similar to: ShieldsUp scan

Any help here? I have included all of the output of the suggested diags that Thomas said I should run, but I admit that I'm not sure what I'm looking for, as I'm not familiar with RPC functionality on Linux. Something is not working with RPC on my Samba 4.0.3 server. (FWIW, it doesn't work with IPTables stopped either.) > On Mon, Feb 25, 2013 at 2:21 PM, Mike Stroven wrote:

Hi, I''m new to shorewall and iptables. I installed shorewalls ver. 2.2 two days ago and it''s working now, but I have some questions concerning pppoe. I have my ISP''s connection to internet trough PPPoE over an ethernet card. On the ethernet card I have a static IP and I have access to all other ISP''s clients wich are in the same subnet (it''s a small

I moved an entire RH 6.2 server from one CPU to a new one using a tape backup/restore. Everything from the old server is working on the new server, but when SysV starts up smb, the nmbd daemon (2.0.6) exits with an error: create_subnets: No local interfaces! eth0 has already started according to the logs and console. Any ideas? Thanks. ______________________ Greg Kelley, IT Director SSA, EAA,

Hi, see the log below root at AsteriskSlave:~# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: p3p1: <BROADCAST,MULTICAST> mtu

Hi, I have already tried to change for bindaddr=0.0.0.0 but it didn't worked. 2016-08-26 11:44 GMT-03:00, Frank Vanoni <mailinglist at linuxista.com>: > On Fri, 2016-08-26 at 10:12 -0300, Vitor Mazuco wrote: > >> bindaddr = all > > Try: > > bindaddr=0.0.0.0 > > > > > -- > _____________________________________________________________________

I just see warning? 2016-08-29 11:30 GMT-03:00, Telium Technical Support <support at telium.ca>: > This shows that asterisk's IAX is already bound to all adapters - so that's > good. Symptomatically does your IAX stop working? Or do you just see a > warning? > > -----Original Message----- > From: asterisk-users-bounces at lists.digium.com >

Oh! In that case ignore it. Asterisk won't rebind the adapter if you've only changed parameters. The message is misleading -----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vitor Mazuco Sent: Monday, August 29, 2016 10:41 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

Le 30/09/2019 ? 17:53, Gwaland a ?crit?: > looks like it was updated due to a segfault. > https://bugzilla.redhat.com/show_bug.cgi?id=1750550 > https://bugzilla.redhat.com/show_bug.cgi?id=1253662 Now I'm even more puzzled. Fedora and EPEL sport SquidGuard 1.4.36. Now when you search for "squidguard", this seems to be the project site: * http://squidguard.org/index.html

Dear all, I installed "dovecot dovecoot-mysql postfix and postfix-mysql" from debian repository 7. I start them with "/etc/init.d/postfix start" and "/etc/init.d/dovecot start" but When i use nmap localhost I see the following output: root at sito:/etc/dovecot# nmap localhost Starting Nmap 6.00 ( http://nmap.org ) at 2013-09-12 07:35 IRDT Nmap scan report for

Hi all, I have created a squid class that also installs squidGuard. When I run puppetd I always get notice: //Node[xxxx.xxxxxx.xxx]/squid/squid::install/ Package[squidGuard]/ensure: ensure changed ''purged'' to ''present'' even though the package is already installed - why is this change in package status happening as it then triggers my exec resource which is

I''m having a problem with the Shorewall firewall and CUPS printing interfering with each other. My Linux firewall machine is acting as both a CUPS server and client for all of my tests. Shorewall 2.0.13 CUPS 1.1.22-2 Linux kernel 2.6.9 CUPS was working fine to print to my Epson C84 (network connected via a Netgear PS101 print server using lpd://PS101.IP.address/raw ) until I

Hi list, Has anyone here use SquidGuard for their Squid proxy running in CentOS4.4 to block list of bad sites? Is the RPM available using yum? Any feedback using this software appreciated. Thank you very much. junji linux registered user #253162 Send instant messages to your online friends http://uk.messenger.yahoo.com

Dear It is possible to configure Samba 4.4.5 to accept queries that do not use TLS? I'm having trouble authenticating the Proxy / SquidGuard in AD Samba 4.4.5. I get this error: (squidGuard): ldap_simple_bind_s failed: Strong(er) authentication required I read the wiki Samba, the new versions are working with authentication TLS encrypted connections. It is possible to configure Samba

On Mon, 30 Sep, 2019 at 23:47:02 -0700, John Pierce wrote: > On Mon, Sep 30, 2019 at 10:26 PM Nicolas Kovacs <info at microlinux.fr> wrote: > > > Le 30/09/2019 ? 17:53, Gwaland a ?crit : > > > looks like it was updated due to a segfault. > > > https://bugzilla.redhat.com/show_bug.cgi?id=1750550 > > > https://bugzilla.redhat.com/show_bug.cgi?id=1253662

help!....im really confused, ... i created the user "Stealth" on my Linux redhat 7.3 machine and when i configure my smb.conf file, for path = /home/Stealth, the machine would show up in "Computers Near Me" on my other windoez 2000 machine, but would not accept any passwords to the [share], when i run smbpasswd -a Stealth i get this......... getsmbfilepwent: malformed

Hi, The SquidGuard URL redirector has recently been updated in EPEL, and I'm a bit puzzled. I'm still using SquidGuard on a few local proxy servers running CentOS 7, because it's a nifty piece of software for filtering web traffic. The project's home page has remained unchanged for more than ten years: * http://www.squidguard.org/ It looks like the project has been dormant or

I can run nmbd successfully, but smbd dies almost immediately when I run it, the smbd.log file has the message "bind failed on port 139 socket_addr = 0.0.0.0.". When I do a netstat -an | grep 139, it shows that tcp is listening on port 139. How do I resolve this conflict between tcp and smbd?

Hi it's possible with wbinfo that get a information: 1- Get all users of one Active Directory Group 2- Get all groups of one username ? (i want create a small perl script for add automatiquely user into Squidguard, other user say me that Squidguard can't directly get the Active DIrectory Group (only use username) Thanks for your help

Stealth Communications Announces Registry to Avoid Access Fees Posted on: 04/23/2004 Stealth Communications Inc. today announced the official launch of a registry that allows service providers routing calls over the Internet to avoid paying local phone companies access charges. The VPF ENUM Registry allows carriers to map telephone numbers to IP addresses for such things as SIP phones and

Hi, I´m have a Samba 4 Domain Member that I use like a Proxy Server. I use Squid with NTLM Athentication and work perfecly. My problem is Squidguard with NTLM Authentication. If I use Samba 4.2.X in my Samba 4 Domain Controler I watch in Squid LOG only the user name but If I use Samba 4.1.x or 4.3.0 in my Domain Controler I watch in Squid LOG domain\\user name and Squidguard Authentication not