just created user Jim (ADUC) and added a uidnumber (ADSIEdit). From this and what I have below, user Jim should have uidNumber of 12345 (from AD) and not be prefixed with Domain name. This isn't happening. Does anyone have any idea why not? cheers, Jim

Hi iproute2, I have a network to reach which is 192.168.2.0/24. It is a branch of the company. I have currently added a route to that network via one gateway ( 192.168.0.254) in following way. ip route add 192.168.2.0/24 via 192.168.0.254 Now, We got another gateway which is 192.168.0.250. Now I want to add a route to the same network which is 192.168.2.0/24 via this gateway ( 192.168.0.250)

Hello all: I''ve got a confusing issue. I had a working shorewall configuration (based on the two interface model) using DNAT for redirection to my HTTP server. The HTTP server is on my inside network (I know - bad juju, but one thing at a time). I changed my configuration this morning to use views in my BIND (named) configuration. Everyone outside the firewall is able to get in

Hello, I''m trying to debug an issue with rpc.metad on Solaris 10, basecally I believe the failure path is - svc_init -- check_sys --- check_host ---- strcmp(hostname, mynode()) It seems that for some reason hostname and mynode didn''t match then I would like to use dtrace to show the argument of the strcmp However the dtrace pid provider can''t trace functions

Dear R Helpers, I have run into a problem trying to perform a number of actions on a set of quantmod data objects through a loop and I am hoping that this is an easy problem for someone else as opposed to very difficult for me. The example task is to get the first three objects of the quarterly balance sheet for a number of companies from the getFinancials object and put them together into a

Hello, I have a small problem with dovecot 1.0RC2. This didn't happen with former versions. There are imap processes that are left open a long while after the client disconnected. I am running dovecot on OpenBSD 3.8. Below is the output of a process list. As you can see, there are many imap processes for the same login running. simon 11593 0.0 0.1 924 1140 ?? I 12:21PM

Hi there, Background: Samba 3.6.6 compiled from source on Debian Squeeze using the Debian- installed Kerberos (1.8.3) libraries. Running in an Active directory domain with mixed Win2k Server and Win2k3 Server DCs. Yes, I've been trying to persuade them. Both WINS and DNS name resolution work on the system. Samba uses the DCs for WINS, and the DCs are also name servers with an additional

Hi, I installed the shorewall 1.3.8-2 debian package to my debian testing machine which serves as the gateway to the internet. Since I have two other machine connect to internet thru this gateway machine, I also downloaded the configuration guide for "basic two-interface firewall" and followed the instructions. When I try to start the shorewall I get the following message and can not

Hi there, I manage a Samba installation which has been operating very well on Debian Wheezy for a number of years. Up until last week I was running 3.6.25, which (as always until now) I compiled myself. Because of the large number of changes in the recent security patches, I opted to try the Debian 'samba' and 'winbind' packages. I was a little horrified to find that Debian is

Hi everybody I have a Problem with Masquerading from my local net (loc) to my VPN (loc2). I can reach every Service from loc2 in loc, but I can''t get reach any service from loc in loc2. Has somebody an Idea where my mistake is ? Without shorewall, it was working. Thanks for helping Lars Technical Information : Shorewall 2.0.13 Suse 9.0 *177.177.77.X The first 3 Counts are changed

Thanks Rowland, I am trying to setup an AD member server. I followed the wiki (https://wiki.samba.org/index.php/Setup_a_Samba_AD_Member_Server). I am on Fedora 21. The domain join succeeded But wbinfo fails: $ wbinfo -u Error looking up domain users I tried to increase windbind log verbosity to 10, but I can see no trace when issuing wbinfo: /etc/smb.conf log level = winbind:10

Hello, My server is running kernel 3.10.0-1062.12.1 in a CentOS Linux release 7.7.1908. Since some weeks ago, server is restarting after XFS errors. Logs in /var/crash reported this information: [...] [443804.295916] sd 0:0:0:0: [sda] FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [443804.295919] sd 0:0:0:0: [sda] CDB: Read(10) 28 00 04 53 e8 b0 00 00 28 00 [443804.295922]

Hi, I have a small home LAN consisting of four PC's: one old Pentium III box acting as gateway / connection handler / printer server / file server / scanner server, and then one desktop and two laptops. I recently migrated this LAN from Slackware 10.2 to CentOS 4.3, and everything runs rather fine. One thing I have some trouble setting up is my Canon Perfection USB scanner for network use,

What is this all about? Seems to be related to my attempt to load hplip-3.10.9 to support an HP Photosmart 3210 all-in-one for scanning through saned. from /var/log/messages: Jan 31 20:07:26 desk python: [2851]: error: dbus failed to load (python-dbus ver. 0.80+ required). Exiting... Jan 31 20:07:49 desk python: hp-systray[3402]: warning: Qt/PyQt 4 initialization failed. When I check for

This is a minor release of Shorewall. WARNING: This release introduces incompatibilities with prior releases. See http://www.shorewall.net/upgrade_issues.htm. Changes are: a) There is now a new NONE policy specifiable in /etc/shorewall/policy. This policy will cause Shorewall to assume that there will never be any traffic between the source and destination zones. b) Shorewall no longer

> You can ignore anything after 'Join failed', the join error has already > happened and it looks like a replication problem. Does the first > Nameserver in /etc/resolv.conf point to the first DC ? > How is /etc/hosts setup ? > > Rowland /etc/resolv.conf ----------------------------------------- # Generated by NetworkManager search privatedomain.com nameserver