similar to: Redirect 80 to 3128

The rule: ACCEPT loc $FW::3128 tcp www doesn''t work propertly, the http access does not redirect to squid but directly exit. what''s wrong? Thanks ------- Dario Lesca (d.lesca@ivrea.osra.it) -------------------------------------- @@@@@@@ this is my shorewall-1.2.13 config: #[/etc/shorewall/common.def]-----------------------------------------------

Tom, I am NOT subscribed (yet). I dropped SuSeFirewall2 in favor of shorewall to get past the configuration hurdles I as experiencing. At the moment, when my SuSe 9.1 starts up, I can see shorewall processing the rules, policies, etc. and I see no errors and then moves on with the rest of the SuSe boot process . However, no traffic passes through using the rules. I run an iptables -L and I

I''m beginning to believe that the use of the last column in the rules file to designate redirection/forwarding is too subtle for many users. For 1.3, I think I''ll do something like the following: Current rule: ACCEPT net loc:192.168.1.3 tcp 80 - all New rule: FORWARD net loc:192.168.1.3 tcp 80 Current rule: ACCEPT net fw::3128 tcp 80 - all New rule: REDIRECT net

Hello, I''m not sure if this has been asked before but I would like to ask assistance for this problem I have. I installed gentoo for my firewall/gateway and installed dhcp and shorewall. Currently, I can ssh, ftp, remote desktop connect, ping, etc (anything I can think of) from an internal computer inside my network to an external IP, except I cannot surf the net. I can ssh/ftp to

Hi all, I''ve just built Mandrake 10.1 on a Compaq Deskpro that I''ve built as a router/firewall and am redirecting port 80 outbound to force users through the Content Filter. I''ve run this setup on Mandrake 9.0 and 10.0 without any problems but this time the following happens. Squid is accessed through port 3128 and Dansguardian via 8080. If I set my browser on a

Hallo, I got a problem (I think it''s not a Problem, I am just to stupid to manage it) Iwant my Server (eth1: addr:10.0.123.1, Local Zone), eth0 is connectet to the Student-Network (addr:172.16.129.106 Mask:255.255.248.0 gateway: 172.16.128.1, Net Zone), to forward all packages from port 80 on local Zone to www-cache.uni-halle.de:3128 (172.16.128.1:3128) because I have to use this

Hi, I followed the instructions in the section "Squid (transparent) Running on the Firewall" on http://www.shorewall.net/Shorewall_Squid_Usage.html to setup Squid transparently on a Linux gateway. My net is as follows: loc subnet --- fw Linux Gateway --- ADSL router 192.168.1.0/24 192.168.1.92 (eth1) WAN.WAN.WAN.2 (gw = WAN.WAN.WAN.WAN (eth0) 192.168.1.92) (gw =

Hi all, is it possible configure Shorewall in bridge mode and, in the same box, utilize Squid in transparent mode? I''m triing to do this, but the REDIRECT rule doesn''t work. I''ve already read http://www.shorewall.net/bridge.html to configure the bridge and work fine for me, but when I add the rule for transparent proxy

I have a setup something like this: WWW -- ADSL Router -- Gateway -- LAN 10.0.0.2 --> <-- 10.0.0.1 192.168.0.1 --> <-- 192.168.0.X Shorewall Squid proxy On the gateway, shorewall is sucessfully redirecting port 80 from the LAN to the proxy on port 3128. Is it possible to also redirect

Hi everybody. We are running Shorewall and Squid on Suse on the same box. Each is working fine independently, but we can''t get them to cooperate. The access log in squid shows no requests when Shorewall is on. Here are all the changes we made in the configuration files. Everything else is the same. We have read through the mailing list and the guide, but still haven''t figured it

>If you > >a) Have the correct REDIRECT rule (which you do); and >b) Are accepting $FW->Net HTTP traffic (which you are -- at least with your >policy); and >c) DNS works from your firewall (I assume it does since you are wide open >from $FW->Net); then >The problem is in your Squid configuration (this is true in %90 of the >reports on this list where Squid

I''ve installed a bering box acting as a firewall for a lan; the lan is 192.168.1.0/24 the bering box is 192.168.1.254 I''ve installed a squid server 192.168.1.1 It is possible to configure shorewall for a transparent proxy to the squid server? I''ve tryed with REDIRECT loc loc:192.168.1.1:3128 tcp www - !192.168.1.1 in the rules file I get this error: Error:

Hi, I want to automate some of the maclist and rule functionality: User connects to the network and gets a DHCP address from the shorewall box. Using squid and redirection, all the user can do is go to a login page on the firewall User logs in correctly to the form on the webpage and a process captures MAC and IP address info from the dhcpd.leases file Once authenticated, a maclist entry and an

Hi, I''m a home user who doesn''t understand the workings of the Shorewall firewall (or the linux OS on which I''ve just installed it) very well. Having just installed Shorewall 1.4.6c with a default "home user" configuration I gave it a run against the online ShieldsUp scan. Main surprise was that the ICMP echo was enabled. I''ve since gone into

I recently setup shorewall on my freshly rebuilt router box. I setup transparent proxying using transproxy/dansguardian/privoxy/squid. My current rules for the redirect are: REDIRECT loc 81 tcp www - !192.168.100.0/24 ACCEPT fw net tcp www How do I set this so that all the request are redirected except for requests FROM a certain machine (192.168.100.11)? I

Goodday, First my network layout: dsl router (10.0.0.99) | server (eth0 10.0.0.1, eth1 10.0.1.10) | 3 times windows machine (10.0.1.2, 10.0.1.3, 10.0.1.4) (all with proxy settings 10.0.1.10:8080) Now on the server is mandrake 10 installed with shorewall as firewall. And a apache webserver (and no ftp server). When i turned internet sharing on it started squid which added a line in the

Dear All, Linux Kernel 2.4.20-8 Running Shorewall 2.2.0 ip addr show 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 brd 127.255.255.255 scope host lo 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100 link/ether 00:48:54:53:82:45 brd ff:ff:ff:ff:ff:ff inet 62.68.254.178/28 brd

ive got a config thats client -> server ->Dansguardian->Squid -> onward adn I want to transparently redirect web traffic to DG/Squid Not sure where the problem lies - hoping you guys can help me and at least tell me that its NOT my shorewall config heres the configs When I point a browser straight at 3128 or 3129 I get web pages back and the appropriate stuff in the logs . I get a